2
Rotary table, rotary indexing table, dividing head, dividing head
Hh9xei3p3
-Three-jaw chuck: Ø 140 mm
-Height: 185 mm
-Max. 8 divisions can be set
-Bore center: Ø 35 mm
-Weight: 30 kg
4
centre height 130 mm
spindle bore 18 mm
ratio 40:1
swivellable - 10° bis 90° °
groove width 16 / 18 mm
weight 35 kg
dimensions of the machine ca. 0,5 x 0,25 x 0,25 m
Unused semi-universal dividing set:
- Spindle in precision tapered roller bearings
- Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground
Czfyz7lh
- Translation disengageable for direct sharing
- each division 2 to 50 and many divisions to 380
accessories:
Tailstock, 2 part washers, centering point, driver and chuc...
10
centre height 390 mm
passage of steadyrest 220 mm
chucking diameter 400 mm
B03mwzcj2t
total power requirement / kW
5
Dividing head, spiral milling device, dividing head, dividing attachment, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
Qkoq2ymkc
-Part head
-Distance between centers: 450 mm
-Take: SK40
-suitable for: milling cutter grinding
-Translation: 1:40
-swiveling
-Weight: 60 kg
2
Tailstock counter bearing for dividing head, dividing attachment
-Tip height: 95-115 mm
-Recording: MK2
Qlfur8x9u
-Dimensions: 180/100/H110 mm
-Weight: 4 kg
4
Dividing head, dividing head dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
3tliqrin
-with translation
-Shaft holder: Ø 20 mm
-Dimensions: 470/230/H240 mm
-Weight: 30 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
Utp2co23y
-Tip height: 135 mm
-Height: adjustable
-Recording: MK2
-Drawing with the photos
-Dimensions: 220/120/H140 mm
-Weight: 11.4 kg
5
Spiral milling device, dividing head, dividing attachment, rotary table, rotary table
-Admission inside: SK40
Vbw9pezl8
-Tip height: 65 mm
-Distance between centers: 440 mm
-Passage: Ø mm
-Reversing coupling for: left u. Right spiral
-Pivotable for conical spirals: 0 - 45 °
-Dimensions: 760/430/H310 mm
-Weight: 61 kg
5
Dividing head, dividing head, rotary table, rotary table
-with translation: 1:40
-Admission inside: MK4
-Tip height: 165 mm
-swiveling
Vakyfe2tr
-Dimensions: 600/500/H300 mm
-Weight: 84 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 257 mm
-Admission:
B2ruj0l0
-Drawing with the photos
-Dimensions: 350/250/H270 mm
-Weight: 41 kg
5
Dividing head, spiral milling device, dividing attachment, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
-Accessories: for tool grinding machine
-Take: SK40
-Tip height: 110 mm
-Part head: swivel/rotatable/tiltable
-Dimensions: 420/350/H240 mm
Hpm0gqt
-Weight: 38 kg
5
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine
03l2kkqfs
-Tip height: 135 mm
-Admission:
-Dimensions: 165/300/H190 mm
-Weight: 8 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 150 mm adjustable
-Admission:
-Dimensions: 250/130/H155 mm
B9sevbv
-Weight: 12.6 kg
5
Dividing head, dividing head, rotary table, rotary table
-with translation: 1:40
-Admission inside: MK4
-Tip height: 100 mm
-Part head: swiveling
-Dimensions: 320/320/H230 mm
2xyhj8msg
-Weight: 37 kg
5
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
Lzc08rr
-Accessories for tool grinder
-Take: SK40
-Tip height: 100 mm
-swiveling
-Dimensions: 640/260/H290 mm
-Weight: 48 kg
4
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine
-Adjustable tip height: 150-345 mm
-Angle: adjustable
Lyzjy7q
-Recording: MK2
-Dimensions: 320/280/H600 mm
-Weight: 47 kg
4
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
-Accessories: for dividing head
-Socket: Ø 65 mm
-Grooves: 16 mm
2k0hjcbbb
-Dimensions: 370/210/H120 mm
-Weight: 7 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Tailstock comes: from a Gildemeister lathe
-Tip height: 270 mm
-Quill: electrically driven
-Foot switch
-Recording: MK5
-Number: 2x tailstocks available
-Price: per piece
Gt0uptez
-Dimensions: 820/250/H400 mm
-Weight: 136 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Tailstock comes: from a Gildemeister lathe
-Tip height: 325 mm
-Quill: electrically driven
-Recording: MK5
-Dimensions: 360/1040/H510 mm
-Weight: 272 kg
D2behjiy0
5
Dividing head, dividing head, rotary table, rotary table
-with translation: 1:40
-Admission inside: MK4
-Tip height: mm
-Passage: Ø 32 mm
-Part head: swiveling
-Dimensions: 430/430/H280 mm
-Weight: 83 kg
7pgswobt8
5
Dividing head, dividing head, rotary table, rotary table
-with: grid
-Take: inside collet
-Tip height: mm
Bpiiy3fs
-Passage: Ø mm
-Part head: swiveling
-Dimensions: 440/190/H200 mm
-Weight: 43 kg
3
Tailstock, counter bearing for dividing head, dividing attachment
9qyfswtoj
-Tailstock comes: from a Gildemeister lathe
-Tip height: 240 mm
-Recording: MK4
-Dimensions: 560/255/H440 mm
-Weight: 80 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Height: adjustable
-Recording: top
-Dimensions: 245/280/H200 mm
Yrln8c
-Weight: 28 kg
4
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 135 mm
Muhrog
-Height: adjustable
-Recording: MK2
-Drawing: in the photos
-Dimensions: 240/115/H140 mm
-Weight: 11.8 kg
5
Rotary table, rotary indexing table, dividing head, dividing head
-Three-jaw chuck: Ø 190 mm
-Height: 320 mm
-Bore center: Ø 57 mm
-Rotary table: swiveling
-Dimensions: 360/310/H320 mm
Bdcdv8co8g
-Weight: 64 kg
5
Rotary table, rotary indexing table, dividing head, dividing head
-Three-jaw chuck: Ø 190 mm
-Height: 195 mm
-Bore center: Ø 57 mm
-Dimensions: 355/200/H245 mm
-Weight: 42 kg
Bdcdsvfrb2
5
Rotary table, rotary indexing table, dividing head, dividing head
Bdcdtih3j7
-Three-jaw chuck: Ø 190 mm
-Height: 195 mm
-Bore center: Ø 57/40 mm
-Dimensions: 310/220/H195 mm
-Weight: 28 kg
4
Rotary table, rotary indexing table, dividing head, dividing head
-Four-jaw chuck: Ø 165 mm
-Height: 185 mm
-Dimensions: 240/320/H185 mm
Nceyd
-Weight: 24 kg
5
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
-Accessories for: tool grinding machine
Nhutt
-Adjustment: SK50
-Tip height: 145 mm
-Part head: swiveling, rotatable
-Dimensions: 220/220/H285 mm
-Weight: 17 kg
5
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine
-Tip height: 95-205 mm adjustable
-Recording: MK2
-Dimensions: 275/260/H265 mm
Btvtiif
-Weight: 23 kg
4
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
Fq2bjaz
-Accessories for: dividing head
-with: hand crank
-Dimensions: 390/400/H200 mm
-Weight: 28 kg
3
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine
Muk7oo
-Bores for guide: Ø 30 mm
-Dimensions: 170/200/H110 mm
-Weight: 4 kg
5
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
-Accessories for: tool grinding machine
-Recording: MK5
Iawbojj9y
-Tip height: 145 mm
-Part head: swiveling
-Dimensions: 250/230/H300 mm
-Weight: 23 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 120 mm
-Admission:
-Drawing: in the photos
Ipwtojgmi
-Dimensions: 200/70/H130 mm
-Weight: 4 kg
5
Dividing head, spiral milling device with all accessories
-comes: from a lid FP2
Bd98guqs7b
-Part head with: counter bearing
-Change gears
-dividing disks
-Distance between centers: 415 mm
-Take: SK40
-suitable for: milling cutter grinding
-Translation: 1:40
-Part head: swiveling
-Dimensions: 820/390/H440 mm
-Weight: 80 kg
3
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 155 mm
Vsmwme
-Admission:
-Drawing: in the photos
-Dimensions: 140/100/H180 mm
-Weight: 4.6 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 90 mm
Bdzzyxqlz7
-Admission:
-Drawing: in the photos
-Dimensions: 140/135/H160 mm
-Weight: 4.7 kg
5
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine
Xziupo0
-Tip height: 130 mm
-Recording: MK2
-Adjustment of the tip from the center: + - 25 mm
-Dimensions: 240/210 / H160 mm
-Weight: 7 kg
4
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 155 mm
-Admission:
-Drawing: in the photos
-Dimensions: 165/245/H220 mm
-Weight: 6 kg
Njayd
5
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
Bdj9uccq2s
-Accessories for: tool grinding machine
-Recording: MK5
-Tip height: 130 mm
-Dimensions: 270/190/H200 mm
-Weight: 15 kg
3
Tailstock, counter bearing for dividing head, dividing attachment, lathe
Bdpqouhvi7
-Tailstock comes: from a Gildemeister lathe
-Tip height: 235 mm
-quill stroke: 300 mm
-Recording: MK4
-Dimensions: 535/235/H370 mm
-Weight: 85 kg
3
Tailstock, counter bearing for dividing head, dividing attachment, lathe
-Tailstock comes: from a lathe
-Tip height: 180 mm
-Recording: MK4
-Dimensions: 540/250/H310 mm
-Weight: 65.5 kg
Nlrgz
4
Dividing head, dividing head dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder
-Tip height: 105 mm
-Dimensions: 270/130/H165 mm
-Weight: 13.3 kg
Nmrob
3
Tailstock, counter bearing for dividing head, dividing attachment
X3iccke
-Tip height: 185 mm
-Dimensions: 235/120/H170 mm
-Weight: 32 kg
5
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 100 mm
-Socket: Ø 12 mm
-Dimensions: 111/120/H170 mm
-Weight: 4 kg
Qf33cw
4
Tailstock, counter bearing for dividing head, dividing attachment, lathe
-Tailstock comes: from a lathe
-Tip height: 145 mm
-Recording: MK4
-Dimensions: 410/260/H320 mm
Beo8ecpldm
-Weight: 51 kg
