Angular clamping device for sale
4
-Clamping angle to workpiece clamping, clamping aid
-Dimensions: L/W/H 280/153/197 mm
-Wall thickness: 18 mm
-Long hole: 13 x 132 mm
-Bores below: Ø 17 mm
Ff28jtq0q
-Surface: milled
-Weight: 13 kg
4
length:1000 mm
width:800 mm
Hzuwq8jv
height:1600 mm
weight of the machine ca.:1,2 t
dimensions of the machine ca.:1,0 x 0,8 x 1,6 m
8
Angle plates 2200 x 1000 x 4000 mm
MACH - ID 6906
Make: STOLLE
B2glszu7vs
Type: Angle 4000
YOP: 1995
Specifications
US Standard Metric
Number of T slots
15
Jump from T to T
250 mm
T size
36 mm
Number of matching pieces
5
Dimensions
Length
2.200 mm
Width
1.000 mm
Height
4.000 mm
Weight
7.500 kg
Number of T slots: 15
Jump from T to T: 250mm
T size: 36mm
Number of matching pieces:5
Length: 2.200 mm
Width: 1.000 mm
Height: 4.000 mm
Weight: 7.500 kg
Please Note: The ...
9
Casting clamping angle Fabr.SAV Typ:AW71863 Bj.ca.2010
Bz3kam2uss
As good as new with 315mm Röhm chuck bore 100 mm
Width : 500mm Depth : 310 mm
Height without base plate: 550 mm Height with base plate: 585 mm
Base plate : 500 mm X 400mm
Center height : Chuck : 325 mm
is hardly used
Very good condition
with chuck key .
4
length: 1050 mm
Bbsgijzu
width: 1200 mm
height: 1600 mm
depth: Länge/Tiefe: 1050 mm
weight of the machine approx.: 2483 kg
- vertical clamping surface: height: 1600mm; width: 1200mm
- clamping surface is smoothed
- 8x T-slots according to DIN 650:
- a=36; h=61; b=61; c=26 mm
- base clamping surface: depth: 1020mm; width: 1250mm
9
plate width 750 mm
plate depth 1000 mm
plate height 500 mm
B02gkkttsz
Swiveling cube table for radial drilling machines.
Dimensions
Table length: 1000 mm
Table width: 750 mm
Table height: 600 mm
0 to 90 ° adjacent.
5
Clamping angle for workpiece clamping, clamping aid
Ezbqljb
-Dimensions: L/W/H 300/195/295 mm
-Wall thickness: 31/28 mm
-Long hole: 22 x 90 mm
-Bores: Ø see photos
-Weight: 28 kg
4
length:3000 mm
width:1500 mm
size clamping area:3.000 x 1.500 mm
size base area:1.500 x 1.200 mm
weight of the machine ca.:6210 kg
The STOLLE clamping angles are manufactured in a stable,
box-shaped cast construction
made of dense special cast iron with steel addition.
The outer surfaces are machined according to DIN 876/III,
the edges are angular to it.
The clamping surface contains 14 T-slots according to DIN 650-28H12
at intervals of 200 mm as well as additional 660 threaded holes M 24
Becwz...
7
Cast iron angle plate 2500 x 1000 x 6000 mm
MACH - ID 6908
Make: STOLLE
Type: Angle 6000
YOP: 2010
Specifications
US Standard Metric
Number of T slots
20
Jump from T to T
250 mm
T size
36 mm
Number of matching pieces
2
Dimensions
Length
2.500 mm
Width
1.000 mm
Height
6.000 mm
Clpvqkgj
Weight
14.500 kg
Number of T slots: 20
Jump from T to T: 250mm
T size: 36mm
Number of matching pieces:2
Length: 2.500 mm
Width: 1.000 mm
Height: 6.000 mm
Weight: 14.500 kg
Please N...
3
length 800 mm
width 450 mm
height 800 mm
total power requirement kW
weight of the machine ca. 0,5 t
dimensions of the machine ca. m
Nlpoh
6
length: 1800 mm
width: 2000 mm
height: 3000 mm
Cojtclh7m
depth: Länge/Tiefe 1800 mm
weight: ca. 10,3 t
There is still 1 piece of angle plate available for sale. All others are sold.
Steel construction, welded, surface finished.
Size of the angle: W: 2000 x D: 1800 x H: 3000mm
Clamping surface vertical: H:3000xB:2000mm
Holes on/in clamping surface 400 x 50 and 200 x 53mm, with M30 threaded holes and through holes
Clamping surface base stand: W:2000 x D:1800mm
Clamping hole Ø 51mm drilled in co...
2
length 800 mm
width 800 mm
height 1000 mm
S8nnwh
5
Clamping angle, clamping aid
-Clamping angle: for workpiece clamping
-Wall thickness: 30 mm
-Bores: Ø 18/20 mm, see photos
-Number: 2x angles available
-Price: per piece
-Dimensions: 165/140/H245 mm
-Weight: 13.1 kg
Btlj7ildvb
6
length 1050 mm
Bq0k8tb7xh
width 500 mm
height 1000 mm
weight of the machine ca. 600 kg
2 pieces available, the price is for one piece.
Machine dealer with own stock of 2500 m².
3
height 4,000 mm
width 1,010 mm
depth 1,200 mm
framing thickness 90 mm
weight approx. 5,500 kg
Cpdraff8
3
length 800 mm
width 500 mm
height 1000 mm
power capacity kW
Biugubaa3v
weight of the machine ca. 0,3 t
dimensions of the machine ca. m
2 units
3
length: 655 mm
width: 800 mm
height: 1000 mm
depth: Tiefe/Länge: 655 mm
weight of the machine approx.: 641 kg
Clamping surface is rough-machined
good used condition, slight signs of use
Bewiezzeuu
- T-slots according to DIN 650:
- a=28; h=50; b=50; c=21 mm
- centre distance = 160mm
Clamping surface of the foot: depth: 655mm x width: 800mm
7
length 690 mm
thread M16
height 1020 mm
weight of the machine ca. 360 kg
Bt8uek8vto
Angle table with breadboard table LxWxD: 1020x690x40 mm
Fixing LxW: 330x690 mm
Thread: M16
Weight: 360 kg
3
Clamping angle for workpiece clamping, measuring device
Yigowmseb
-Dimensions: 400/350/H230 mm
-Thickness: 35 mm
-Groove: 15 mm
-Surface: milled
-Weight: 48 kg
3
length 1200 mm
width 900 mm
height 1500 mm
weight of the machine ca. 1 t
Cmbhc32e
Machine dealer with own stock of 2500 m².
3
width 550 mm x height 750 mm
Zabqxu3
depth 500 mm
T - slots width 20 mm
wall thickness 60 / 35 mm
weight approx. 235 kg
5
length:1.000 mm
width:500 mm
height:2.500 mm
3 pc. clamping angle h= 2.500 mm, w=500 mm, feet length 1.000 mm
B0tah8uitn
2
length: 640 mm
width: 800 mm
height: 1000 mm
depth: Tiefe/Länge: 640 mm
weight of the machine approx.: 570 kg
Clamping surface is rough-machined
good used condition, slight signs of use
- T-slots according to DIN 650:
- a=28; h=50; b=50; c=21 mm
- centre distance = 160mm
Clamping surface of the foot: depth: 655mm x width: 800mm
Bs0ikyk3km
4
depth 1100 mm
height 5200 mm
Bt8vz9skjc
length 1100 mm
weight 7120 kg
4
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube
Jteenq
-for: scribing plate, clamping plate
-Dimensions: 151/78/H132 mm
-Weight: 6.2 kg
8
Cast iron angle plates 1500 x 1000 x 2300 mm
MACH - ID 6842
Make: STOLLE
Type: DD 2300
YOP: 1998
Specifications
US Standard Metric
Number of T slots
11
Jump from T to T
200 mm
T size
28 mm
Number of matching pieces
Bz2ois33zp
2 matching pieces
Dimensions
Length
1.500 mm
Width
1.000 mm
Height
2.300 mm
Weight
6.600 kg
Number of T slots: 11
Jump from T to T: 200mm
T size: 28mm
Number of matching pieces:2 matching pieces
Length: 1.500 mm
Width: 1.000 mm
Height: 2.300 mm
...
3
width 295 mm x height 950 mm
depth 510 mm
Oodyz
T-slots width 21 mm
wall thickness 90 / 55 mm
weight approx. 345 kg
5
length:2.500 mm
B0tai2hzpq
width:750 mm
height:1.250 mm
3 pc. clamping angle h= 2.500 mm, w=500 mm, feet length 1.000 mm
2
length: 250 mm
width: 400 mm
height: 305 mm
weight: je ca. 56kg
dimension L-W-H: 250 x 400 x 305 mm
- clamping surface vertical = H: 305mm x W: 400mm
- clamping surface foot L: 250mm x W: 400mm
Bbzeauska9
- T-slots according to DIN 650: a = 18.0mm; h = 30.0mm; c = 11.5 mm; with 2x horizontal and 4x vertical; center distance Horizontal slot = 152mm and vertical slot 90mm
- clamping area of the foot: L: 250mm x W: 400mm
6
length 1000 mm
width 800 mm
height 630 mm
Bt8xan0abd
weight 460 kg
T-slot - width 50 mm
Clamping table, clamping plate, T-slot table
Dimensions
Table length: 1000 mm
Table width: 800 mm
Table height: 630 mm
T-slot length: 50 mm Weight: 460 kg
5
Clamping angle for workpiece clamping
Blicplzu
-Dimensions: 200/320/H220 mm
-Thickness: 25 mm
-Groove: 20 mm
-Surface: milled
-Weight: 22.7 kg
2
Clamping bracket 320 mm x 320 mm x 220 mm
Uw9odrq
5
clamping surface
- 710 x 710mm
- 710 x 460mm
pivoting range 90°
Pjtbl
manually pivotable by hand crank
lockable
width of t-slots 22 mm
6 + 3 t-slots
height 650 mm
weight approx. 580 kg
4
Offer 21437
Technical data:
- Width approx. 1000 mm
Ezcnkbj
- height approx. 800 mm
- depth approx. 620 mm
- panel thickness T - groove side approx. 60 mm
- 5 T-slots L 1000 mm
- Centre distance of the T-grooves 120 mm each
- Distance from outside 80 mm
- T - groove width approx. 24 / 40 mm
- T - groove depth approx. 20 / 35 mm
- Short side with various long holes
- Weight approx. 550 kg
3
Angle cast (24312)
Width 315 mm
Height 320 mm
T slot 18 mm
Floor area 220 x 315 mm
Weight 50 kg
F9r7zwe8u
9
length 995 mm
width 500 mm
height 30 mm
weight of the machine ca. ca. 300 kg
Bt8t2m2m0q
Angle table with hole ratchet
Table LxWxD: 995x500x30 mm
Fixing LxW: 430x500 mm
Weight: 300 kg
5
Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements, console, angle console
-Angled bracket: with T-slot and measuring rail
Izgwdd9
-T groove: 14 mm
-Number: 2x angles available
-Price per piece
-Dimensions: 505/180/325 mm
-Weight: 24 kg/pc.
5
For sale are several unused clamping brackets.
3x 2-sided clamping angle
2x clamping cube
Dimensions 2-sided clamping angle:
base plate 300x400x40mm
clamping surface 330x500x80mm
Dimensions clamping cube:
Base plate 300x400x45mm
cube 410x270x270mm wall thickness 40mm
Dcqs00ogk
unit price 450,00€ net
4
clamping surface 1,380 x 970 mm
T-slots width 20 mm
floor area 1,200 x 630 mm
wall thickness 65 mm
weight approx. 1,370 kg
Bw8yi0o8ni
5
OFFER 21381
Technical data:
Zd9xs
- Width approx. 900 mm
- height approx. 1250 mm
- depth approx. 780 mm
- panel thickness T - groove side approx. 75 mm
- 10 pieces T-grooves L 900 mm
- Centre distance of the T-slots 125 mm each
- Distance from outside 60 mm
- T - groove width approx. 18 / 32 mm
- T - groove depth approx. 20 / 35 mm
- Plate thickness hole side 60 mm
- Div. clamping holes in the short clamping side / hole side Ø 18 mm
- Weight approx. 1300 kg
3
2 angle
8d2rnfnfy
Height 240 mm
Width 210 mm
Thickness 35 mm
Surface 145 x 210 mm
Weight per piece 16 kg
1
used T-slot clamping angle
technical data:
Dimensions
height 1120 mm
width 320 mm
Bvhjuznggt
with
- 7 horizontal T-slots
used, in good condition
3
Clamping angle, clamping angle, clamping tower, clamping devices, mechanical clamping elements, grooved plate, pallet changer, pallet changing system, clamping cube, clamping tower, clamping box
-Clamping angle for: workpiece clamping
-Dimensions: 500/400 / H425 mm
-Wall thickness: 100 mm
-Threaded holes: M12
-Hole spacing: 40 mm
93dsoozbv
-Quantity: 1x piece available
-Weight: 170 kg
2
Angle cast
Technical data:
Width 500 mm
Height 630 mm
Projection rear 400 mm
Wall thickness 65 mm
with
-5 Hor. T-slots 40/22 mm
used
Zdhdopwf
2
length - 800 mm
breadth-base - 400 mm
Yxcrbvwzp
height - 700 mm
welded assembly
weight approx. 90 kg
3
clamping area: 630 x 800 mm
Bzmtjm8p9x
3
Angle
Width 800 mm
Height 800 mm
Depth 400 mm
Thickness 40 mm
Juqnqm
2
clamping angles 1300x1200
Vgtte2kb
7
Clamping table, clamping angle, T-slot table, rotary table, milling machine table
-Table surface: 210 x 570 mm
-T grooves: 3
-rotatable and swiveling
-fits for Deckel Mikron WMW and other milling machines
Sq9w0c
-Weight: 95 kg
4
Cast iron angle
778aofo
Clamping surface size 800 x 250 mm
70 mm thickness of plate
Depth 500 mm
Stand area 250 x 500 mm
with:
-5 pieces horizontal T-slots 38/22 mm
used, in good condition
