Used Exhaust systems for sale (54)

Condition: good (used), Year of construction: 2007, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system -Manufacturer: Keller, dry separator type Vario 2 -Power of dust extraction fan: 5.5 kW / 2850 rpm -Volume flow: 3300 m³/h Bwobeudqbvj Ha R Eyol -Total pressure: 3.50 kPa -Individual components/technical data: see photos -Dimensions: 1915/1100/H3260 mm -Weight: 1180 kg

Condition: good (used), 2 LOSMA aspirations Bwob Haowgv Scs R Eyel

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 3163870, overall weight: 700 kg, total width: 800 mm, total length: 1,300 mm, total height: 2,400 mm, volume flow: 1,500 m³/h, - Operating voltage: 230/400 V Bob Hsv Tq Hcea R Eyewl - Frequency: 50 Hz - Connected load: 4 kW - Operating pressure: ±50 mbar - Max. operating temperature: 40 °C - Separator type: Wet separator - Air flow rate: 1,500 m³/h - Available negative pressure at the raw gas connection: 700 Pa - Max. sound pressure level: 75 dB - Nominal diameter of the clean gas connection: 450 mm - Water capacity of the disposal container: 150 l - Fan data – Total pressure: 5,000 Pa

Condition: like new (used), Power: 7.5 kW Voltage: 280 V / 50 Hz Bob Hjwhdvfsa R Eyewl

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Beb Hajwg A Hyj R Eyswl Negative pressure approx. -27m/bar Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Motor 2.2 kW .

Condition: used, Centrifugal fan NICOTRA - Gebhard type REM 18-0500-4W-16-C RD/0 Make No. 142-943705-458068/1 Year of manufacture 2012 Bob Ha Ropp D Ivj Eyswl Volume flow max. 10825 m³/h = 180m³/min. density 1,2 kg/m³ Air inlet Ø 500 mm Air outlet 640 x 320 mm Motor speed 1440 rpm. Motor power 2,2 kW Mains connection 400 Volt 50 Hz - fan wheel with 12 fan blades - direct flanged drive motor - mounted adapter ring with flex sleeve Ø 500 mm - adapter flange for air inlet from Ø 500 to 600 x 305 mm rectangular flange - Galvanized sheet metal housing Space requirement L x W x H 950 x 750 x 890 mm Space requirement with pallet L x W x H 1270 x 990 x 1500 mm Weight centrifugal fan 110 kg weight with pallet 135 kg very good condition

Condition: good (used), Year of construction: 2005, machine/vehicle number: 6678, type of input current: three-phase, input voltage: 400 V, overall weight: 255 kg, total width: 660 mm, total length: 660 mm, total height: 2,200 mm, volume flow: 1,500 m³/h, noise level: 68 dB, filter area: 15 m², intake manifold diameter: 200 mm, power: 2.2 kW (2.99 HP), frequency: 50 Hz, temperature: 30 °C, ambient temperature (min.): 5 °C, KAPPA extraction/compact dust extractor Bebjv Ia Hbs Ha R Eyjwl The extraction was active on our 3D laser. For indoor use only.

Condition: used, Year of construction: 2012, Technical details: flow rate: 1000 m³/h Bob Hasv Scqko R Eyewl current: 400 V / 16 A A temperature range: Betriebstemperatur: 5 - 50 °C total power requirement: 1,5 kW weight of the machine approx.: 96 kg dimension machine xH: 0,65 x 0,65 x 1,1 m OIL MIST EXTRACTION is prepared with nozzle and pipe for connection to a CIP cleaning system. The CIP cleaning system is very often used in hygienic industries such as the food, beverage and pharmaceutical industries. HEPA filter *

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm Bwjb Haerw A U Ie R Eyjl -Weight: 120 kg

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. Bwjb Ha R Esv T Db Tsyjl The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Connection: 100 mm #8347

Condition: new, Special price €2,500 instead of €3,410 excl. VAT. Dormatec AirBench FN066784A - Extraction Table Capacity: 1500 m³/h Filter Category: A Bobevdruio Ha R Eyowl Thanks to a wide range of filters, the extraction tables are suitable for all types of contamination (metal, plastic, stone, wood, glue fumes, etc.). Dust, steam, or fumes are immediately extracted through the work surface. The extraction tables are available in various sizes and configurations. All you need is a power outlet: plug & play! Like the FP model, the FN extraction table is a welded steel table with a load capacity of 150 kg on the tabletop and access to the filters is provided at the front of the table. - Industrial design - Robust welded filter housing made of 2 mm sheet steel - Steel surface made of 3 mm sheet steel - Perforated dia. 4 mm - Surface treatment: Powder coating in RAL 7035 (light gray) Filter: A - Non-sparking dust Aluminum, plastics, atmospheric dust, flour or similar, fiberglass, cleaning aircraft electronics Technical specifications: - Capacity: 1500 m³/h - Power: 0.17 kW - Suction area: 610 x 656 mm - Table dimensions W x H x D: 674 x 660 x 840 mm

Condition: new, Year of construction: 2017, operating hours: 1 h, Functionality: fully functional, suction capacity: 1,450 m³/h, New extraction system to be sold due to company closure. Bweb Hajv T I H Tj R Eyel

Condition: good (used), Year of construction: 2017, Functionality: fully functional, total width: 950 mm, total height: 3,530 mm, table width: 840 mm, space requirement length: 1,680 mm, table height: 1,600 mm, For sale is a wet scrubber with type approval, approved for the separation of aluminum dust. The system consists of two extraction tables with a width of 1680 mm, a filter, and intake lines. The exact dimensions can be found in the attached drawing. A detailed description can be provided upon request. The new price of the system was approximately €35,000. The system was only used for approximately two years as a project. It was in very good condition. Built in 2017. Operation of the wet scrubber is permitted in Zone 22. A current inspection report for the system is available and is valid until June 24, 2025. The system must be dismantled on site. We can arrange transport if necessary. Bjb Haov Nhgrs R Eyswl For further information, please contact Mr. Spieles.

Condition: used, Year of construction: 2008, Technical details: filter cartridge type: mechanisch air flow rate: Nenn-Volumen: 1.330 m³/h air flow rate: min.-Volumen: 1.108 m³/h total power requirement: 3 kW weight of the machine approx.: ca. 270 kg Bob Haeu Nv Dce R Eyowl dimension machine xH: 1,7 x 0,78 x 2,0 m Industrial extraction system Sheet steel housing Can also be used for combustible dusts Dust extractor size Ø 580 x 1000mm, pipe connection Ø 160 x 60mm; mechanical filter Bar container size Ø 580 x 550mm; with an inspection window, with 4 wheels, 2x of which can be swiveled and braked *

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system, dust separator -Manufacturer: DCE dust extraction system type UMA 152 G5 -Extraction fan power: 3 kW -Inlet: Ø 200 mm -Individual components: see photos Bjb Ha Rov Inl Sj Eyowl -Dimensions: 1060/955/H2220 mm -Weight: 283 kg

Condition: good (used), Year of construction: 2002, ILT UNIFIL MS 1MRV40 – Industrial Air Filter / Extraction System for Oil and Emulsion Mist Technical Specifications: Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: UNIFIL MS 1MRV40 Year of Manufacture: 2002 Serial Number: 8160 Voltage: 3AC 400V Current Consumption: 3.2 A Frequency: 50 Hz Air Flow Rate: Approx. 2,700 m³/h (free-suction) Motor Power: 1.5 kW (Manufacturer: Siemens) Filter Stages: Multi-stage with pre-filter, main filter, and optional post-filter Housing Material: Robust sheet steel construction, painted Dimensions: Approx. L 1,145 mm x W 670 mm x H 1,150 mm Weight: Approx. 120 kg Connection: Pipe connection for exhaust air duct Available Condition: Used, functional, regularly serviced Bwob Ha R Eov Nv Nbsysl Description: For sale is a professional ILT UNIFIL MS 1MRV40 extraction system, a high-quality air filtration system for the efficient separation of oil and emulsion mists generated in metalworking and other industrial processes. The unit was specifically designed for continuous operation and does not require regeneration phases. It is ideal for turning, milling, grinding, and machining centers where airborne contaminants must be effectively filtered. Special Features: ✔ Highly efficient air filtration: Multi-stage filter system with washable pre-filters for a long service life ✔ Modular design: Filter inserts are replaceable and adaptable for different applications ✔ Energy efficient: Low power consumption with high extraction performance ✔ Robust construction: Sturdy housing for industrial environments, durable components ✔ Flexible installation: Can be installed directly on machines or centrally ✔ Easy maintenance: Tool-free filter replacement, low operating costs ✔ Made in Germany: High quality and reliable performance Areas of application: CNC machining centers Lathes, milling machines, and grinding machines Metal and plastics processing Industrial air purification in production facilities Oil and emulsion mist separation Shipping by freight forwarder available upon request Sold without warranty or guarantee. If you are interested or have any questions, please contact us!

Condition: used, Year of construction: 2015, air flow quantity 1800 m³/h Bwebovvxr Sj Ha R Eyjl suction power 1,275 kPa power capacity 1,5 kW weight ca. 125 kg Dimensions (HxWxD) 2,0 x 1,15 x 0,67 m One used oil dust collector - Produced in 53809 Ruppichteroth/ GERMANY - 3,13 A/ 50 Hz - 3AC 400 PE

Condition: used, Year of construction: 2023, Functionality: fully functional, overall weight: 120 kg, total width: 700 mm, total length: 550 mm, total height: 1,800 mm, volume flow: 1,500 m³/h, noise level: 60 dB, power: 0.76 kW (1.03 HP), The Airtower Compact 1500 is a lightweight, very compact plug & play filter tower. The device is suitable for extracting welding fumes. The two-stage filtration eliminates pollutants from the room air safely, economically and in a microbiologically inactive manner. Cleaned air is returned to the room near the floor without any drafts, while the contaminated air is sucked in at the top. The filter mat in the outlet openings supports the even distribution of the supply air and protects the device from external dust entering when the device is not in use. The air is conveyed by an EC fan with an integrated controller. This ensures efficient operation. The Airtower Compact 1500 scores points for the small amount of space required for installation. The integrated device control with operating display regulates the system and shows all important information. The system is designed for an average volume flow of 1,500 m³/h. The Airtower Compact 1500 was used as a demonstration machine, e.g. at trade fairs and at customers' premises. The system is therefore used, but works perfectly technically. After use, such as at trade fairs, the system was always cleaned and checked by our service technician. The Airtower is in stock. If collection is not possible, we can also organize shipping for you. We only need the delivery address for the transport costs. Bob Ha Rev Eu Nxj Eyjwl Please refer to the data sheet for the technical data of the system.

Year of construction: 2008, Condition: excellent (used), Acword BR100 Extractor with workstation Acword brand metal extractor with Bosch Rexroth workstation and drawer cabinet Exhaust air capacity 1010 m3/h  Connection spigot 100 mm  Noise level 83 dB Input under pressure 2550 Pa  Voltage 400 V Weight 65 kg Exhaust air velocity 32 m/s  Bobshufbcs Ha R Eyowl Frequency 50 Hz Height 1490mm Filtration area 6 m2  Motor power 1.1 kW  Width 594 mm Volume of waste container 0.0338 m3  Number of phases 3  Length 670 mm Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 1993, Technical details: motor capacity: 7,5 kW revolution per minute: 2860 U/min extraction suction socket - diameter: 200 mm electrics - voltage/frequency: 380 V/Hz weight of the machine approx.: 235 kg dimension machine xH: 1,0x1,0x1,65 m Dust Suction Device - impeller Dm = 600x160mm - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps dia = 140mm Bsb Ha Rou Nu Exs Eyswl - 90 ° arc dia = 250x600mm - 1x spare belts 15x1500mm *

Condition: good (used), Year of construction: 1998, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system -Manufacturer: BTR Environmental, Unicell cartridge dust extraction system -Type: C16-2K7 -Extraction fan power: 3.0 kW -Inlet: Ø 220 mm -Individual components: see photos -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg Bwsb Ha R Esu Uww Soyel

Condition: used, Year of construction: 1995, machine/vehicle number: 433/0695, input power 3.6 KW - 3 x 1.2 KW tank capacity 213 litres additional load 300 kg vacuum 22,000 Pa air rate flow 100 litres / sec. suction hose 50 mm electrical data 220 V / 3.6 KW Bwjb Hsiyzq Usa R Eysl space requirements width - 900 x depth - 1,100 x height - 1,900 mm weight approx. 150 kg  

Year of construction: 2007, Condition: good (used), Offer 22206 + 22207 Technical data: - Boom length approx. 6 m each Boboh Ekv Ej Ha R Eyjwl - 5 joints each - Suction pipe diameter 125 mm - Wall connection - brackets - Weight approx. 100 kg each

Condition: new, Model Name Bwsb Ha Rjgvqzcj Eyol Airtower FT 20.000

Condition: used, Technical details: filter cartridge type: mechanisch Bsb Ha Reu Nv A Ee Eyowl air flow rate: 1.330 m³/h total power requirement: 40 kW weight of the machine approx.: ca. 300 kg Mobile extraction system with wet separator - Industrial extraction system Use for combustible dusts (for aluminum and magnesium dusts); EX protected Construction: sheet steel housing Dust cartridge dust class M 10 m² and dust class H 10 m² Dust extractor: -size Ø 580 x 1,000mm -Pipe connection Ø 160 x 60mm -mechanical filter Dust container: -size Ø 580 x 550mm -with 4 wheels Ø 100x36mm) swiveling Water separator: -with 2" drain valve with hand lever -max. capacity 75 liter *