Used Wide belt sanders 1100-1199mm working width for sale (89)

Condition: excellent (used), Year of construction: 1994, Wide belt sander Compakt 1K/1030 year of construction 1994 Dqm00H 9 kw, sanding width 1000 mm Feed belt in good condition (was always covered) Combined unit

Condition: excellent (used), Year of construction: 2016, Working width 1100mm Belt Changing side: Left Workpiece Thickness: 3-160mm 1 contact roller head Manual head locking Profiled Steel Contact Roller with grit compensation and automatic calibration for positioning Cutting speed 18m/s 1 combined sanding head Manual head locking Profiled, rubberised contact roller with grit compensation and automatic calibration for positioning Controlled, pneumatically supported sanding pad for fine sanding Cutting speed 12m/s ACP pneumatically supported air cushion sanding pad Workpiece identification using pressure roller Adjustable sanding pressure using pressure regulator Start-stop active by workpiece front edge and rear edge Feed table adjustable by 4 trapezoidal thread spindles Bsglr2Zqmfq Abrasive belt drive with non-wear electrical braking Pneumatic tensioning of abrasive belt with integrated abrasive belt adjustment for compensating inaccuracies of the abrasive belt 7” Touch Screen with freely programable memory slots Eco Mode Belt Feed with step-less frequency-controlled feed speed 2.5-13m/min Automatic conveyor belt control 400V 50Hz Total Connected Load Approx. 28kw Overall Size: 1515 X 1725 X 1955mm Weight: 1800kg CE

Condition: used, Year of construction: 2000, Sanding width: 1.100 mm Workpiece thickness min: 3 mm Passage height max: 150 mm Protection against workpiece over-thickness: Yes Sanding aggregates total: 1 Sanding rollers: 1 Combination unit: 1 Sanding pads total: 1 Segmental pressure pad: electronic HEESEMANN Segmental pressure pad CSD: Yes Cleaning brush: Yes Constant passline height: Yes Main motor power: 15 kW Sanding belt length: 1.900 mm Belt speed max: 18 m/s Adjustable sanding belt speed: continuously variable Feedrate max: 10 m/min Dqnb7N Jump-in control: electromagnetic Configuration of aggregates: c-u Side of belt change: Left Jump-in control: Yes Control: Touchscreen Conformity marking: CE mark Total connection: 17 kW Weight: 2.000 kg Space requirement Length: 1,3 m Space requirement Width: 1,9 m Space requirement Height: 1,9 m

Condition: excellent (used), PART NUMBER 6145 TECHNICAL DATA - max width of workpiece 1100mm - max height of workpiece 140mm 3 units: 1) corrugated rubber roller for calibrating 15kW 2) corrugated rubber roller for calibrating 11kW 3) corrugated rubber roller for calibrating 11kW from above: - slip metal roller - skidding rubber roller - aggregate - 2 rubber rollers, slipping - aggregate - 2 rubber skidding rollers - aggregate - rubber skidding roller bottom: - feeding table 3600x1000mm - feed speed adjustable on inverter 0,25kW - pulling belt - 3 rubber rollers, sliding, outfeed - pneumatic belt oscillation on photocells - belt blowing off - electric lifting of the table - lifting motor 0.75kW - smooth regulation of the feed speed - feed motor 2,2kW 2W0Wxy - with vacum pump - pump motor 4kW - diameter of the exhaust stub 110mm, 80mm - working pressure 6-8bar - diameter of the suction nozzle 3×150, 3x200mm - overall dimensions of the machine length/width/height 3400x2300x2800mm - feeder dimension L/W/H 3000x1300x900mm - pump dimension L/W/H 600x950x940mm - weight about 5000kg Net price: 39900 PLN Net price: 9080 EUR depending on the price of 4,39 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 1995, Number of units: 2 # max. working width : 1100 mm Cqlgisxyka min./max. working height : 3 / 160 mm Sanding belt dimensions 1120 x 1900 mm Feed speed 5 & 10 m/min Motor power transport carpet 1.0 kW, 400 V, 50 Hz Motor power sanding units 1 x 11 kW, 400 V, 50 Hz 1st belt : calibrating roller, rubber 90 Sh, roller diameter 150 mm 2nd belt : electronic sanding pad with individual links 45 mm segment width Workpiece cleaning brush at the outlet Pneumatic sanding belt oscillation Electro-motorized table height adjustment with digital display Suction diameter 2 x 150 & 1 x 120 mm CE Approx. dimensions: L x W x H = 2000 x 1600 x 1900 mm Weight approx. 1350 kg both sanding shoes NEW occupied Incl. second, rigid sanding pad insert for solid wood and frame sanding Incl. many sanding belts Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Functionality: fully functional, Wide belt sander CB 2NRKRT 1100 Working width 1100mm Working height 150mm Number of aggregates 2 Rubber calibration unit Combination aggregate with a gourd Feed speed adjustable with a variator Electric adjustment of the table up/down Cof9Svgic3 Electronic indicator of the thickness of the sanded piece Material thickness gauge Optical oscillation Main motor 9kw Extraction nozzle 2x150mm Overall dimensions of the machine 1750x1630x2110mm

Condition: used, Bütfering AWS 1100-E heavy-duty wide belt calibrating and fine sanding machine comb. contact rollers - electr. sanding pad unit with structuring brush unit and vacuum Additional roller table in infeed and outfeed Working width 1100 mm motor power 15 kW year of construction 1993 Cm8Xhkq8Nk machine is FUNCTIONAL from location net € 7.000,00

Condition: good (used), Code: 0374 Brand: VIET - ITALY Model: PL 84/2 Automatic 2-belt wibe belt sander for wood, furniture, custom furniture, panels, wood window frames, composite materials and various Technical data: Working width mm 1100 Working height mm 4/160 Min piece length mm 250 Composition: 1° Group Calibrating Roller diameter mm 300 - Motor power Kw 11 - Belt size mm 2620 x 1150 - Belt cleaning blowers 2° Group Sanding Roller diameter mm 300 with 2 speeds - Motor power Kw 7,5/11 - Belt size mm 2620 x 1150 - Belt cleaning blowers Variable speed belt feed mt/min 3,2 / 20,5 Vacuum table - Motor power Kw 4 Automatic table positioner Infeed and outfeed roller conveyors Gpay28 N° 2 suction mouths diameter mm 200 Compressed air atm 6 Overall dimensions mm 1750 x 2400 x 2350 h Weight kg 2350

Condition: used, Wide belt sander VIET Target 211 -used- Rubberized contact roller, pneumatic activation of the contact roller, Digital display for sanding height, automatic thickness adjustment, sanding belt oscillation ----- Technical data ----- Working width: 1,100 mm, Number of belts: 2 pieces, Sanding belt size: 2,200x1,130 mm, max. workpiece thickness: 160 mm, min. Workpiece thickness: 4 mm, Bsmdkhvgs0U Suction nozzle Ø: 2 x 140 mm, Dimensions (LxWxH): 1,950x2,100x2,400 mm, Weight: 1,600 kg

Condition: used, Year of construction: 2007, machine/vehicle number: 07096414, Schleifen oben und Schleifen unten Schleifbreite: 900 mm Schleifhöhe: 150 mm Schleifbandabmessungen: 910 x 1900 mm Schleifbandmotoren: Kontaktwalze: 18,5 kW Schleifkissen: 11 kW Cpbl8Uxry8 Bürstenmotor: 0,55 kW Höhenverstellungsmotor: 0,25 kW Vorschubmotor: 1,5 kW stufenlos einstellbare Vorschubgeschw.: 5-25 m/min *weitere Technik und Layout auf Anfrage* Lagerort: Kunde

Condition: excellent (used), Year of construction: 2018, Wide belt sander for calibration and fine sanding top sanding Belt infeed left Sanding belt dimensions 1120 x 2620 mm working height approx. 3 - 160 mm Feed speed 3.7 - 16 m/min, variable Feed motor 1.1 kW, 400 V, 50 Hz Pmin 6 bar Suction connections 3 x 160 & 4 x 70 mm Dimensions approx. L x W x H = 1900 x 1650 x 2300 mm Weight approx. 1800 kg 1st unit Steel sanding drum Motor power 18.5 kW, 400 V, 50 Hz Pneumatic sanding belt cleaning 2nd unit Combination unit, time-controlled air sanding pad + sanding drum DM 180 mm, rubber 80 SH Motor power 18.5 kW, 400 V, 50 Hz Pneumatic sanding belt cleaning 3rd unit Cleaning brush at the outlet Motorized workpiece thickness adjustment with digital display & joystick control Vacuum transport carpet + blower Carpet centering device 2 x ammeter CE Transport carpet NEW Dqnp8Z Many sanding belts Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: ready for operation (used), Year of construction: 1990, Ott Alpha wide belt sander working width: 1100 mm min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Bsncn0Lb7Yw Motor power sanding unit: 11 kW Thickness adjustment: 0.55 kW Feed carpet: 1.3/1.8 kW Operating pressure: 6 bar Air requirement: 10 l/min. Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm Weight approx. 2400 kg, Contact roller D=150 mm Hardness 90° Shore - Air sanding pad with automatic insertion and removal Rigid sanding pad for solid wood frame sanding Automatic centering of the feed carpet cleaning brush electronic - low-wear disk brake system for immediate stop of the sanding belt drive with pressure monitor Motorized thickness adjustment with digital display Workpiece thickness limiter at the infeed Semi-automatic workpiece thickness adjustment 4-fold grit thickness adjustment for contact roller Condition checked for function Year of construction 1990

Condition: not inspected (used), Year of construction: 1991, Functionality: unexamined, total width: 2,000 mm, total height: 2,400 mm, total length: 5,000 mm, working width: 1,150 mm, overall weight: 5,000 kg, power: 105 kW (142.76 HP), motor voltage: 380 V, Equipment: double-sided, Double sided belt sander Double wide belt sander Two-sided belt sander Processing width 1150 mm Total power 105 kW 380 Volt Equipment : brush bottom, brush top, 3x sanding unit top , 3x sanding unit bottom A crane is needed to load the machine total electrical load 105 kW grinding band dimension 1150 x 2620 mm dimensions (l x w x h) approx. 5000x2000x2400 mm weight approx. 5000 kg year of construction 1991 Fzjideo Machine quality unchecked, no guarantee of functioning

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sander with 1100 mm sanding width 1. aggregate rubberized roller 2. aggregate electron. 3 stage motor with left and right rotation selectable 3. aggregate electron. Electronic link shoe with infinitely variable belt speed 4. blowing duct 2 stage feed Vacuum carpet Cxzakcg

Condition: new, Wide belt sander CASADEI LIBRA 10/95 TC Promotional model from stock -Working table height adjustment with electronic display of the working height -Oscillation of the sanding belts with electronic system Rb7Etp9 -Rubber-coated grooved pressure roller at infeed 1° Position with backstop -Grooved calibration steel roller -Switching the sanding pad on and off from the control panel -Switching the roller on and off from the control panel -Fox 500 KTR electronic control unit -Table extension with 2 rollers in the infeed and outfeed -Automatic table positioning: automatic adjustment of the work table height automatically via microswitch without correction of the material removalDimensions and dimensions and weights: - Length (product) approx.: 1388 mm - Width/depth (product) approx.: 1545 mm - Height (product) approx.: 1668 mm Suction connection: - Suction nozzle diameter: 140 mm Electrical data: - Power feed motor: 0.33 / 0.55 kW - Drive motor output: 7.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Height adjustment motor power: 0.25 kW Sanding unit: - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Sanding width max.: 950 mm Feed unit: - Feed speed: 4.5 / 9 m/min Workpiece: - Workpiece height min.: 4 mm - Workpiece height max.: 170 mm Subject to prior sale. - new exhibition machine -

Condition: excellent (used), Catalog number 6349 TECHNICAL DATA - max workpiece width 250mm - max workpiece height 110mm 2 grinding units: top and bottom from above: - 2 sliding pressure rollers - sanding unit 2 metal rollers + viscera - sliding pressure roller - pulling rubber belt - VACUM from below: - pulling belt - 2 slipping rollers, metal - grinding unit 2 metal rollers + viscera - 3 pull-out rollers, metal - paper cleaning at the upper and lower aggregate Gx2Quw - electrically adjustable grinding height - oscillation of grinding belts - infinitely variable adjustment of the feed speed on the inverter - main motors 2×5,5kW - air demand 8bar - diameter of exhaust stubs 4x100mm - overall dimensions L/W/H 1400x1200x1850/2250mm - weight 1490kg - for short elements (VACUM belts) - made in Germany - DTR documentation - unpainted - grinder used, very good condition Net price: 26900 PLN Net price: 6114 depending on the price, 4.4 euros (Prices may vary in case of large fluctuations)

Condition: new, Year of construction: 2024, Functionality: fully functional, - Print resolution:1200 x 1200 dpi - Print speed:50 mm/s - 200 mm/s - Print area (width:)19 mm- 105.9 mm Dqkhjx - Print area (length):6 mm- 397 mm - Thickness:145 ~ 255 μm - Roll size:200 mm outer diameter, - 76 mm core - Ink: water-based color inks with extra wide color gamut for highest print quality - Ink cartridges:individual CMYK color cartridges, 240 ml each (230 ml usable) - Control: Windows driver - Connection: High-speed USB 2.0; Gigabit Ethernet; External control via RS-232 interface & protocol - Borderless print width of max. 104 mm - High durability in almost all areas of application - Can be integrated into dispensing systems for automatic labeling - Material width up to 115 mm

Condition: ready for operation (used), Year of construction: 1993, Ott Alpha wide belt sander working width: 1100 mm min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power sanding unit: 11 kW Thickness adjustment: 0.55 kW Feed carpet: 1.3/1.8 kW Operating pressure: 6 bar Air requirement: 10 l/min. Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm Weight approx. 2400 kg, Contact roller D=150 mm Hardness 90° Shore - Air sanding pad with automatic insertion and removal Rigid sanding pad for solid wood frame sanding Automatic centering of the feed carpet Bsllw79Kpng cleaning brush electronic - low-wear disk brake system for immediate stop of the sanding belt drive with pressure monitor Motorized thickness adjustment with digital display Workpiece thickness limiter at the infeed Semi-automatic workpiece thickness adjustment 4-fold grit thickness compensation for contact roller Condition checked for function Year of construction 1993

Condition: good (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: AE/012563, infeed width: 1,100 mm, WIDE BELT SANDER - SCM SANDYA 30 RT110 Brand: SCM Type: SANDIA 30 RT110 Serial no.: AE/012563 Year: 1995 Features of the wide-belt sander 2 belts, working width : 1100 mm. 1st belt : - Metal roller diam. 220 mm. - Three-phase 380 v. motor, power: 15 KW (20 hp) - For calibration and first panel sanding phase. 2nd belt : - Pneumatic pressure sanding pad. Bik9Abir - Three-phase 380 v. motor, power: 11 KW (15 hp) - for fine to very fine finish sanding. - Automatic adjustment to panel thickness. - Support with 2 free rollers at infeed and 2 at outfeed. - Control pedal - Mushroom-type stop button - Unit in very good condition - Drive belt also in very good condition - CE standards - Overall dimensions: 2050 x 1850 x h. 2120 mm - Weight: 2740 kg Lot offered without overhaul, without warranty Prices ex-store. Transport and services on request.

Condition: used, Calibrating sander brand SCM model SANDYA 1100 RT, roller and pad, width mm. 900, used Engine power: Bmfhxrmhws HP 20 Roller HP 15 buffer HP Carpet 1

Condition: new, HOUFEK SPB Buldog 5 C wide belt sander Working width: 910 mm, -exhibition machine- Rubberized contact roller, sanding belt oscillation, elect. Measurement of table position with digital display, Ammeter for measuring the current of the sanding unit motor, Sanding drum lifting from the front control panel - pneum, automatic star / delta start of the motor, motorized table lift, pneum. Disc brake of the main motor, mechanical limitation of workpiece removal, automatic feed belt centering ----- Technical data ----- Working width: 910 mm, Working rollers Ø: 160 mm, Sanding belt size: 930 x 2,200 mm, Sanding belt speed: 18 m/sec, Pgjzopl Feed speed: 3 - 15 m/min, max. workpiece thickness: 3 - 160 mm, suction nozzle Ø: 150 mm, Motor power 400 V: 11.0 kW, Dimensions (LxWxH): 2,410 x 1,540 x 2,160 mm - new exhibition machine -

Condition: used, Year of construction: 2018, Sanding width: 1.100 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Uqhky2Fzcv Workpiece length min: 370 mm Sanding aggregates total: 2 Sanding rollers: 2 Steel roller: Yes Hardness grade of roller in ° shore: 47 Combination unit: 1 Sanding pads total: 1 Segmental pressure pad: elastic pad SCM TES Elastic sanding pad: Yes Segment width: 50 mm Sensing of workpiece thickness: mechanical Main motor power: 15 kW Sanding belt length: 1.900 mm Feedrate max: 9 m/min Configuration of aggregates: r-c Side of belt change: Left Jump-in control: Yes Control: SCM LOGIC 50 K Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 11,6 kW Weight: 1.160 kg Space requirement Length: 1,82 m Space requirement Width: 1,65 m Space requirement Height: 1,95 m

Condition: used, OTT Megatronic 11 + lacquer Wide belt calibrating and fine sanding machine 1. sanding unit calibration roller unit 2nd sanding unit electronically controlled link sanding pad unit Betygpwz Working width 1100 mm Feed speed 5 + 10 m/min Rigid sanding pad for solid and frame sanding Lacquer equipment: Vacuum carpet Vacuum generator 3 kW 2nd belt speed Belt radiation Total connection approx. 24.5 kW CE version Machine in EXTREMELY CLEAN CONDITION from carpentry dissolution - craft business ex location

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Bkamjge8Jw0 Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Including: - HOUFEK segmenter sanding pad electronically controlled, for width 1,350 mm Sanding pad PS 50 E Includes NC control with 10.1" touchscreen Bsmc0Naxyfk Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -