English
German English Dutch Dutch
unbekannt Aufnahme 32 mm unbekannt Aufnahme 32 mm unbekannt Aufnahme 32 mm unbekannt Aufnahme 32 mm unbekannt Aufnahme 32 mm
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: cross-cut, 2 pieces -Type: 1 piece HSS 150x16x32, 1 piece 150x18 -Socket: Ø 32 mm -Price: complete -Weight: 2.4 kg Bmdcqsx27n
PFAUTER Fraeskopf - Innenverzahnung PFAUTER Fraeskopf - Innenverzahnung PFAUTER Fraeskopf - Innenverzahnung
more images
3
Call
Tönisvorst, Germany Germany
(dealership location)
7632 km
1970
used
power capacity 0 kW tool adaptor 0 total power requirement 0 kW Benjwgtq2o weight of the machine ca. t dimensions of the machine ca. m
WALDRICH WFD 100 WALDRICH WFD 100 WALDRICH WFD 100
more images
3
Call
Düsseldorf, Germany Germany
(dealership location)
7660 km
1970
used
throat 450 mm Ptxoki tool adaptor 60 ISO power requirement 100 kW spindle distance 720 mm speeds 12 - 450 U/min total power requirement kW weight of the machine ca. 2 t dimensions of the machine ca. m
EMENA V-2/40 E
more images
1
Call
Witten, Germany Germany
(dealership location)
7677 km
2021
new
throat:276 mm G7p7bkp tool adaptor:40 ISO power requirement:7,5 kW
KÖPFER Schneckenfraeskopf KÖPFER Schneckenfraeskopf KÖPFER Schneckenfraeskopf KÖPFER Schneckenfraeskopf KÖPFER Schneckenfraeskopf
more images
5
Call
Malsch, Germany Germany
(dealership location)
7892 km
1980
used
inner taper of milling spindel ja collet diameter ja turning speed range 800 U/min Stdekw drive motor kW distance spindle - column mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m
EMENA VXZ-3 EMENA VXZ-3
more images
2
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
turning speed range 3000 U/min drive motor 30 kW tool adaptor ISO 50 Torque 1500 Nm Bhisxjly Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG
Widia THM  FWD 0 50 Widia THM  FWD 0 50 Widia THM  FWD 0 50 Widia THM  FWD 0 50 Widia THM  FWD 0 50
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Shell end mills, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: Widia, milling cutter type THM FWD 0 50 -Inside: Ø 11/17 mm Bmdctisorw -Dimensions: Ø 50 x 50 mm -Weight: 0.5 kg
BENZ Universal Fraeskopf BENZ Universal Fraeskopf BENZ Universal Fraeskopf BENZ Universal Fraeskopf BENZ Universal Fraeskopf BENZ Universal Fraeskopf
more images
6
Call
Ennepetal, Germany Germany
(dealership location)
7683 km
used
inner taper of milling spindel SK 40 Pgmkp collet diameter / turning speed range 2000 U/min
more images
Call
Dortmund Germany
7679 km
excellent (used)
Universal milling head system "HURON" with hydraulic tool clamping Ehgk9h7 ISO 50 Swivelling over 2 levels Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel
EMENA V-2/40 N
more images
1
Call
Witten, Germany Germany
(dealership location)
7677 km
2021
new
throat:276 mm tool adaptor:40 ISO power requirement:7,5 kW Pl9e9tiz
Gleason Fraeskopf P 100 bis P 260
more images
1
Call
Malsch, Germany Germany
(dealership location)
7892 km
used
inner taper of milling spindel Sk40 collet diameter nein turning speed range 300 bis 3000 U/min drive motor 15 kW weight of the machine ca. 0,8 t Benxfoi7uv
EMENA VED mit Pinolen verstellung EMENA VED mit Pinolen verstellung EMENA VED mit Pinolen verstellung
more images
3
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
turning speed range 1800 U/min tool adaptor ISO 40 - 50 spindle taper DIN 2080 / M16 Bhlsdbuc drive motor 7,5 PS quill stroke 65 - 75 mm quill stroke 65 mm
Sandvik Coromant 331-31-250060-235 Sandvik Coromant 331-31-250060-235 Sandvik Coromant 331-31-250060-235 Sandvik Coromant 331-31-250060-235 Sandvik Coromant 331-31-250060-235
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 250 x 60 mm, cross-cut Odc3y7vt -Turning plates: exchangeable -Socket: Ø 32 mm -Dimensions: Ø 250 x 135 mm -Weight: 3.9 kg
WMW ApFU WMW ApFU WMW ApFU WMW ApFU WMW ApFU WMW ApFU
more images
6
Call
Leipzig, Germany Germany
(dealership location)
7963 km
used
Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Spindle taper ISO 50 Kezwewz2 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head
more images
Call
Dortmund Germany
7679 km
good (used)
Universal milling head system "HURON" with hydraulic tool clamping ISO 50 spindle mounting Drive power 30 KW Pivotable over 2 levels Cx8xgntu Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel
WALDRICH COBURG 17 - 10 FP WALDRICH COBURG 17 - 10 FP WALDRICH COBURG 17 - 10 FP WALDRICH COBURG 17 - 10 FP
more images
4
Call
Niederhelfenschwil, Switzerland Switzerland
(dealership location)
8036 km
used
CONTROLS .. conventional 2 x Milling heads from portal Milling machine Waldrich Coburg. Nulo9 Owner worked only with aluminium in automotive industry. Heads 17, 23 - B Axe
WAKO WPK WAKO WPK
more images
2
Call
Bergstraße, Deutschland Germany
7863 km
excellent (used)
Nr. 4371: 1 gebr. Universal Planschlitten Fräskopf / Radien - Fräskopf Fabr. WAKO Walter Kolb KG Typ WPK Izeiomiko Aufnahme SK 40 / S20 - Adapter
EMENA VXZ-2 EMENA VXZ-2
more images
2
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
turning speed range 3000 U/min drive motor 30 kW Bhfjnvg7xp tool adaptor ISO 40 Torque 1500 Nm Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG
unbekannt Aufnahme: 22 mm unbekannt Aufnahme: 22 mm unbekannt Aufnahme: 22 mm unbekannt Aufnahme: 22 mm unbekannt Aufnahme: 22 mm
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Gear cutters, module cutters, tooth form cutters, module milling heads, shell end mills, shell cutters, milling cutters, hobs, spline shaft hobs -Modular milling cutters: 5 pieces hobs -Socket: Ø 22 mm -Various types: see photos, more pictures can be sent -Price: complete Bq23qvttfr -Dimensions: 150/120/H60 mm -Total Weight: 2.4 kg
DROOP & REIN FS 130 gKE DROOP & REIN FS 130 gKE DROOP & REIN FS 130 gKE DROOP & REIN FS 130 gKE DROOP & REIN FS 130 gKE DROOP & REIN FS 130 gKE
more images
6
Call
Gießen Germany
7805 km
1966
good (used)
used, from dismantling of a DROOP & REIN FS 130 gKE CNC vertical milling machine year 1966 1x milling head 22 kW with SK50 tool holder milling spindle diameter: 130 mm tool holder: SK 50 diameter of the milling spindle shaft: 210 mm axial displacement of the milling spindle: 200 mm Milling spindle speed: 18 pieces / 31,5 - 1600 rpm motor power: 22 kW / 1455 rpm The machine has not been run very often and was only disassembled due to lack of space. Price understands itself plus VAT. free loaded c...
more images
Call
Čadramska vas 30, 2319 Poljčane, Slowenien Slovenia
8499 km
2001
good (used)
Universal diagonal automatic milling head, 2,5 degree division in A and C axes, 3000 rpm, ISO 50 69871, grease lubricated, ready for use. Bz2mmwar9g
PIBOMUL TI FX375-06-5300B PIBOMUL TI FX375-06-5300B PIBOMUL TI FX375-06-5300B PIBOMUL TI FX375-06-5300B PIBOMUL TI FX375-06-5300B
more images
5
Call
Daya Vieja Spain
7957 km
2017
new
1 spindle output ISO50 DIN69871A Integrated clamping mechanism for automatic tool change .- Clamping by mechanical spring .- Unclamping by hydraulic piston ( machine draw bar) Speed ratio: i= 1 to 6 Max. Speed: 5000 rpm Max. Speed continuous: 3200 rpm Power: 30kW Max. Torque: 830Nm Internal Lubrification: Oil Mist Jxe7z3 Driven by machine spindle Weight 385 kg.
Universal milling head for console milling machine WMW Heckert, type FU 315, FW 315, tool holder swivels in X-, Y- and Z- axis, tool holder SK 40, manual clamping, incl. drive shaft SK 50 / multi wedge Bw702l3r8r weight approx. 100 kg
EMENA V 0-4 erhoeht EMENA V 0-4 erhoeht
more images
2
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
tool adaptor ISO 40 - 50 turning speed range 1800 - 4000 U/min drive motor 5 - 30 kW Benmjb0m3e
Coromant F2038 63L Coromant F2038 63L Coromant F2038 63L
more images
3
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Shell end mills, shell cutters, milling cutters, indexable inserts -Outer diameter: mm -Height: mm -Adjustment: SK50 -Teeth: 27 -Dimensions: 95/95/H290 mm -Weight: 6 kg Qwv8zdydq
EMENA V 0 EMENA V 0 EMENA V 0 EMENA V 0
more images
4
Call
Dortmund Germany
7679 km
2020
new
1 brand-new universal vertical milling head "HURON" system make: EMENA model: V 0, ISO 40, normal Pj7ryjv7 Technical data: Mounting ISO 40, design: normal, with adapter plate, for subsequent mounting on conventional, NC or CNC milling machines or boring mills of any kind, system "HURON", throat 270 mm, designed drive power 5 HP, max. speed 1800 rpm, weight approx. 32 kg, ... Option: - Mounting flange head side finished, machine side unmachined 545,00 € net. - Increased version 945,00 € net Deliv...
Angle drilling and milling head Manufacturer: heimatec type: 8 030 56 07 Mounting: BMT 50 Design: Weldon Ø18mm Free shipping within Germany; International shipping on request Scope of delivery see photos Item no.: 001214 Boumcdj8sy Immediately available ***Subject to alterations and errors in the technical data and information as well as prior sale!
Z253 Adapter plate for vertical milling head Burjjjortf Bolt circle diameter 320mm has been lying outside for a long time and is rusty
PRECISE PVSF 73 PRECISE PVSF 73 PRECISE PVSF 73 PRECISE PVSF 73 PRECISE PVSF 73
more images
5
Call
Bergstraße, Deutschland Germany
7863 km
good (used)
Nr. 3282: Y2a0q2 1 gebr. Elektronischer Frequenzumformer fuer Schleif- und Fraesspindeln Fabr. PRECISE Typ PVSF 73 Ausgang 10.000 - 40.000 min-1 FCA D-64625 Bensheim
EMENA V 0 normal EMENA V 0 normal
more images
2
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
tool adaptor ISO 40 Torque 200 Nm Benmjllsqf turning speed range 1800 U/min drive motor 3,7 kW
WMW PWS Aufnahme 27/32/40 mm WMW PWS Aufnahme 27/32/40 mm WMW PWS Aufnahme 27/32/40 mm WMW PWS Aufnahme 27/32/40 mm WMW PWS Aufnahme 27/32/40 mm
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Gear cutters, module cutters, tooth form cutters, module milling heads, shell end mills, shell cutters, milling cutters, hobs, spline shaft hobs Vmpmca7x -Manufacturer: WMW PWS, 17 pieces hobs -Recording: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400 / H150 mm -Total weight: 52.5 kg
EMENA V 3 / 90° EMENA V 3 / 90° EMENA V 3 / 90° EMENA V 3 / 90°
more images
4
Call
Dortmund Germany
7679 km
2017
new
1 brand-new 90° vertical milling head for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, L-R-swivelling 360 degrees, manual tool tightening Make: EMENA Model: V 3 - 90° Year of manufacture: 2017 Technical data: spindle mounting ISO 50 designed drive power 22 kW max. speed 3000 rpm Wmqvosid2 throat 350 mm spigot mounting Ø 180 mm outer diameter of mounting surface Ø 306 mm head height 441 mm head dimensions D x H 450 x 441 mm Weight 115 kg Accessories / Spec...
Pfauter Maschinen Pfauter Maschinen
more images
2
Call
Bruchsal-Büchenau Germany
7891 km
2019
good condition (used)
Ein Konvolut Abwälzfräser für Pfauter-Maschinen Cis7kt0s
Wohlhaupter UPA 4 Wohlhaupter UPA 4 Wohlhaupter UPA 4 Wohlhaupter UPA 4
more images
4
Call
Kollumerzwaag Netherlands
7493 km
good condition (used)
Boring head, Model UPA 4 SC 40 Bv3bqgchoe
Rambaudi Rammatic Rambaudi Rammatic Rambaudi Rammatic Rambaudi Rammatic Rambaudi Rammatic Rambaudi Rammatic Rambaudi Rammatic
more images
7
Call
Gorxheimertal, Germany Germany
(dealership location)
7876 km
1996
ready for operation (used)
Milling Head SK 50 - 22/33 kW - 3600 min-1 from RAMBAUDI RAMMATIC 1201 Weight ~ 800 kg Ncplf
EMENA V 1 normal EMENA V 1 normal
more images
2
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
turning speed range 1800 U/min drive motor 5,5 kW tool adaptor ISO 40 Torque 290 Nm Benmfy7o9z
Fette Aufnahme: 27 mm Fette Aufnahme: 27 mm Fette Aufnahme: 27 mm Fette Aufnahme: 27 mm Fette Aufnahme: 27 mm
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Gear cutters, module cutters, tooth form cutters, module milling heads, shell end mills, shell cutters, milling cutters, hobs, spline shaft hobs -Manufacturer: Fette, 3 pieces hobs -Socket: Ø 27 mm -Various types: see photos -Price: complete -Dimensions: 200/70/H55 mm Bq3xhm90pf -Total weight: 3.1 kg
SEMA SE 100 SEMA SE 100 SEMA SE 100 SEMA SE 100 SEMA SE 100 SEMA SE 100
more images
6
Call
Dortmund Germany
7679 km
2005
used
Crankshaft milling device SEMA SE 100 for mounting e.g. on a lathe for milling crankshafts Spindle mount ISO 50 Speed range, infinitely variable 25 - 210 rpm Spindle is designed up to 3000 rpm Drive power, currently 15 kW The milling spindle is designed up to 25 kW bearing diameter 110 mm Accessories / Special features: - Infinitely variable speed adjustment, frequency converter make LENZE, designed up to 30 kW - Right / left rotation - Spindle bearings lubricated for life - Stable construction ...
Union Union Union Union Union
more images
5
Call
Ellwangen Germany
7999 km
excellent (used)
Universal vertical milling head This milling head was used on a Union TC130 bench boring machine and can be adapted to many other machines. About us: D27fj09q3 MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service ...
Deckel Deckel Deckel
more images
3
Call
Heilsbronn, Germany Germany
(dealership location)
8010 km
excellent (used)
Drill milling head Shooting ISO 40 Bia8ylf8kf
Eppinger 7.073.118 Eppinger 7.073.118 Eppinger 7.073.118 Eppinger 7.073.118 Eppinger 7.073.118
more images
5
Call
Coswig Germany
8044 km
good condition (used)
Here you have the possibility to buy a straight & as good as new drilling-milling head. Technical data: Manufacturer: Eppinger Item number: 7.073.118 DOOSAN article number: R78683A Gear ratio: 1:1 Input speed: maximum 6,000 1/min Output speed: maximum 6,000 1/min Output torque: maximum 40 Nm Coolant supply: external Alignment: straight RRP manufacturer: 903,00 € plus VAT. Negotiable basis: 650,00 € plus VAT. Shipping within Germany including packaging 35,00 € net. Shipping outside Germany on req...
EMENA V 4 normal EMENA V 4 normal
more images
2
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
turning speed range 3000 U/min drive motor 22 kW tool adaptor ISO 50 Torque 1000 Nm Bhlir3ab
Fette JAL Aufnahme 16/22/27 mm Fette JAL Aufnahme 16/22/27 mm Fette JAL Aufnahme 16/22/27 mm Fette JAL Aufnahme 16/22/27 mm Fette JAL Aufnahme 16/22/27 mm
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Gear cutters, module cutters, tooth form cutters, module milling heads, shell end mills, shell cutters, milling cutters, hobs, spline shaft hobs -Manufacturer: Fette/JAL, 23 pieces of hobs -Recording: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Various types: see photos, more pictures can be sent -Price: complete Bq3xijtlli -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg
EMENA V 2 - ISO 40 erhöht
more images
1
Call
Dortmund Germany
7679 km
good condition (used)
1 unused universal vertical milling head in elevated version for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, system "HURON" can be swivelled over 2 planes, any angle adjustable spindle mounting ISO / SK 40 projection approx. 360 mm D8ot3uy designed drive power 10 PS max. speed 1800 rpm Pkgp2so2 weight approx. 82 kg Accessories / special features: - With adapter plate in raised design with additional helical gear wheel - Manual tool clamping - The main sp...
Wotan
more images
1
Lenggries Germany
8169 km
ready for operation (used)
Angle head length approx. 600 mm MK5 with thread Belvnm2wib with appropriate Collet Chuck from Wotanbohrwerk
Cytec M21C Cytec M21C Cytec M21C Cytec M21C Cytec M21C Cytec M21C Cytec M21C Cytec M21C Cytec M21C Cytec M21C
more images
10
Call
Tschechien Czech Republic
8243 km
2015
excellent (used)
Simultaneous fork milling head Continuous power (S1/100% ED): 21 kW Power (S6/40% ED): 27 kW Continuous torque (S1/100% ED): 100 Nm Torque (S6/40% ED): 130 Nm Speed range: 10 - 18.000 rpm. Characteristic speed: 2.000 rpm. Inner diameter of front spindle bearing: 70 mm Swivel range B-axis (spindle): ±100°. Tool holder: HSK63 form A for internal coolant supply External coolant supply: Via nozzles The fork-type milling head is designed for pre-finishing and finishing operations and is driven by tor...
Eppinger 7.073.330 Eppinger 7.073.330 Eppinger 7.073.330 Eppinger 7.073.330 Eppinger 7.073.330 Eppinger 7.073.330 Eppinger 7.073.330 Eppinger 7.073.330
more images
8
Call
Coswig Germany
8044 km
as good as new (ex-display)
Technical data: Manufacturer: Eppinger Item number: 7.073.330 DOOSAN article number: R78935 Gear ratio: 1:1 Input speed: maximum 3500 1/min Output speed: maximum 3500 1/min Output torque: maximum 210 Nm Coolant supply: external Alignment: angled RRP manufacturer: 3.187,00 € plus VAT. Negotiable basis: 1.900,00 € plus legal value added tax. Cmhezyoi Suitable for DOOSAN Puma VT1100 M Shipping within Germany including packaging 35,00 € net. Shipping outside Germany on request. Requests for other or...
EMENA VAR 5 mit hydr. Klemmung EMENA VAR 5 mit hydr. Klemmung EMENA VAR 5 mit hydr. Klemmung
more images
3
Call
Bottrop-Grafenwald, Germany Germany
(dealership location)
7642 km
2021
new
turning speed range 3000 U/min drive motor max. 25,7 kW tool adaptor ISO 50 distance spindle - column 417 mm Torque 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. Benmgcout0 High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of pe...
WMW PWS Aufnahme 40/50 mm WMW PWS Aufnahme 40/50 mm WMW PWS Aufnahme 40/50 mm WMW PWS Aufnahme 40/50 mm WMW PWS Aufnahme 40/50 mm
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Gear milling cutters, module milling cutters, tooth form milling cutters, module milling heads, shell end milling cutters, cylindrical milling cutters, milling cutters, hobs, splined shaft hobs, sprocket hobs -Manufacturer: WMW PWS, 2 pieces sprocket hobs -Recording: Ø40 mm 1 piece, Ø 50 mm 1 piece 2sqfbu -Various types: see photos -Price: complete -Total dimensions: 280/170 / H175 mm -Total weight: 22.2 kg
ORADEA / EURO-MILL FUS 32 ORADEA / EURO-MILL FUS 32 ORADEA / EURO-MILL FUS 32
more images
3
Call
Dortmund Germany
7679 km
good condition (used)
1 unused universal vertical milling head suitable for one ORADEA / EURO-MILL FUS 32 7uy0sf7gb Type "MAHO", ISO 40 adapter, quill stroke 100 mm, designed drive power approx. 3-4 KW, max. speed 2000 rpm, ... Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel
 

Used Millingheads

Completely search Werktuigen and more than 200,000 used machines now.
FEEDBACK
Successful: Task carried out
Error: Task could not be carried out