Gear edge deburring machine

Präwema

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 40-200 mm total power requirement: 31,3 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,8 x 2,2 x 1,8 m Lrodpfjxc E Icex Aaxog

Condition: used, Manufacturer: PRÄWEMA, Model: 205HS2-2 / Synchrofine, Year of manufacture: 2008, Machine No.: 077238, Control system: Rexroth Indramat, Type: System 200 BTV20, including hand-held control terminal, Workpiece diameter: 95 mm, Maximum workpiece length: 59 mm, Maximum spindle speed: C-axis (workpiece): 6,000 rpm / 7,000 rpm, B-axis (tool): 2,000 rpm, Maximum feed rates Z/X: 60 m/min, Honing head part no.: 416101804-8, Year: 2008, Serial no.: 221, Machine bed made of granite, Manufacturer: Eckbert Reitz, Type: HFSL204HS2, Year: 2008, Workpiece automation, Surface quality inspection unit, Oil drip tray, Pump: Brinkmann, Type: TH160/350-001, Operating hours (as of 25/11/2018): 69,518 Lrsdpfx Asx Ahc Neaxjg +++ Note: This item is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 2001, operating hours: 55,784 h, functionality: fully functional, machine/vehicle number: 006 904, spindle speed (max.): 3,000 rpm, gear diameter: 200 mm, travel distance X-axis: 950 mm, travel distance Z-axis: 200 mm, TECHNICAL DETAILS Workpiece diameter: 40 - 200 mm Workpiece spindle speed: 0 - 3,000 rpm Workpiece spindle torque: 45 Nm Power: 11.5 kW Center height of workpiece spindle: 1,140 mm X-axis travel: 950 mm Z-axis travel: 200 mm Minimum feed increment: 0.001 mm Control: SINUMERIK 840 D, PLC type S7 Lredpfxew T Rzws Aaxjg Pneumatics Required system pressure: 5–10 bar Air consumption: 0.6 Nm³/h Lubrication Central lubrication tank capacity: 6 l Lubricant: DIN CGLP, ISO VG 68 Coolant Emulsion Coolant emulsion consumption: 900 l/h MACHINE DETAILS Total power requirement: 31.3 kW Machine weight: 4,000 kg Space requirements: 1.8 x 2.2 x 1.8 m Noise level: max. 76 dB Paint finish: RAL 7035 Operating hours: 55,784 h Operating voltage: 400 V, 50 Hz Rated power: 31.3 kW Rated current: 48 A Control voltage: 24 V DC Auxiliary voltage: 230 V, 50 Hz

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm Ljdpfew Iquyox Aaxjrg -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. Lodpfxjt Hwyls Aaxerg The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.