Used hay technology for sale (9)

Condition: used, Year of construction: 2009, Claas Liner 1650 Twin machine, ready for operation. Fodpfx Aozp Angjhdspn 6-wheel chassis. Price: 7,900.00 Euro net. Location: null

Condition: used, functionality: fully functional, Year of construction: 2021, overall weight: 4,850 kg, Equipment: front power take-off, Manufacturer: Krone Model: Swadro TC 1250 Year of purchase: 2023 Used, with signs of wear, good condition Important information: A functional video can be sent upon request. Technical data according to the manufacturer: Four-rotor center-delivery rake Working width: 9,800 - 12,500 mm Swath width approx. 1,400 - 2,200 mm* Transport width approx. 2,990 mm Transport height: approx. 3,990 mm Weight approx. 4,850 kg (base machine) Rotor diameter: Front: 3,300 mm, rear: 2,960 mm Eleven tine arms in front, 13 tine arms in the rear Max. PTO speed 540 rpm Power requirement approx. 59 kW (80 hp) Required hydraulic connections: 1 x single-acting, 1 x double-acting Standard equipment: Mounting Two-point mounting bracket (Cat II) incl. pivoting suspension via ball joint and roller Two-leg support Drive train Rotor gearbox with maintenance-free grease filling, completely hardened KRONE Dura-Max cam track KRONE Easy-Line drive concept (front rotor pair rotates approx. 25% faster than the rear) Rotors individually protected by overload clutch PTO shaft, wide-angle joint on one side, 1 3/8", Z=6 Fodjz Hvldjpfx Ahdepn Drive train with freewheel Rotors + rotor chassis Cardan rotor suspension incl. Krone Jet effect, mounting of the tine arms by means of maintenance-free ball bearings Four 10.5 mm trailing double tines per arm with a large coil diameter and "lift effect" Tines mounted to prevent loss around the tine arm Rotor height adjustment by hand crank incl. rotor height indicator Easy operation via hydraulic control unit, incl. follow-up control of the rotors Hydraulic relief of the front rotors, spring relief of the rear rotors Four-wheel rotor chassis incl. four trailing feeler wheels Rotor tires: 4 x 16x6.50-8 each Additional equipment: Warning signs and LED lighting Operation via pre-selection control box and tractor-side control valves additionally with: - Tires Vredestein Flotation 500/50 R 17 - Middle swath curtain (hydraulically pivoting) - Hydraulic single-rotor lift via pre-selection switch box (electric) (lifting of the front rotors) including paired lifting of the rotors + 1 single-acting hydraulic valve

Condition: used, Year of construction: 2020, Working width: 8.40-12.50 m Middle swath width: 1.40 - 2.40 m Transport width: 3.00 m Transport length: 9.95 m Transport height: 3.95 m 1 central swath Number of rotors: 4 Rotor diameter: 3.20 m Number of tine arms per rotor: 11 on the front rotor, 12 on the rear rotor / 4 double tines per tine arm Sealed, maintenance-free MASTERDRIVE GIII gearbox 3D pendulum suspension 4 pivoting wheels per rotor Price: EUR 38,500.00 net Fpjdpfxov H Rw Uj Ahdsn Location: Getränkemarkt-Platz

Condition: used, Year of construction: 2021, _____Fendt 4-rotor hay tedder, model 12545 Year of manufacture: 2021 Mechanical operation No Isobus Low operating hours Immediately ready for use Price: 29,000.00 Euro (net) 34,510.00 Euro (including 19% VAT) Fpsdpfx Ahszknxtedjn Location: null

Condition: used, Year of construction: 2026, Working width: 6.40 meters Width in working position: 6.75 meters Number of rotors: 6 Number of tine arms per rotor: 6 Transport width: 2.95 meters Transport height: 3.30 meters Turning at the field edge: by manually adjusting the angle of the wheels Grass deflectors above the tine revolutions Fixed spreading angle adjustment Rotor drive via DIGIDRIVE finger clutch made of forged, case-hardened steel PTO speed: 540 rpm Balloon tires 15x6.00-6 Fpedpfx Ahjzdmt Njdsn Outer rotors hydraulically folded up for transport Three-point linkage, Category 2 Swivel head trailing device Mechanical vibration damper 1 single-acting hydraulic cylinder Power requirement at the PTO: 22 kW/30 hp Weight: approx. 850 kg Location: 54595 Prüm

Condition: new, Year of construction: 2024, he shredder is designed for shredding straw or hay pressed in rolls. In certain cases, after obtaining the manufacturer’s permit or testing, it is possible to shred square or rectangular pressed bundles. Required fraction of the shredded product at the output is possible after selecting a sieve of a certain throughput from the range offered by the manufacturer. In case product fractions of a smaller size are needed, insert a finer sieve, and vice versa. Fpedpfetnfuzox Ahden Technical Data of Shredder Capacity: 500 – 1200 kg/h Shredding fraction: 10 – 35 mm Humidity of raw material:

Condition: new, Year of construction: 2026, _____Mounting category I+II Working width approx. 3.85 m Swath width approx. 0.70 - 1.55 m Transport width approx. (with tine bars removed) 1.68 m Transport length approx. 2.34 m Rotor diameter 2.96 Number of tine arms per rotor: 10 Number of double tines per arm: 4 Tire size for rotor chassis: 2x 16/6.50-8 Tandem axle Optional accessories Power requirement approx. kW/hp 20/27 Required hydraulic connections: - Height adjustment of rotor: mechanical PTO speed: 540 rpm PTO shaft Overload protection (star ratchet) PTO shaft profile: 1 3/8", 6-piece Warning signs: optional accessory Fjdpfjzgqq Rsx Ahdepn Lighting: optional accessory Weight approx. 520 kg Special equipment: - Set of warning signs with LED lighting - 1 set of tandem axles with 16/6.50-8 wheels Internal number: 14393 Net price: 6,900.00 EUR Gross price: 8,211.00 EUR Location: null

Condition: new, Year of construction: 2026, _____Category I+II mounting Working width approx. 6.60 m Transport width approx. 2.90 m Height in transport position approx. 3.30 m Number of rotors 6 Number of tines per rotor 6 Fodozgqq Dspfx Ahdepn Tine loss protection standard Tire size 16/6.50-8 Power requirement approx. 30 kW / 41 hp Required hydraulic control valves 1x single-acting PTO speed rpm 540 PTO shaft with overload protection (star ratchet) PTO shaft profile 1 3/8", 6-piece Warning signs standard Lighting optional accessory Weight approx. 822 kg Special equipment: - Lighting with LED Internal number 14392 Net price: 10,300.00 EUR Gross price: 12,257.00 EUR Location: null

Condition: new, Year of construction: 2026, _____Mounting category I + II Working width approx. 5.80 - 6.60 m Swath width approx. 1.20 - 1.80 m Transport width approx. 2.75 m Transport height approx. 3.70 m (with tine arms mounted) Transport height approx. 3.18 m (with tine arms dismounted) Transport length approx. 4.66 m Rotor diameter 2.74 m Tine arms per rotor 10/10 Double tines per arm 4 Tire size, rotor chassis 3 x 16/6.50-8 Tire size, transport chassis 10.0/75 - 15.3 Power requirement approx. 19 kW / 26 hp Fpodpfx Aszgqrbjhdsn Required hydraulic connections 1 x single-acting Rotor height adjustment mechanical PTO speed rpm 540 Standard PTO shaft included PTO shaft profile 1 3/8", 6-piece Freewheel in the secondary drive included Warning signs included Lighting included Weight approx. 1350 kg Optional equipment: - Individual lifting, electric preselection - Tandem axle with wheels 16/6.50-8 Internal number 14394 Net price: 17,900.00 EUR Gross price: 21,301.00 EUR Location: null