Used Doosan Solar 255Lc-V for sale (420)

Condition: used, Year of construction: 2016, operating hours: 9,321 h, Hydraulic S. W. system from 2018, Rototilt R8 suitable for 28000 to 32000 kg devices, grapple and hammer device, stick approx. 3000 mm, air conditioning, , Vehicle can be covered with advertising and/or labeled. Bwsbvsvy Ridedb Epel Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Year of construction: 2007, operating hours: 7,265 h, Doosan DX 255 LC crawler excavator, year of manufacture: 2007, operating hours: 7,265h, quick coupler Verachter CW 40, engine: Doosan [128.7kW/175hp], central lubrication, backhoe bucket 1,400mm, air conditioning, heating, hammer/grab line, demolition grid, weight: 24,600kg, ready for immediate use, Bebvsvi Tvlsdb Epewl On request, we can make you a leasing or financing offer, Mr. Mihm(Tel. will be happy to assist you, Further information can be found on our homepage, Errors and prior sale excepted! _____ English: Doosan DX 255 LC crawler excavator, year of manufacture: 2007, operating hours: 7.265h, quick coupler Verachtert CW40, engine: Doosan [128,7kW/175hp], central lubrication, backhoe bucket 1.400mm, air conditioning, heating, hammer/grapple line, demolition grid, weight: 24.600kg, ready for immediate use, On request we can make you a leasing or financing offer, Mr. Mihm(Tel. will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale!

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: MS0003-000018, turning length: 320 mm, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, tool length: 120 mm, tool diameter: 16 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc 31i-A Max. machining diameter: Ø 32 mm Max. machining length without re-clamping: 320 mm Gang tool holder - Max. front drilling/tapping: Ø 13 mm / M12 Max. drilling/tapping: Ø 8 mm / M6 Max. back drilling/tapping: Ø 10 mm / M8 Tool configuration Max. number of mountable tools: 24 Turning tools: 6 pcs Front machining tools (drilling): 4 pcs Cross machining tools: 4 pcs Deep hole drilling tools: 2 Back machining: 4 + 4 Tool size Turning tool holder: 16 x 16 x 120 mm Sleeve: Ø 25 mm [front tool holder Ø 32 mm] Spindle and Axis data Main spindle speed: 8,000 rpm Cross tool speed: 6,000 rpm Sub spindle speed: 8,000 rpm Rapid traverse: 32 m/min Main/sub spindle indexing: 0.001° Center height: 1,060 mm Chuck & guide bush Main/sub spindle chuck: TF37 Guide bush: TD32S Mandrel for front, back and cross tools: ER16 [front tool holder ER20] Bsbvdewcn Eyeb Epswl Motors & drive Main spindle motor: 5.5 kW / 7.5 kW Sub spindle motor: 2.2 kW / 3.7 kW X1, Y, Z1 axis motor: 1.0 kW X2, Z2 axis motor: 1.0 kW Cross tool motor: 1.0 kW Rear tool motor (rotating): 1.0 kW Coolant pump motor: 0.4 kW MACHINE DETAILS Energy requirement: 22 kVA Coolant tank capacity: 180 L Machine dimensions (L x W x H): 2,630 x 1,300 x 1,800 mm Machine weight: 3,500 kg Bar loader: Top Automazioni Record

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Bwebvdjwc Sicjb Epjl Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: excellent (used), Year of construction: 2022, Doosan DBM 2030 Bridge Mill Bsbvjv Iq Hfodb Epowl Double Column and Bridge Type Machining Center Installed 2022 Control: Fanuc 31i-B, 15" Screen Contact us for specifications

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Bwebsvzln Revdb Epsl engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Year of construction: 2022, operating hours: 1,800 h, Field of application: Construction Serial number: DXCCEBDPCM002xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18806 Bjbjvgz Drjvdb Epewl Specifications: - 2022 model - Hours: approx. 1800 (will increase) - 129.4 kw - Certified - Belt width: 60 cm - Machine width: 300 cm - Undercarriage (see pictures) - Central lubrication - Makin GPS - Digging bucket - Cleaning bucket - Hammer - Rototilt - Service history - AC/climate - App controlled webasto - Radio/Dab - Delivery by agreement Description: 2022 Doosan excavator which is in very good condition. Services have been taken at a brand dealer and are still subject to agreement. Comes with the SMP digging tray that came with the machine. 2022 Engcon rototilt and Makin GPS. Can come with a clamp in hardox for NOK 30,000 Delivery by agreement. Hours: 1800 Year controlled: Yes Width: 300 Kw: 129.4

Condition: good (used), Year of construction: 2011, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, Bebjwgcatovdb Epswl spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor,

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo Bebswcnubovdb Epewl

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 3110mm Measurements depth 2412mm Measurements height 3143mm Machine weight 6500 kg Control Unit Brand FANUC Main Drive Spindle speed range 12000 r/min Spindle motor power 18.5 kW Number of axis 3 Movement Bsbvdb Eovxbqpopjwl X-Axis Movement 1020 Y-Axis Movement 540 Z-Axis Movement 510 Additional Equipment Renishaw Touch Probe 4th Axis Ready This 3-axis DOOSAN DNM 500 II vertical machining center was manufactured in 2014. Ideal for precision machining, it features a robust design and advanced control systems. If you are looking to get high-quality milling capabilities, consider the DOOSAN DNM 500 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2020, Doosan Puma TT2100SYY Mfd. 2020 Tooled as pictured Bar feed: FMB Turbo 565 (12ft) Mfd. 2019 Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM Bobvdb Ejvniakjpswl RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM MP SYSTEMS 1000 PSI HIGH PRESSURE COOLANT Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING SPECIFICATIONS: Machining Length     27.38"

Condition: good (used), power: 202 kW (274.64 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 7,757 h, Equipment: air conditioning, General information Field of application: Construction Serial number: DHKCECEAVJ0020520 Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL08P Top speed: 6 km/h Empty weight: 31.800 kg Condition Technical condition: good Visual appearance: good Other information Undercarriage condition: 80 Output of the auxiliary hydraulics: 248 l/min Bebowgnyfjvdb Epjwl Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,7x3,2x3,615 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: good (used), Year of construction: 2006, CNC lathe Daewoo Lynx 220 B CNC Fanuc 320 mm maximum cutting diameter, 510 mm stroke, 305 mm max. turned length, 51 mm bar capacity, 11 kW motor, Fanuc i-Series control, Bsbjvn Tu Sovdb Epowl

Condition: used, Year of construction: 2020, operating hours: 7,529 h, 2020 | Doosan | Doosan DL580-5 | Used Wheel Loader | 7529 hours 📍Location: France, Bourg-de-Péage 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 115000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 50 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Bebvdswgzafob Epjwl Good overall condition and operational. The service brake is operational, but its effectiveness is limited and requires a pressure check. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38411 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2018, operating hours: 7,450 h, Field of application: Construction Serial number: DHKCEWBSVH500xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20213 Specifications: - 2018 model - 7450 Hours (will increase slightly) - 17,700 kg - 102.1 kW - Articulated boom - Blade - Central lubrication - G60 HK-mount - Stage 5 engine - 4 new rear tires - K80 trailer with electric hydraulics - Engcon ec219 rototilt - 650 l Gjerstad sanding bucket (new knife) - Tool cabinet - Wheel guards - Support legs Bobvdowdvg Isb Epewl - Blade - Lights - Air conditioning/ac - Radio - Ready to deliver Description: We have a 2018 Doosan DX165W-5 wheeled machine w/ K80 trailer hitch with electric and hydraulics, articulated boom, Engcon ec219 rototilt, Gjerstad sanding bucket for sale.u The machine is well maintained and cared for by the owner. It will be serviced again before sale. Ready for delivery Hours: 7450 Total Weight: 17700 Kw: 102,1

Year of construction: 2020, Condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Bwebvdb Eov Tfk Aepol Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Application Types Turning

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,317 h, Equipment: air conditioning, General information Field of application: Construction Serial number: DHKCEBBWTG0001283 Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Bwobvdewfmm Iob Epsl Condition Technical condition: good Visual appearance: good Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2019, operating hours: 6,631 h, Equipment: air conditioning, General information Field of application: Construction Serial number: DHKCEBBWTJ0001744 Technical information AdBlue system: Yes Make of engine: DL06P Top speed: 6 km/h Empty weight: 24.900 kg Condition Technical condition: good Visual appearance: good Other information Undercarriage condition: 70 Output of the auxiliary hydraulics: 222 l/min Bwobewgnx Usvdb Epol Dipper / stick length: 240 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,025x2,99x3,08 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), Year of construction: 2005, Doosan S400 CNC 2 Axis Turning Centre Bwebvsv Epzpsdb Epel Fanuc Oi-TC Control Manufactured 2005 Tool Setting Arm 12” 3 Jaw Chuck 12 Station Turret Tail Stock Swarf Conveyor (Not photographed) Tooling as photographed. Bar Capacity 76.5mm Max Cutting Dia. 400mm Max Cutting Length 750mm Spindle Motor Power 22KW Spindle Speeds 3500rpm For sale with Jet Machinery Ltd Jet Machinery Stock No: #78861 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2021, operating hours: 1,725 h, 2021 | Doosan | Doosan DX140LCR-5 with Lehnhoff SW10-3 quickcoupler (without bucket) | Used Tracked Excavator | 1725 hours Bjbvowg Inisdb Epowl 📍Location: Germany, Kempten (Allgäu) 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 87500 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 64 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: After maintenance perfect ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37602 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: like new (used), Year of construction: 2018, DOOSAN PUMA GT2600 M 3-axis CNC lathe. Year of construction 2018 "CE". With live tools. FANUC Numerical Control. Chip conveyor. LNS BARFEDEER QLS80 S2 loader Excellent conditions. Datasheet attached. Bwsbvswhbw Todb Epol

Condition: good (used), Year of construction: 2005, Ref. -No.: 10453 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2005 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: Bsbvdb Ejwf Iiwjpewl - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2013, Model: Mynx 5400/50 Control: Fanuc I Series Year: 2013 Table Area: 1200 x 540mm Table Capacity: 1000 Kgs X Axis: 1020mm Y Axis: 540mm Z Travel: 530mm Spindle Taper: BT 50 Spindle Speeds: 8000 RPM 24 Station Tool Changer Through Spindle Coolant (High Pressure) Bjbvdbewb Hche Epjwl Dimensions: 5300 x 3400 x 3000mm High Weight: 7000 KGS

Condition: good (used), power: 102 kW (138.68 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 7,656 h, Equipment: air conditioning, General information Field of application: Construction Serial number: DHKCEWANLG5001676 Bwsbswfhn Hevdb Epjl Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DL06P Performance Top speed: 37 km/h Weights Empty weight: 15.050 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Output of the auxiliary hydraulics: 170 l/min Dipper / stick length: 498.8 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,01x2,5x3,052 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand FANUC Model Series 31i-MODEL B5 Main Drive Spindle speed range 12000 1/MIN Movement X-Axis Movement 3000 Y-Axis Movement 850 Z-Axis Movement 800 B-Axis Movement 220° continuous MM Bobjv Nrztovdb Epjwl Table Outer length 3500 mm Outer width 870 mm Table load 3500 kg Media Chip conveyor Yes Additional Equipment Centering probe CE, conveyor This 5-axis DOOSAN VCF 850 LSR was manufactured in 2015. It is a universal machining centre designed for versatile and efficient machining tasks. If you are looking to get high-quality milling capabilities, consider the DOOSAN VCF 850 LSR machine we have for sale. Contact us for more information. Application Types Milling