Used Doosan Dx420Lc for sale (327)

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 1,649 h, functionality: fully functional, machine/vehicle number: MV0108-000036, travel distance X-axis: 1,040 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, table width: 1,200 mm, table length: 520 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, CNC machining center for mass production of small parts featuring two vertical spindles (operating in parallel) TECHNICAL DETAILS Travel X-axis: 1,040 mm Gsdpfx Ajw Ucx Rjbrjkc Travel Y-axis: 520 mm Travel Z-axis: 600 mm W-axis: 20 mm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Spindle Type: ISO #40, 7/24 Taper Torque: 117.8 Nm Spindle speed: 12,000 rpm Spindle motor power: 11 - 18.5 kW Spindle orientation: Built-in sensor Drive type: Direct drive Work table Table surface: T-slots (4-125 x 18H8) Table size: 1,200 x 520 mm Maximum workpiece height: 680 mm Maximum workpiece weight: 800 kg Distance spindle to table: 150 - 750 mm Automatic Tool Changer Tool holder: MAS403 BT 40 Number of tool stations: 2 x 30 Tool selection: Memory Random Max. tool diameter: 80 mm Max. tool diameter (with adjacent stations empty): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool tightening torque: 5.88 Nm Tool-to-tool change time: 1.7 s Chip-to-chip time: 3.5 s MACHINE DETAILS Power supply: 380 V Rated power: 60 kVA Full load current: 105 A Short-circuit capacity: 5 kA Overall height: 3,510 mm Overall length: 2,400 mm Overall width: 2,750 mm Total weight: 8,500 kg EQUIPMENT - Control: FANUC - W-axis for tool length setting - Distance between spindle centers: 400 mm - Two tool changers with 30 tools each - Tool holder: BIGPLUS BT 40 - High-pressure through-spindle coolant: 2 MPa and 4 kW - Tool breakage monitoring - Portable handwheel - 4th axis preparation

Condition: like new (used), Year of construction: 2022, functionality: fully functional, CNC-Turning and Milling Centre - Horizontal / Brand: DOOSAN Type: PUMA 5100 XLYB / Year of construction: 02/2022 (Start-up: 07/2022) Universally applicable, highly stable, horizontal turning centre with high performance. For heavy-duty machining of medium and large parts. Operating hours (August 1st, 2025): 592 h Condition: As new / ready for immediate use. The machine can be inspected by appointment under power. TECHNICAL DATA: - Swing over bed: 880 mm - Swing over saddle: 817 mm - Recom. turning diameter: 380 mm - Max. turning diameter: 550 mm - Max. turning length: 3.040 mm Capacity: - Chuck size: 533 mm - Chuck work weight (incl. chuck): 1.400 kg - Shaft work weight (incl. chuck): 5.700 kg - Bar working diameter: 165,5 mm Godpew Hg Risfx Abrjkc Power source: - Electric power supply (rated capacity): 68,79 kVA Machine dimensions: - Length: 7.303 mm - Width: 2.632 mm - Height: 2.937 mm - Weight: 16 tons EQUIPMENT: - CNC-Control: FANUC i PLUS - Steady rest, Brand: SMW-Autoblok - Tailstock, MK5 - Tool magazine - Chip conveyor (hinged belt) - Flushing gun - Documentation - CE marking A wide range of additional accessories can be additionally purchased. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,420 h, load capacity: 3,000 kg, lifting height: 4,700 mm, mast type: triplex, Equipment: pallet forks, sideshift, Doosan forklift D30G Fuel: diesel Year of manufacture: 2019 Operating hours: 1420 Triplex mast and sideshift Gkedpfx Abjw R U Nyjroc 4th valve

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked Gsdpfxjw Dgcae Abrekc on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: excellent (used), Year of construction: 2022, Swing over bed 850mm, Swing over cross-slide 670mm, maximum machining diameter 420mm, maximum machining length 765mm, bar capacity 102 mm, Gedpfx Ajww E Inobrjkc Y axis -/+ 65mm, 12 station turret, spindle speed 2,800 rpm, milling speed 5,000rpm, Fanuc I control ,12” 3 jaw, tool setter, swarf conveyor.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 49 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 940 mm, fuel type: gas, mast type: triplex, construction height: 2,155 mm, fork length: 1,200 mm, empty load weight: 4,641 kg, drive type: Treibgas, LPG Forklift Load Center: 500 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Torque converter Condition: As new Technical Condition: Very good Front Tires Type: Solid rubber (super elastic) Front Tires Size: 28x9-15 Rear Tires Type: Solid rubber (super elastic) Gkodjw Aiyfepfx Abrsc Rear Tires Size: 6.50-10 Description: In addition to this machine, we offer further forklifts and warehouse technology equipment. All our machines have been inspected by our workshop and certified according to FEM4.004. Please contact us via email or by phone. You will also find us at hsr-gabelstapler. We are happy to purchase your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing available on request at attractive terms. We offer professional and comprehensive advice on all our vehicles. Side shifter, 3rd hydraulic valve, 4th hydraulic valve, rear work light, front work light, half cab, load guard, full free lift, interior mirror, exterior mirror, beacon, windshield wiper, single pedal, LED, seat.

Condition: good (used), Year of construction: 2007, operating hours: 25,033 h, functionality: fully functional, machine/vehicle number: VMD4500023, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 20,000 rpm, spindle speed (min.): 1 rpm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,750 mm, total width: 2,480 mm, total length: 3,300 mm, type of input current: AC, torque: 27 Nm, spindle motor power: 11,000 W, Equipment: documentation/manual, The production machine will be available from October 2025! We are pleased to assist you with technical inquiries by phone. Godpfx Aow Sr Nmjbrskc

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, turning length: 2,042 mm, turning diameter: 650 mm, spindle motor power: 45 W, spindle speed (min.): 15 rpm, spindle speed (max.): 1,500 rpm, spindle bore: 165 mm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, bar passage: 165 mm, total height: 2,400 mm, total length: 6,700 mm, total width: 2,050 mm, spindle nose: ASA 15, overall weight: 12,050 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED 2-axis CNC lathe "DOOSAN mod. PUMA 5100LB" with CNC DN Solutions-Fanuc 0i-TF Gkedpfx Abow Ek T Sjrsc

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 12500 kg Media Chip conveyor Yes This DOOSAN VT 900 was manufactured in 2007. It's a vertical turning machine featuring a CNC FANUC Oi-TC, a chuck diameter of 630 mm, and a conveyor. Weighing 12500 Kg, it also meets CE standards. Consider the opportunity to buy this DOOSAN VT 900 vertical turning machine. Contact us for more information. Godpfx Ajw H Twhjbrjkc Application Types Turning

Condition: good (used), Year of construction: 1999, Daewoo Lynx 200 CNC Lathe Model: Lynx 200 Year: 1999 Swing over Bed: 460mm Swing over Saddle: 350mm Max. Turning Length: 300mm Travels X/Z: 160 / 330mm Spindle Bore: 62mm dia. Spindle Speeds: 3000 RPM Machine with: 3-jaw chuck 10 station Turret Tailstock Swarf Conveyor Gkjdpfx Abowt A Rlsrec

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, Gkodpfx Abswwtrbjrec 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2023, operating hours: 1,260 h, functionality: fully functional, Doosan Puma DNM 5700 Control system: Heidenhain TNC 620 Clamping area of table: 1300x570 mm Travel X-axis: 1050 mm Travel Y-axis: 570 mm Travel Z-axis: 510 mm Spindle speed: 0 - 12,000 rpm Number of driven axes: 4 Coolant pressure: 20 bar Spindle taper: SK 40 Max. load of table: 1,000 kg Gkedpfx Abjw Tni Esrec Tool magazine: YES Number of magazine positions: 30 Machine weight: 6,500 kg Measurement probe Operating hours: 1,260 h

Condition: good (used), Year of construction: 2008, operating hours: 29,593 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 25 m/min, total height: 3,136 mm, total width: 2,693 mm, total length: 4,175 mm, overall weight: 7,000 kg, Equipment: documentation/manual, The production machine will be available from October 2025! Control system: FANUC 21 iMB We are happy to answer your inquiries by phone. Gjdpfx Abow Sr H Eerokc

Condition: good (used), Year of construction: 2008, operating hours: 9,267 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 30 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of spindles: 60, tool length: 550 mm, tool diameter: 250 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Gksdpfxjtvf Sme Abrec

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning Gjdowzc N Rspfx Abrjkc

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Gksdpfowyun Aex Abrsc Samchully 3 chuck 400 mm with jaws Max. turning Ø: 790mm X-Axis: 352mm Z-Axis: 1105mm Spindle bore: 116.5mm Speedrange: 2000Rpm Spindle power: 37kW ATC / revolver: 10 Speed live tools:4000Rpm Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table width: 800 mm, table length: 800 mm, Year of manufacture: 2007 and 2009 XYZ travel: 1250 x 1000 x 1000 mm B axis: 360 x 1 degree Pallet size: 800 x 800 mm Tool holder: SK 50 Spindle speed: 6000 rpm Magazine: 60 positions IKZ (internal coolant supply) Technical machine data: - Maximum workpiece height: 1200 mm Godpfxow Rd S Rj Abrekc - Number of magazine positions: 60 - Tool holder: A50, DIN 69871 B, max. tool length: 550 mm - Max. tool diameter: 250 mm / with free adjacent space, max. tool weight: 25 kg - Macro package - Tool offsets: 200 - Fanuc 18 - Extractor - Hinged belt chip conveyor - Machines have 20,000 and 25,000 cutting hours - Number of pallets: 2 - Weight: 21,000 kg

Condition: used, machine/vehicle number: 16241, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 4,730 mm, free lift: 1,000 mm, load center: 500 mm, construction height: 2,230 mm, fork length: 1,200 mm, enginetype: Electric, manufacturer: Doosan Gkodpfxjw R Dvie Abrsc

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VM510366, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 25 m/min, total height: 3,136 mm, total width: 2,693 mm, total length: 4,175 mm, overall weight: 7,000 kg, Equipment: documentation/manual, Manufacturing machine available from November 2025! Control type: FANUC 21 iMB We are happy to assist you with your inquiries by phone. Gjdew Sr Euepfx Abrekc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Gjdpow D Aynjfx Abrokc

Condition: used, Year of construction: 2017, Doosan Puma 2100LY CNC lathe with Y axis Year of manufacture: 2017 Fanuc i Series with Manual Guide Max turning length: 760mm Max turning diameter: 406mm Chuck: 210mm Samchully Spindle bore: 65mm Tool turret: 12/24 BMT55 Axis travels: X axis – 260mm Z axis – 830mm Y axis – 105mm Tailstock Renishaw probe Included with the machine: - 2 driven tool holders 1/1 - 8 standard tool holders - LNS chip conveyor Gkodpfxjw E Iwuo Abrjc - Coolant tank with pump - Machine documentation Low operating hours, very good condition

Condition: new, machine/vehicle number: 16239, Year of construction: 2021, load capacity: 1,400 kg, lifting height: 7,000 mm, load center: 600 mm, construction height: 3,070 mm, fork length: 1,200 mm, overall weight: 3,237 kg, enginetype: Electric, manufacturer: Doosan Gksdpfjw R Dvcox Abroc

Condition: used, Year of construction: 2006, operating hours: 18,091 h, functionality: fully functional, machine/vehicle number: P60M0396, turning length: 1,600 mm, turning diameter: 900 mm, spindle motor power: 45,000 W, spindle speed (min.): 3 rpm, spindle speed (max.): 1,500 rpm, spindle bore: 181 mm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 16 m/min, feed length Z-axis: 1,650 mm, torque: 6,602 Nm, total height: 2,780 mm, total length: 5,760 mm, chuck outer diameter: 630 mm, bar diameter (max.): 164 mm, quill stroke: 150 mm, quill diameter: 160 mm, quill travel distance: 1,550 mm, swing diameter over cross slide: 800 mm, spindle nose: A1-15, overall weight: 16,100 kg, turning diameter over bed slide: 1,030 mm, Equipment: documentation/manual, The production machine will be available from October! Control: FANUC Control type: 21i-tb We are happy to answer your inquiries by phone. Godpew Srx Uefx Abrekc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-640, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 900 mm, spindle motor power: 32 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED DOOSAN VCF 850L-II traveling column machining center with HEIDENHAIN TNC-640 CNC Godpjw Dcl Rjfx Abrskc

Condition: reconditioned (used), Year of construction: 2006, operating hours: 13,584 h, turning diameter over cross slide: 770 mm, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 37 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,050 mm, total length: 42,640 mm, total width: 22,000 mm, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe “DOOSAN mod. PUMA 400B” with Fanuc 21i-TB CNC Gedetvprcspfx Abrekc