Used Doosan Solar 140Lc-V for sale (296)

Condition: used, Year of construction: 2001, Daewoo Puma V300 CNC Lathe Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of installation: 2001 Kitagawa chuck, diameter 305 mm Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Max. turning height: 420 mm Spindle speed: 2,500 rpm AC motor power (cont./30 min.): 18.5 kW Turret with 8 tools Cedpeyahy Dofx Abwera Drilling diameter: 50 mm Tool section: 25 mm Control: Fanuc Series 18-T Equipped with chip conveyor Complete with documentation

Condition: good (used), Year of construction: 2005, spindle speed (min.): 3,000 rpm, travel distance Z-axis: 450 mm, Model Year: 2005 Chuck Diameter: 12" Number of Axes: 2 Length: 450 mm Spindle Bore Diameter: 350 mm Spindle Speed (RPM): 3000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek Cjdpfx Abox Nvtfowjra

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m Csdpovzln Refx Abwjra The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! Codpfx Abeyyy H Rowora - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: good (used), Year of construction: 2011, In good technical condition and fully functional. Year of manufacture: 06/2011. Fanuc control system. Axis travel – X-axis 2400 mm, Y-axis 960 mm, and Z-axis 800 mm. Credeyu Nb Sspfx Abwea

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Crsdpfxstzgaqj Abwsa Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Cjdpfx Abox D Dz Dowera Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm Cedpfeq Nqkxjx Abwsra DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,060 h, load capacity: 3,500 kg, lifting height: 5,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,640 mm, power: 44 kW (59.82 HP), Equipment: lighting, sideshift, trailer coupling, Diesel Forklift DOOSAN D35C-5 Year of manufacture: 2010 According to hour meter: 8,060 hours Lifting capacity: 3.5 tons Overall height: 2.64 meters Lifting height: 5.65 meters 43.7 kW Yanmar engine - Triplex full free lift mast Crodpfsyvy Dnsx Abwoa - Sideshift - Fork positioner - Wide fork carriage - Twin tires - Lighting system - Original, immediately ready-for-use condition with original paint! - Simple forklift with minimal electronics! Selling price: €10,900 net Affordable delivery also possible!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Crjdpfjv Iq Ezjx Abwea Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg Cedjyxb S Sepfx Abwsra

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 18000 kg Control Unit Brand FANUC Model FANUC 18I TB Main Drive Spindle speed range 2000 RPM Spindle motor power 30 kW Tool taper ASA A2-11 Number of axis 2 Movement X-Axis Movement 380 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 20 m/min Turret Number of turrets 1 Additional Equipment Holders for External Turning: HO10-25RL (4 pcs) Holders for Face Turning: HF10-25RL (2 pcs) Holders for Internal Turning: HB10-50N (4 pcs), HB10-40N (2 pcs) Reduction Sleeves: BS 40-10, -12, -16, -20, -25 (2 sets) This DOOSAN V740T vertical turning machine was manufactured in 2005. It features a maximum swing diameter of 800 mm, turning diameter of 740 mm, and a turning length of 760 mm. The main spindle supports a rotational speed up to 2000 RPM with a motor power of 30 kW. It includes a 12-position turret and rapid traverse rates of 20 m/min for both X and Z axes. If you are looking to get high quality turning capabilities consider the DOOSAN V740T machine we have for sale. Contact us for further details regarding this machine. Crsdsx D R R Eopfx Abwja Application Types Turning

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Codpfx Aboyma H Nswsra Rated power: 53.3 kVA Interrupting capacity: 5 kA Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

Condition: good (used), Year of construction: 2005, operating hours: 24,000 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Fanuc, controller model: 21i, table load: 150 kg, spindle speed (min.): 10,000 rpm, spindle nose: ISO 30, number of slots in tool magazine: 14, Equipment: chip conveyor, TEHNICAL DATA : X- axis travel: 520 mm Y- axis travel: 320 mm Z- axis travel: 350 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 48 m/min Spindle nose- table distance: 150 ~ 470 mm Pallet size: 2 - 650 x 355 mm Pallet change time: 4s Table loading capacity: 2 x 150kg Max. spindle speed: 10.000 rpm/min Tool taper : ISO 30 Spindle power : 7.5kW Max. spindle torque: 49Nm Csdpfx Asyk Sk Ujbwsra Height: 2.430mm Length: 1.700mm Width: 2.900mm Weight: 5.000kg Additional options : Chip conveyor 4th axis preparation Pneumatic fixture preparation Workspace flushing with coolant

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, overall weight: 15,000 kg, chain condition: 90 %, Year of construction: 2019, operating hours: 4,350 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Doosan DX 140LCR-5 with adjustable boom and HS 10 attachment, with 4,080 operating hours, year of manufacture 12/2019. Major service and statutory UVV inspection recently completed. Price and attachments on request. Codpfx Abeww T Aajwjra

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 34, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, controller model: FANUC, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 80 rpm, table height: 560 mm, table load: 300 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Crodpsu T Hg Tsfx Abwoa

Year of construction: 2007, condition: used, machine/vehicle number: VM640033, Vertical machining center with 3 axes Cjdpjgay Ngefx Abwera DOOSAN ACE-VM640 FANUC 21I-MB Accessories: Chip conveyor belt Remote electronic handwheel Automatic high-pressure cooling system pressure through the spindle line

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, rotary table diameter: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, Used 5-axis universal traveling-column machining center with Heidenhain TNC-530 CNC, swivel head, integrated rotary table. Codexixn Nspfx Abwjra

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 40, total height: 2,391 mm, total length: 3,110 mm, total width: 2,960 mm, overall weight: 7,800 kg, table length: 475 mm, table width: 712 mm, controller model: FANUC, coolant supply: 20 bar, spindle motor power: 18 W, rapid traverse Z-axis: 36 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 12,000 rpm, spindle speed (min.): 60 rpm, table load: 300 kg, tool diameter: 125 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center "DOOSAN model VC430" with CNC Fanuc 0i-MD Crsdpfx Abjwdgk Rowea

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-640, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 900 mm, spindle motor power: 32 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED DOOSAN VCF 850L-II traveling column machining center with HEIDENHAIN TNC-640 CNC Cedpfow Dcl Rsx Abwsra

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, turning length: 400 mm, turning diameter: 420 mm, spindle motor power: 22 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 488 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, type of input current: three-phase, total height: 3,210 mm, total length: 3,600 mm, total width: 1,900 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN 3-axis CNC vertical lathe with live tools and C-axis Csdsx Sqafjpfx Abwsra

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 1,270 mm, turning diameter: 1,100 mm, spindle motor power: 55 W, spindle speed (min.): 5 rpm, spindle speed (max.): 850 rpm, travel distance X-axis: 580 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, workpiece weight (max.): 2,000 kg, total height: 4,012 mm, total length: 3,555 mm, chuck outer diameter: 800 mm, total width: 2,850 mm, spindle nose: ASA 15, overall weight: 22,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Used ​​2-axis vertical lathe "DOOSAN mod. Puma VT1100" with CNC Fanuc 21i-TB Crodpfxswrdqko Abwja

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; Crsdpfx Aox Ncpgjbwea rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray;

Condition: good (used), Year of construction: 2007, operating hours: 25,033 h, functionality: fully functional, machine/vehicle number: VMD4500023, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 20,000 rpm, spindle speed (min.): 1 rpm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,750 mm, total width: 2,480 mm, total length: 3,300 mm, type of input current: AC, torque: 27 Nm, spindle motor power: 11,000 W, Equipment: documentation/manual, The production machine will be available from October 2025! We are pleased to assist you with technical inquiries by phone. Crodpfxew Sr Nms Abwja

Year of construction: 2022, operating hours: 33 h, condition: used, functionality: fully functional, empty load weight: 26,851 kg, fuel type: diesel, total length: 5,515 mm, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, fork carriage width: 2,540 mm, drive type: Diesel, load capacity: 16,000 kg, construction width: 2,555 mm, Heavy-duty forklift truck - Diesel Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm ISO Class: Pin-Type Mast type: Triplex Transmission: Hydrodynamic Condition: As good as new Technical condition: New Crjdst Ilqnspfx Abwja Front tires type: Air Front tires Size: 12.00 R20 28PR Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 12.00 R20 28PR Rear tires Condition: 80 - 100% Description: Full cab with heating and air conditioning, STVO lighting, work lights front + rear, BlueSpot rear, 3rd + 4th valve up to fork carriage, radio, rotating beacon, scales, reversing camera, hand lever Sideshift, fork positioner, Tines individually adjustable Opening dimension: IK- IK from 85- 1925 mm 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, air conditioning, full free lift, scales, safety light, interior mirror, exterior mirror, rotating beacon, windshield wiper, seat heating, LED, seat, 5th valve