Used veneer presses for sale (24)

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm² Celhjyalmbscdwzspw

Condition: ready for operation (used), Year of construction: 2025, pressing force: 122 t, This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Additional equipment • Mylar Foil Attached to Upper and Lower Press Plates • Electronic Flatness Control (EFC) for Incorrect Loading Protection Machine Benefits Technical Machine Benefits • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 pcs • Number of levels: 1 • Level opening: 370 mm • Max temperature of heating medium: 120°c • Working temperature: 70-90°c • Installed electrical heating power: 18 kw • Operating voltage: 400 v- 50hz- 3 ph Extra Information Features: Touch Screen SIEMENS 4.3 Inch TFT Digital Press Timer Digital Temperature Controller Digital Working Pressure Controller Cpelheyan Sgjcdwzsw Day/Week Timer for Heating Switch-On Time Automatic Hydraulic Pressure Calculation Error Display and PLC Control Save and Recall up to 200 Work Programs Pre-Press Pressure and Time Settings Safety Devices: Two-Hand Release with Safety Circuit Safety Rip Cord around the Machine Safety Support for Lower Press Table Protective Plate for Rack/Gear Safety Instructions Sticker CE Standard Compliance CE Declaration of Conformity Special Processing of Solid Steel Heating Plate Surface Switching Off Left Cylinder Row

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²Plate: 110 X 240 cm, 120T, 5kg/cm2 Cpjlhcdsx U Tv Iewzjw

Condition: ready for operation (used), Year of construction: 1996, Main Drive Celhcdex D E Avswzjpw Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: ready for operation (used), Year of construction: 1996, pressing force: 70 t, Main Drive Pressing force 686 Kn This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Celhcdwjx D D Nnszopw Application Types Pressing / Laminating

Condition: used, Year of construction: 1978, Max. pressing length: 2500 mm, max. pressing width: 1250 mm, total pressing force: 80 t, specific pressing pressure: 2.5 kg/cm², press opening height: 400 mm, heating plate material: gold-anodized, operation: push-button control, swivel switch: yes, number of ram cylinders: 4 pcs., safety treadle strip: yes, weight approx.: 3500 kg, dimensions: 2900 x 1420 x 1920 mm, total connected load: 17.5 kW. Location: Nattheim Celoyffrbehcdwzjpw

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminum energy-saving plates (The spots visible in the photos are purely optical; the plates are in perfect condition) Total pressing force: 80 t Press cylinders: 4 x 90 mm Opening stroke: 400 mm Weight approx. 3,100 kg Overall length: 2,610 mm Overall width: 1,240 mm Overall height: 1,890 mm Motor power connection: 1.1 kW Csljx Enp Rshcdwzspw Connection per electric heating plate: approx. 6.6 kW Weight approx. 3.1 t Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1977, Used machine Year of manufacture: 1977 Condition: Currently still in production Technical data: Plate size: 2200 x 1100 mm Max. opening: 315 mm Heating medium: Electric Pressing pressure: 2.7 kg/cm² Cylinders: 4 Including safety cable Dimensions: 2540 x 1220 x 1850 mm Weight: Approx. 2500 kg Cslhjyig Hfscdwzopw Location: Hesse Availability: End of March 2026

Condition: used, Year of construction: 1969, Used machine Technical specifications: Plate size: 2200 x 1200 mm Maximum opening: 315 mm Heating medium: Electric Motor connection: 1.1 kW Connected load per plate: approx. 4.5 kW Pressing pressure: 2.7 kg/cm² Cylinders: 4 x 75 mm Dimensions: approx. 2600 x 1350 x 1760 mm Csloxuxhashcdwzepw Weight: approx. 2600 kg Availability: short notice Location: Röllbach

Condition: ready for operation (used), Veneer press with 30 floors Cjljyh A E Ujhcdwzspw Size of press plates 3000 x 1650 mm Hydraulically operated. Hot water for heating In-feed system and out-feed system included

Condition: refurbished (used), functionality: fully functional, pressing force: 120 t, Refurbished six-piston hydraulic flat press of Italian manufacture. Branded multi-daylight press for easy wood veneering. Cpolhcdsyi U Rnswzow Veneer plate dimensions: 2500 x 1300 mm Large plate opening: 510 mm Pressure across full area: 3 kg/cm2 Total maximum pressure: 120 tons Number of hydraulic pistons: 4 MYLAR Teflon foil on plates Prepared for water heating of plates Option to install a hot water boiler The machine is refurbished, adjusted, and tested. Price: 7,600 EUR ex VAT

Condition: excellent (used), Year of construction: 1989, operating hours: 7,398 h, functionality: fully functional, machine/vehicle number: 5/875, opening width: 400 mm, input voltage: 380 V, Types: LZT 90, machine number: 5/875, year of manufacture: 1989, press table: 2550X1300X400 mm, hours: 7398, 6-cylinder, anodized plates, power supply: 3/380V/50Hz Colhcdwoyhm U Ajzopw

Condition: like new (used), shelf length: 3500 mm shelf width: 1300 mm shelves made of stainless steel pistons and seals replaced number of pistons: 10 piston diameter: 85 mm Colhjyfr T Escdwzspw water heating weight: 6100 kg

Condition: used, Veneer Press OTT JU 90 -used- Cpolhcswmmrajdwzjw ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: used, Year of construction: 1991, High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Cpelhcewng Tmedwzsw Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, total width: 1,800 mm, total length: 3,600 mm, total height: 2,100 mm, Empty weight: 3.750 kg Veneer press Steton P 70 E Year of construction 2015 Press size 3100x1300mm Opening 450mm Number of cylinders 6pcs. Cylinder diameter 70mm Electric heating 19.6kW, max. 120 degrees Max. pressing pressure 70 tons Pressure 2 KG/cm² Cpoljwnh R Tohcdwzjw Dimensions. 3600 x 1730 x 2060mm, weight 3750kg - Year: 2015 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3600mm x 1800mm x 2100mm (l x w x h) - Transport weight [kg]: 3750kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button Cjlhsxfg A Hscdwzjpw ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: like new (used), shelf length: 3000 mm shelf width: 1300 mm number of pistons: 6 year of manufacture: 2004 water heating weight: 3900 kg 400 V gap clearance: 400 mm CE marking Cpolex Thniohcdwzew

Condition: used, total width: 1,400 mm, total length: 2,900 mm, total height: 2,000 mm, Empty weight: 1.300 kg Cold Veneer Press Italpresse Jolly/F Press surface 2500x1200mm Press opening 510mm Cjlhjwnhg Iecdwzjpw 4 cylinders Total dimensions 2900x1400x2000mm (LxWxH), weight 1300kg - Documentation available: No - CE certificate present: No - Serial number: 1426 - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1200 - Number of cylinders [pcs]: 4 - Transport dimensions: 2900mm x 1400mm x 2000mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used machine Features and technical data: - Pressing area: 2500 x 1300 mm - With ELKOM gold-anodised energy-saving plates Cslhcoxwz Iusdwzepw - Total pressing force: 80 t - Specific pressure: 2.5-3.0 kg/cm² - 6 pressing cylinders, each with 68 mm diameter - Opening width: 300 mm Dimensions: 3080x1550x1800 mm Weight: approx. 4700 kg Availability: Approx. mid-April 2026 Location: Hesse

Condition: used, Year of construction: 2024, Version: Joos A.B.S. safety system to protect the heating plates in case of incorrect loading or parts left behind. The press is open on all sides, features a robust all-steel construction, and is protected against overload. The maintenance-free hydraulic system is integrated into the oil tank. Step-less pressure adjustment is performed according to a clear pressure diagram. Once the set pressure is reached, the system switches off automatically. Constant pressure is maintained throughout the entire pressing process. The rack-and-pinion guide ensures stable parallel travel of the pressing plates. The press is optimally suited for laminating flat surfaces using adhesives, provided the corresponding technical requirements are met. Technical Data: - Max. pressing force: 1200 kN - Adjustment range: 10 – 100% - Total pressing area: 3100 x 1350 mm - Specific pressure at full capacity: 3.0 daN/cm² (kg/cm²) - 6 cylinders, 80 mm diameter, 400 mm stroke - Hydraulic working pressure: 398 bar - Press room height: 400 mm - Color: Light grey, RAL 7035 Hydraulics: The following components are integrated into the press's hydraulic system: - 1 oil-hydraulic two-stage high-pressure pump - 1 three-phase motor, 2.2 kW - 1 automatic pressure switch Cpelexplbcjhcdwzow - 1 change-over valve - 1 pressure diagram The hydraulic unit is built into the lower section of the press. Controls: Automatic pressure control via electronic controller with setpoint and actual value display. Operation is performed via a clear control panel. The control cabinet is fully integrated lengthwise in the upper section of the press. Operating voltage: 400 V, 50 Hz, 3-phase. ELECTRIC HEATING PLATE 3100 x 1350, GOLD ANODIZED One lower and one upper electric heating plate, 3100 x 1350 mm. The surfaces are anodized, making them extremely hard, scratch- and abrasion-resistant. High-temperature insulation between the heating plate and the press table. Maximum operating temperature: 120°C. (1 section / 2 heating plates.) TEMPERATURE CONTROL Temperature control R 1.1; each heating plate features an electronic temperature controller and a safety temperature limiter around the edge of the heating plate. SWIVEL PANEL OPERATION Operation is via an ergonomic swivel panel control. Location: Rieth

Condition: used, Used machine Features and technical data: Cpslhcdjwpm I Hjwzow - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 1992, operating hours: 5,000 h, functionality: fully functional, total width: 1,400 mm, total length: 3,200 mm, total height: 2,900 mm, overall weight: 23,000 kg, temperature: 210 °C, pressing force: 200 t, operating temperature: 200 °C, workpiece height (max.): 150 mm, table width: 1,400 mm, table length: 3,200 mm, You can view the machine under power until mid-July 2025. For sale is an almost as-new veneer press with infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of construction 1992). The machine is in excellent condition and has only low usage hours. Machine type: Throughfeed press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of construction: 1992 Cpjlownpcdjhcdwzsw Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Loading: yes Infeed belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Passage height: approx. 100 mm Feed temperature: 200° Thermal output: 45 kW Heating medium: oil Press force: 200 tons The press machine is in top condition, has had very low usage, and has been used exclusively for development projects for the past 15 years. I will gladly send you further information and pictures on request. The machine is immediately available and can be viewed by arrangement at any time. Pick-up only! Function video on request. If interested, I am happy to provide further information or arrange a viewing!

Condition: like new (used), Year of construction: 2004, working width 2700 mm Coloxcn Dtohcdwzspw working height 100 mm hydraulic cutting gauge adjustment to size cast body power supply 400V 3000 kg Year of manufacture 2004