Universal Milling Machine

Deckel FP 2LB

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Iaelhccscxxyhjqmot Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: used, Year of construction: 1970, x-travel 500 mm Islhswk N Rgjccqmsat y-travel 300 mm z-travel 400 mm table surface area 800 x 370 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,5 m/min total power requirement 4,0 kW weight of the machine ca. 1,4 t - machine out of teaching shop - Accessories: univ.-table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, dividing unit with 3-jaw chuck and counter bearing, various tool fixtures, counter bearing, original DECKEL tool cabinet

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Ijlhccqowktfbemjat Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: good (used), Functionality: fully functional, Universal table for DECKEL ; FP - Milling machines Ijlhcswizftecqmoat . Dimensions : 80 x 240 cm .

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue Mach. no.: 57346/08 with guarantee Iaelhccqed I Dtyemst geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Universal table 600 x 260 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used, as seen -

Condition: used, Year of construction: 1978, x-travel 300 mm Iaelhcowk N N Nocqmot y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Serial number 8070 Stock No. 2372 Iaolewi H Hcshccqmet Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee Islohtrd Ishccqmeat geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -

Condition: used, Year of construction: 1970, x-travel 400 mm y-travel 220 mm z-travel 350 mm table surface area 700 x 330 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,5 m/min total power requirement 3,0 kW weight of the machine ca. 1,2 t - machine out of teaching shop - Ijlhjwk N Nvoccqmoat Accessories: solid table, univ. table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, dividing unit with 3-jaw chuck, slotting head, counter bearing, various tool fixtures, original DECKEL tool cabinet

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically Islhccotdnb Eeqmoat as it was built at the time.

Year of construction: 1982, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device Iaolepn Rgvshccqmet - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display Iaolhcechfyfecqmot HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Year of construction: 1976, Condition: reconditioned (used), Universal tool milling machine Iaoleflc N Aehccqmjt Make: DECKEL Model: FP 1 Year of construction: 1976 - workshop tested Machine no.: 53426/08 geometric acceptance with test report Accessories: - 3-axis digital display Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Counterholder with counter bearing - Operating instructions - used, as seen, but without guarantee -

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-2520 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) Ijlhcjhtq Edscqmjat - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Islhemhfrrsccqmjat Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee Iaslhccqofzk Hfomot geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Year of construction: 1978, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report Iaslhccjdf E H Aoqmet accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee Iajlhccqjfcqfpjmjt geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - partially overhauled, newly painted RAL 7035 light gray / RAL 7046 telegray2 / RAL 5008 gray-blue Mach. no.: 7138 Milling head type: 2013 Milling head number: 2013-2856 Guarantee: 6 months single shift from delivery, on the mechanics partially overhauled by us. Geometric acceptance with test report Accessories: - 3-A digital display Iaolhccjhqg Tloqmjt EASSON ES-8A, as good as new - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40, long version with tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Year of construction: 1976, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Ieled S Hztjhccqmjat Model: FP 3 year of construction: 1976 - overhauled, new painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue machine no.: 1601 Milling head type: 2027 Milling head number: 1483 with warranty geometric acceptance with test report accessories: - 3-A digital display FAGOR Innova 30i-M, new - fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Central lubrication, manually operated - coolant device - Operating instructions -used, as seen-

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis Ijlhccer En Dyoqmjat - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) stepless reconditioned with CE geometric acceptance with test report with guarantee Accessories: Ielhsvfdateccqmeat - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - central lubrication, manually operated - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons, potentiometer for feed control - new documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) reconditioned with CE geometric acceptance with test report with guarantee Accessories: Iaolsdvdczehccqmet - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: A (FP 1) reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet Ijlhccqedvdc Iemsat - CE declaration of conformity

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display Ijlhccqjd Tytyjmeat FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-