Universal Milling Machine

LUNAN X 8140 A

Condition: good (used), x-travel 300 mm y-travel 350 mm z-travel 350 mm taper in main spindle ISO 40 table surface area 625 x 380 mm T-slots 8 Stk. turning speeds 40.0 - 2.000 U/min transmission ratio 18 Stk. feed stepless 0 - 500 mm/min distance spindle nose and table min 50 / max 400 mm quill stroke 60.0 mm voltage 400 V total power requirement 5.1 kW weight of the machine ca. 800 kg range L-W-H 1400 x 1100 x 1700 mm from a training workshop (vocational school) Well maintained (!!) Ncodpfoxl E Stsx Ab Eep Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot angle/clamping table * Swiveling +/- 30 degrees - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 taper, quill stroke 100 mm, rated drive power approx. 3-4 kW, max. speed 2000 rpm, … Special accessories: Ncjdpfsddtwbsx Ab Esp - Multiplicator, gear ratio 1:4, ISO 40 taper Price: 499.00 EUR - Attachment for automatic feed device for vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR - Horizontal milling head, auxiliary head for vertical milling head with ISO 30 spindle taper, swivels 360 degrees Price: 585.00 EUR Plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Second-hand machine in good condition Ncodpjigv Ipjfx Ab Esp Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories - Central lubrication - coolant system - Operating instructions

Condition: used, Year of construction: 2009, x-travel 620 mm y-travel 420 mm z-travel 400 mm spindle taper ISO 40 DIN 69871A spindle turning speed range 50 - 4000 U/min table-size 800 x 400 mm Ncodpswplqmofx Ab Eop table load 400 kg feeds -stepless- max. 2000 mm/min rapid traverse 5 / 4 m/min power capacity - milling spindle (S1) 10,5 kW quill stroke 80 mm voltage 400 V total power requirement 17,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,00 x 2,76 x 2,05 m - .: 90458 - perfect condition from educational institution - Digital Read Out System Heidenhain ND780 - electronic hand wheel - mechanical hand wheels - hydr. tool clamping - cont. variable spindle speeds - cont. variable feed rates - horizontal milling spindle - drilling quill - Coolant equipment

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm Njdpfx Abeu T Navs Ejcp table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 2010, x-travel 400 mm y-travel 300 mm z-travel 400 mm total power requirement 3,6 kW weight of the machine ca. 1,3 t Nedpev T Np Nefx Ab Escp

Condition: good (used), Year of construction: 1989, Conventional Universal Milling Machine, travel X/Y/Z 400/300/400 mm, table size 320x750xmm, 18 speed 40-2000 rpm, motor 2,2 KW, spindle ISO 40, drilling quill 60 mm, tilting head +/- 90°, dimensions 1220x1810x1710 mm, ca. 2020 kgs; accessoires: horizontal milling device, shaping head Ncodsip N Rgjpfx Ab Eep

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Nedoxdltbopfx Ab Eecp Table load: 350 Spindle speeds: 2240Rpm Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, quill stroke: 50 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table width: 800 mm, table length: 360 mm, table load: 200 kg, overall weight: 1,600 kg, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), year of last overhaul: 2024, Ladies and Gentlemen, Ncodpfx Asrnnf Nob Ejp We are selling a Maho MH500M universal milling machine, which stands out due to its extremely simple and convenient operation. For example, all feeds can be infinitely adjusted by potentiometer. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. Availability: on request Working range X: 500 mm Working range Y: 380 mm Working range Z: 350 mm Speed range of the main spindle: 63 - 4,000 min/-1 Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table variant: rigid Table clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work lamp, electrical supports, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: used, x-travel 315 mm y-travel 180 mm z-travel 320 mm 5 14 mm ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min Ncjdpoxwdvhefx Ab Eop no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm - Robust/powerful universal milling machine - HEIDENHAIN digital display - Coolant device