Used Glob-Ram Rm914F Steel Shear for sale (21,457)

Condition: used, functionality: fully functional, Year of construction: 2004, Used Geka profile steel shear Type: HYD 110 SD Capacity: 100 tons 3-way punching head Djdpfx Afjyfmt Ts Doun Punching table is equipped with NC-controlled stop table 2 x 2 meter roller conveyors Year of manufacture: 2004

Condition: used, Used Silverson model GX20 stainless steel multi-purpose high shear mixer. Dusdpeygvkqsfx Af Djn - 4-blade mixer direct driven by a 15 kW, 2960 rpm, 50 Hz motor - has installed General Purpose Desintagration Head with inner diameter approx 118 mm (plus spare Emulsor Head)

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Duodpfswcqmaox Af Djn Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Dujdpfx Afsrxflce Don

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Duedpfx Afoxizanj Djn

Condition: used, functionality: fully functional, Year of construction: 2002, Pressure, tn: 50 Punching capacity: Ø40 mm. in 10 mm. Throat/reach: 250 mm. Flat bar: 300 x 15 mm. Round bar: Ø40 mm. Square bar: 40 x 40 mm. Angle iron: 120 x 120 x 10 mm. Notching unit: Triangular. Year: 2002 Country of origin: Spain. Size (L x W x H): 1900 x 1550 x 1750 mm. Weight: 1.400 kg. Djdpfsxyxtaox Af Doun With toolholder for no. 6 and no. 8-40 tools, triangular notching station and 1000 mm. electrical length stop. All our used machines are tested and serviced before delivery.

Condition: good (used), Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor Djdpoyay Eljfx Af Doun -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears Dujdpjyanqvsfx Af Djn -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Duodsyg En Sspfx Af Den

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Dodpfx Aoyg Enxsf Doun Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table Dedpfex Symnsx Af Dsun - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Duodsvg R Rzjpfx Af Djn Electric 380 volt

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with Dujdpfx Afogvkmno Dsn foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: used, Year of construction: 2005, round bar steel 32 / 17 mm square edge steel 30 x 18 mm L-beam 100 x 8 mm punching pressure 50 t weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Dsdpjwu Hkfsfx Af Doun Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm

Condition: used, Year of construction: 1991, round bar steel 35 mm square edge steel 32 mm L-beam 120 x 12 mm flat steel 400 x 16 / 200 x 20 mm punching pressure 60 t Dsdpfxjv Hti Ts Af Djun stroke 10 - 27,5 mm throat 410 mm punch diameter 27 in 17 mm total power requirement 7,5 kW weight of the machine ca. 2000 kg dimensions of the machine ca. 1800 x 800 x 1800 mm Equipment: - Notcher, hole punch, flat steel blade, angle steel blade - Stop table on hole punch + notcher - Contact stop 1000 mm - 2x foot switches - Operating instructions

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to Duedpfotxkn Uox Af Den -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch Dusdpfxef Ek H Ue Af Den -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching Duedpfx Afsx Dclbe Den -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg Dujdpoxabi Rjfx Af Djn dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Condition: new, pressure 60,0 t square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Dusdoxcuxqjpfx Af Den Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table Djdpfxexn Tyds Af Deun - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: Duedjxaat Uopfx Af Dsn - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: excellent (used), Year of construction: 2018, punching pressure 60.0 t punch diameter 28 in 15 mm punch diameter 38 in 11 mm adjustment of stroke 0 - 60.0 mm round bar steel 40.0 mm L-beam 120 x 12.0 mm square edge steel 35.0 mm shear: flat material 200 x 20 / 300 x 15 mm blade length 317 mm strokes per minute max. 25 work height max. 900 / 1130 mm oil volume 75.0 l voltage 400 V total power requirement 5.5 kW weight 1440 kg dimensions 1520 x 950 x 1780 mm From a maintenance workshop New price for basic machine including accessories ~ €17.000 Special price upon request - in checked conditions - machinevideo - ?v=KlpfYR1p9CI Equipment: - Electro-hydraulic profile steel shear Dujdpfx Afsxachhe Don - Punching station, flat steel shear, angle/profile steel shear, . notching station * Including special equipment: bending station - Heavy-duty and stable welded construction - Continuously adjustable stroke - Very compact design - Support table at notching and punching station - Side support/storage surfaces - 1x adjustable electrical contact length stop - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 1991, Hole punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm . Flat steel shears: 500 x 18 mm . Notching device with rectangular tool up to 13 mm . Djdjyfibgopfx Af Dsun Profile steel shears, L-steel, 90° mm . - Machine in good original condition!! approx. 70 sets of hole punching tools . .

Condition: excellent (used), Year of construction: 2017, 1 used hydraulic 5-station combined high-performance profile steel shear Technical Specifications: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm Ø 38 x 8 mm Throat depth: 175 mm Max. stroke: 50 mm Number of strokes: 20 / min Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notch tool size: 100 x 100 x 8 mm Flat Steel Shear Max. material width x thickness: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Mitre cut 45° (leg length x thickness): 80 x 10 mm Working height: 955 mm Djdpexz Dn Esfx Af Deun Bar Steel Shear Capacity round material: 30 mm Square material: 25 mm Angle Steel Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U/I-profile (accessory): 80 x 45 mm Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Motor power: 4 kW Machine dimensions: approx. 1500 x 950 x 1680 mm Machine weight: approx. 1400 kg Accessories / Special Features: • Punching station, flat steel shear, angle steel shear, profile steel shear, notching station • Stepless stroke adjustment • Heavy-duty and robust welded construction • Powerful 400 Volt motor • Jog mode • Triangle notching station / V-notch tool • With MUBEA holder for punch No. 1, No. 2 and No. 3 as well as die No. 30, No. 45 and No. 60; use of punch and die No. 4 and No. 80 possible as option • Punch holder with bayonet coupling • Advantages of punching over drilling: - Significant time savings – short cycle times - No chips - No coolant required • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel