Used Glob-Ram Rm979F Steel Shear for sale (34,473)

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Click on the link below to see a video of the machine running. Tjdpfx Agsxyxl Aj Ijf

Condition: ready for operation (used), puncher 50.0 t Todpfxjxz Hhuo Ag Ief square edge steel 40.0 x 40.0 mm round bar steel 40.0 mm L-beam 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.) Ø 28.0 x 13.0 mm shear: flat material 300 x 15 / 200 x 20 mm throat 250 mm work stroke 60.0 mm work height max. 1085 mm total power requirement 4.0 kW weight 1320 kg range L-W-H 1600 x 800 x 1680 mm Current new price approx. 20.000 euros Special price on request Equipment: - Electro-hydraulic section steel shears with 4x work stations * Flat steel shears * Section steel shears * Hole punch * Notching station - Driven by two hydraulic cylinders - Stepless stroke adjustment - Support table at hole punching & notching station - Material scraper - Side storage options - 2x freely movable foot switches - Various punches + dies (see image 9) - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 2017, 1 used hydraulic 5-in-1 combined high-performance steel section shear Technical Specifications: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm Ø 38 x 8 mm Throat depth: 175 mm Max. stroke length: 50 mm Strokes per minute: 20 / min Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notching tools (accessory): 100 x 100 x 8 mm Flat Bar Shear Max. material width x thickness: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Angle cut 45° leg length x thickness: 80 x 10 mm Working height: 955 mm Round Bar Shear Capacity round stock: 30 mm Square stock: 25 mm Angle Iron Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U/I-profile (accessory): 80 x 45 mm Todexz Dn Eopfx Ag Isf Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Drive motor power: 4 kW Machine dimensions: approx. 1500 x 950 x 1680 mm Machine weight: approx. 1400 kg Accessories / Special Features: • Punch station, flat bar shear, angle shear, section shear, notching station • Equipped with two work cylinders and two foot pedals for simultaneous operation of punch station and section shear • Infinitely adjustable stroke length • Heavy, rigid welded construction • Powerful 400 Volt motor • Two-stage foot pedal for jog mode • MUBEA toolholder for punch No. 1, No. 2, and No. 3, as well as die No. 30, No. 45, and No. 60; use of punch and die No. 4 and No. 80 optional • Quick-release bayonet punch holder • Advantages of punching compared to drilling: - Significant time savings, short cycle times - No chips - No cooling required • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, Year of construction: 2002, Pressure, tn: 50 Punching capacity: Ø40 mm. in 10 mm. Throat/reach: 250 mm. Flat bar: 300 x 15 mm. Round bar: Ø40 mm. Square bar: 40 x 40 mm. Angle iron: 120 x 120 x 10 mm. Notching unit: Triangular. Year: 2002 Country of origin: Spain. Size (L x W x H): 1900 x 1550 x 1750 mm. Weight: 1.400 kg. Tjdpfx Agexyxtae Ief With triangular notching station and 1000 mm. electrical length stop. All our used machines are tested and serviced before delivery.

Condition: new, Year of construction: 2024, 5 workstations for flat material, angle steel, bar steel, punch or notching, and bending station. Tjdpfx Agjxyyyzj Isf Punch with quick-change punch device Notching station with support table Flat steel shear Profile steel shear for angles and bar steel Bending station Electric limit stop Technical data Strokes per minute with 15mm stroke: 32/min. Punching force: 600 kN Throat depth: 250/500 mm Hole diameter/thickness up to max. Ø 40×11 Flat steel (2 tilt) up to max. 350×15 mm Flat steel (5 tilt) up to max. 350×15 mm Angle steel 90 degrees up to max. 120x120x10 mm Bar steel up to max. 45 mm Square steel up to max. 40 mm Notching up to max. 10 mm Bending capacity: up to max. 150×10 mm Motor power: 5.5 kW Weight Bendicrop 60SD – 2,012 kg

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Equipment - Flat, profile, and bar steel shear - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device Tsdorknnfjpfx Ag Ijf - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: used, Used Silverson model GX20 stainless steel multi-purpose high shear mixer. - 4-blade mixer direct driven by a 15 kW, 2960 rpm, 50 Hz motor - has installed General Purpose Disintegration Head with inner diameter approximately 118 mm (plus spare Emulsor Head) Tedpfxoxt Eh De Ag Isf

Condition: used, Year of construction: 2005, round bar steel 32 / 17 mm square edge steel 30 x 18 mm L-beam 100 x 8 mm punching pressure 50 t weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Tjdpfx Aowu Hkfsg Isf Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 40 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: Tsdpfx Ageu Icl Rs Ief -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: used, functionality: fully functional, Year of construction: 2007, Pressure, tn: 50 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 177 mm. Flat bar: 350 x 15 mm. Round bar: Ø35 mm. Square bar: 30 x 30 mm. Tsdpfx Agoxxkiqs Ief Angle iron: 80 x 80 x 8 mm. Notching unit: Square. Flatbar bender: 100 x 10 mm. Year: 2007 Country of origin: Spain. Size (L x W x H): 1900 x 1300 x 1750 mm. Weight: 1.000 kg. With 1000 x 10 mm. flatbar bending station, sqaure notching station and 1000 mm. electrical length stop. Machine uses tool size 6. All our machines are tested and serviced before delivery.

Condition: new, Year of construction: 2024, The machine has 5 workstations: Tsdpfx Aexyyyusg Iof • Punching station • Flat bar shear • Angle bar shear • Notching station • Bar steel shear (round and square) Technical data Strokes per minute with 20 mm stroke: 40 /min Throat depth 500 mm Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Technical Data: Tedpfx Aoxupvbeg Ief - Sheet and flat bar shear, blade length: 175 mm - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm - Punching station: - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - Various punch and die sets included

Condition: excellent (used), Year of construction: 2007, Equipment: CE marking, Punching Power 165 Ton Maximum capacity Ø 40 x 30 mm Ø 34 × 34 mm Shearing of Angles at 90º 205 x 205 x 18mm Shearing of Flat Bars 750 x 20 mm 400 x 30 mm Shearing of Round Bars 60 mm Shearing of Square Bars 60 mm Rectangular Notching 90 x 58 x 16 mm Todpfx Agewbu Tnj Ief Feel free to ask more information

Condition: used, Year of construction: 1991, round bar steel 35 mm square edge steel 32 mm Tjdpfx Aev Hti Tog Ijf L-beam 120 x 12 mm flat steel 400 x 16 / 200 x 20 mm punching pressure 60 t stroke 10 - 27,5 mm throat 410 mm punch diameter 27 in 17 mm total power requirement 7,5 kW weight of the machine ca. 2000 kg dimensions of the machine ca. 1800 x 800 x 1800 mm Equipment: - Notcher, hole punch, flat steel blade, angle steel blade - Stop table on hole punch + notcher - Contact stop 1000 mm - 2x foot switches - Operating instructions

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 60 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to Tedou Icmhopfx Ag Ief -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, functionality: fully functional, Year of construction: 2007, Pressure, tn: 50 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 177 mm. Flat bar: 350 x 15 mm. Round bar: Ø35 mm. Square bar: 30 x 30 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Flatbar bender: 100 x 10 mm. Year: 2007 Country of origin: Spain. Tjdpfxexvq Uns Ag Ief Size (L x W x H): 1900 x 1300 x 1750 mm. Weight: 1.000 kg. With 1000 x 10 mm. flatbar bending station, triangular notching station, 1000 mm. manual length stop and misc. used punching tools. Machine uses tool size 6. All our machines are tested and serviced before delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Punching Capacity 22dia x 15mm Tjdpfx Asxawbiog Iof Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Nitching 8mm Thickness Punch Pressure 45T Standard Size Fitment Punch & Die 18mm *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Cost: £5,750.00 + VAT

Condition: used, functionality: fully functional, operating hours: 1,249 h, Peddinghaus 210A/13 combined section steel shear with punch, flat bar shear, rod shear, profile shear, and notching device. Equipped with infeed and outfeed conveyor. Tsdpfx Ajxqph Nog Iof Bending capacity: 42 mm Punching capacity: 16 mm Motor power: 3 kW Round steel max: 25 mm Square steel max: 38 mm

Year of construction: 2000, condition: used, Muhr and Bender KLS 1100 Punching capacity 110 clay Diameter x sheet thickness Ø 40 in 22 mm throat 500 mm Max. hole diameter 80 mm Tsdpfx Ajlzc Dceg Ief Maximum cutout thickness 22 mm Knife length 500 mm Max material thickness by notching 16 mm Motor power 8 kW Weight 5500 kg

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF) Tjdpfxsxn Tyde Ag Ijf

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine xH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) * Tjdsxcay Hjpfx Ag Ijf

Condition: like new (used), functionality: fully functional, Year of construction: 2024, actuation type: hydraulic, throat depth: 175 mm, punching force: 45 t, punching diameter: 28 mm, overall weight: 800 kg, Equipment: CE marking, Condition: demo Pressure, tn: 45 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 175 mm. Flat bar: 300 x 10 /200 x 13 mm. Round bar: Ø30 mm. Square bar: 25 x 25 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Year: 2024 Country of origin: Spain. Size (L x W x H): 1360 x 1100 x 1500 mm. Weight: 800 kg. Todpfx Agexn Sque Isf Delivered with punching table, notching table and 10 sets of round punches and dies tool no. 6 (Ø4-Ø28 mm.). Has only been used for display. Machine uses Geka tools size no. 6.

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm Tsdpfx Agexabi Rs Isf round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm Tjdpewp Edaofx Ag Ijf square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: new, pressure 60,0 t square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 Tedoxcuxqspfx Ag Iof work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder