Used Saws (window production) for sale (103)

Year of construction: 1997, Condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and degree display Dobvsn Hbmqecwzzokl Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 2020, Condition: as good as new (ex-display), Elumatec TS161-21 table saw: - Precise work due to saw cut from below - Large swivel range up to 45° to the left and up to 0° to the right The special swivel mechanism with integrated rotary table allows working from the front at all angle settings - A workpiece fence that can be moved to the rear enables optimum utilization of the saw blade capacity for wide and flat profiles - Manual saw feed - Saw blade and base included as standard - Pneumatic material clamping device (vertical) - Dosing spray device Djbvcwzom Hav Uszekl - Maintenance unit Elumatec AMS E355 processing length: 6m - For exact cutting to length of PCV and aluminum profiles - For attachment to all single head saws - Patented rail and carriage system - Length: 6000mm - With automatic cutting length adjustment Technical data E355: - Drive independent absolute measuring system - positioning accuracy + / -0,1mm - Pneumatic blocking on position - memory for 999 data sets - correction values for profiles - Interface RS232

Condition: refurbished (used), Year of construction: 2009, Functionality: fully functional, Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling and lubrication system - hydraulic feed brake Dkobvjvzqg Secwzzjl - pneumatic profile clamps - tilt angle adjustment crank

Condition: ready for operation (used), Bench drilling machine Wotan Rapid with control Heidenhain 315 Year : No type plate available, work spindle diameter 130 mm Debvsvg E Ubjcwzzekl Tool holder: SK50 External centering 128 , 57 mm ISO 50 Speed range 25 - 1250 rpm. Speed steps 18 Y-axis 800 mm , X-axis 800 mm , W-axis 800 mm , Clamping surface 800 x 800 mm Table swivel range 360 ° Table indexing position 4 x 90 ° Feed range 1 - 2000 mm/min Manual / automatic tool change for 32 tools The machine is located in Bremen and can be inspected. _____ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty.

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, AVAILABLE IMMEDIATELY CNC-controlled two-head double mitre circular saw for the efficient cutting of profiles made of aluminum, non-ferrous metals and various plastics. The machine can be used for single cuts - to saw the profile with two saw heads at the same time - or in automatic mode - here the two-head saw becomes a single-head sawing machine Pneumatic miter adjustment of the saw heads to preset stops, miter angle continuously programmable between 22.5° - 135° (left saw head) and 135°-22.5° (right saw head) Saw blade drive power 2 x 2.2 kW Saw blade diameter Ø 550 mm Largest cutting length - sawing with both saw heads at the same time 5,015 mm Smallest cutting length - sawing with both saw heads at the same time 380 mm Largest / smallest cutting length in automatic mode unlimited (the profile is pushed and pulled) Length of the moving roller conveyor 2,300 mm Maximum space requirement - approx. 8.2 m (saw unit on the far right x 1.85 m x H 1.4 m Weight approx. 1,200 kg - CNC control with touch screen, Dksbvevv Nbqscwzzsl with the option for quick input of values - Simple and quick creation of cutting lists - Control panel can be moved on linear guides - Linear guides for moving the right saw unit - Automatic spray lubrication

Year of construction: 2024, Condition: used, cutting width 180 mm Cutting height Ø140 mm Motor output 2,2 kW Cutting height at 45° Ø120 mm Dkobvcwzsvnwfuszel Dimensions (L/W/H) 700x950x1750 mm machine weight ab. 180 kg

Condition: used, Max. saw blade diameter: 400 mm Pneumatic material clamp Dobvcwjup D Izezzekl Manual feed

Year of construction: 2020, Condition: as good as new (ex-display), Automatic CNC cutting centre Cutting range from 22.5° to 157.5° with all intermediate angles Dobvcwzsvi Ivtszjkl Motorized positioning of gripper in Y and Z Automatic loading table Automatic unloading table piece 90° overturn device in loading phase Labelprinter max lenght profile: 7500 mm Diameter sawblade 550 mm

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display. Djbvcjvtarnowzzekl

Year of construction: 2021, Condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock Dksbvehrukiscwzzol - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 2009, Condition: used, Functionality: fully functional, machine/vehicle number: C108744, Dear Sir or Madam, for sale we have 1 working automatic saw for cutting aluminum profiles Vegamatic Pusher. The saw is still connected for testing at the TECH3 location, Lesarska cesta 8, 3331 Nazarje Djbjvmf Eyovcwzzekl In addition to the machine, the Emmegi aspiratore M64 suction unit can also be purchased, price negotiable.

Condition: excellent (used), Year of construction: 1999, Table saw Elumatec TS 161 Saw blade diameter 280 mm Djbvoui Iuwecwzzekl Saw blade speed 3,200 1/min. Electrical connection 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg

Condition: used, Max. saw blade diameter: 370 mm Dkebsup D H Rovcwzzjl

Year of construction: 2021, Condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps Dkobvcwehrumaozzel - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 1999, Condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Djbvcwsucpqtozzekl Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: used, Max. saw blade diameter: 500 mm Continuously adjustable hydropneumatic saw blade feed Pneumatic material clamps Dkobvcwzeunyvlezel Weight: approx. 450 kg

Year of construction: 1997, Condition: excellent (used), Manual length adjustment via hand slide Debvcot Ua Nfjwzzekl For attachment to any Elumatec single-head saw (right) Max. Feed length: 1500 mm

Year of construction: 1997, Condition: used, Max. Saw blade diameter: 450 mm mass: about 700 kg Saw blade diameter: 450 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum quantity spray device Table can be rotated on both sides with locking points at 45° Djbvcwzehxzlbszokl Weight: approx. 650 kg

Condition: excellent (used), Miter circular saw make KALTENBACH type TL 250 for aluminum and plastic profiles Saw blade diameter 250 mm Dkjbvcwzsmrq Evozsl

Year of construction: 1994, Condition: used, Max. saw blade diameter: 350 mm Manual material tensioner minimum quantity spraying Digital angle display Dkebvcsud Uvkjwzzsl

Year of construction: 1998, Condition: used, Max. saw blade diameter: 500 mm Djbvcouaq Axswzzekl Max. cutting length: 5100 mm Automatic length and angle adjustment between 45° and 90° via E 190 control Additional roller conveyor Weight: approx. 1400 kg

Year of construction: 1992, Condition: used, Max. saw blade diameter: 350 mm Manual material tensioner Dkjbvcwjtvhu Ajzzol

Year of construction: 1996, Condition: used, Manual length adjustment via hand slide Debjtunbfevcwzzokl For attachment to any Elumatec single-head saw (right) Max. feed length: 6,000 mm

Year of construction: 1996, Condition: used, Max. feed length: 7200 mm The material stop can be folded up pneumatically to insert the profile Installation on the right Weight: approx. 700 kg Dkoboq Rhd Rsvcwzzjl

Year of construction: 2017, Condition: used, Pneumatic material feed Feed length: 800 mm (multiple strokes possible, max. 2,400 mm) Max. saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spray device Piece counter with automatic switch-off Weight: 600kg Dsbvcjkrgiuewzzokl