Year of construction: 2018, condition: used, functionality: fully functional, Desoutter ECSF4 + CVIC II-H2 – 12 Complete Screwdriving Systems For sale: 12 complete Desoutter industrial electric screwdriving systems, consisting of CVIC II-H2 controllers and ECSF4 electric screwdrivers. The equipment comes from a single industrial installation. All units have been kept as complete controller + screwdriver pairs. Scope of supply: 12 × Desoutter CVIC II-H2 controllers 12 × Desoutter ECSF4 electric screwdrivers 6 × screwdrivers in a straight configuration 6 × screwdrivers with additional/special head attachments 12 × additional screwdriver attachments Original connection cables Ibjdpfx Adjzw U Rps Nec Additional mounting parts and accessories as shown in the photos Technical information: Manufacturer: Desoutter Industrial Tools Controller: CVIC II-H2 Screwdriver: ECSF4 Maximum torque: 4 Nm Programmable tightening parameters Torque and angle control Integrated cycle counter Designed for professional assembly stations and automated production applications Condition & Cycle Count All units have been powered on and tested. The systems have similar usage, with approximately 2.3 million tightening cycles per system. Cycle counts have been checked directly in both the controller and screwdriver memory. Example from one system: Controller: 2,319,594 cycles Screwdriver: 2,319,700 cycles The very similar controller and screwdriver cycle counts indicate that the units have been operated together as matched systems. Exact cycle counts for individual units can be provided upon request. The equipment is in good used industrial condition, with normal signs of use. Please refer to the photos for the exact condition and included accessories. Sale of the complete lot of 12 systems is preferred, but smaller quantities may also be available upon request. European and international shipping can be arranged. Additional photos, serial numbers, individual cycle counts and videos showing the equipment in operation are available upon request.

Condition: excellent (used), ///// PRICE INDICATED IS FOR 1 UNIT ///// For sale: a professional Bosch Rexroth industrial screwdriver designed for use in production lines and assembly stations. The device is characterized by high precision, durability, and the ability to operate continuously in industrial environments (automotive, mass production). The item is used. It shows normal signs of use but is in good technical condition. ⚙️ Available models (to choose from) 🔹 Rexroth ESA075G-G Iedpsz Smk Refx Ad Nsbc Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESV073-G Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Country of manufacture: Germany 🔹 Rexroth ESA150S-G Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESA013G-G Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common parameters Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Manufacturer: Bosch Rexroth 📦 Included in the set ✔️ 1x screwdriver (selected model) ✔️ head (as shown in the picture – straight or angled) 📊 Condition Used – normal signs of use. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry mass production precise tightening

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger Iodpfx Aez Slm Red Njbc • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Iedpfsz Smyrex Ad Nobc Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Ibsdoz Slplopfx Ad Noc Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: excellent (used), For sale: a professional, battery-powered hydraulic crimping tool from Cembre, model B15MD. The device is in perfect working order and ready for use. Sold without battery and charger. Excellent cosmetic condition, with normal signs of use visible in the photos. The set includes the original Cembre transport case and the items shown in the photos. Technical data: Manufacturer: Cembre Isdpfx Aoz Sm D Djd Nsbc Model: B15MD Crimping force: 15 kN Power supply: 18V battery Made in Italy Compact and lightweight design Professional tool for crimping terminals and connectors Included in the set: Cembre B15MD crimping tool Original transport case Accessories shown in the photos NOTE: Sold without battery and charger. The device has been tested and is functioning at 100%.

Condition: excellent (used), Offering a professional CEMBRE B35-50D battery hydraulic crimping tool – a high-quality tool for industrial applications. The device is in very good technical condition, fully operational, and ready for work. ⚙️ Technical specifications: Model: CEMBRE B35-50D Crimping force: 35 kN (4 tons) Max cable cross-section: up to 150 mm² (copper) Power supply: 9.6V Ni-MH battery Rotating head: 180° Type: hydraulic, battery-powered Operation: one-handed ✅ Applications: cable lugs cable connectors LV electrical / industrial installations service and maintenance 📦 Set includes: CEMBRE B35-50D crimping tool 2x batteries charger carrying case documentation / manual shoulder strap ⭐ Advantages: Iodpfx Aoz Smyxjd Njbc Very robust industrial construction Quiet operation and minimal vibrations automatic return after crimping high precision and repeatability convenient one-handed operation 📌 Condition: Used – shows normal signs of use, fully operational technically.

Condition: good (used), Year of construction: 2005, Collomix Rota 30 Paint Mixer The Collomix Rota 30 is a high-performance biaxial mixer specifically designed for the fast and efficient mixing of paints, varnishes, and plasters in closed containers. It features a biaxial mixing process in which the container rotates simultaneously around two axes, enabling mixing times of less than 90 seconds, even with heavy materials. Features and Ergonomics Automatic clamping: After insertion, the mixing container is automatically fixed and centered. Safety features: Integrated safety door lock and an emergency stop button; the door only opens after the mixing unit has come to a standstill. Handling: Equipped with extendable rollers and height-adjustable machine feet for easy positioning. Durability: An integrated "splash guard" mechanism protects the drive components from contamination by leaking paints. Application areas The device is primarily used in the paint wholesale and retail trade, as well as in the chemical industry. It is often used as a system component in paint dispensing systems to mix color pigments into base paints without clumping. Collomix Rota 30 Paint Mixer For mixing: Paints Paint granules Facade paints Industrial paints Plasters Other low-viscosity materials Ijdpfxoy Nxh Ej Ad Njbc Max. mixing weight: 35 kg Recommended continuous mixing weight: 30 kg Max. container height: 60-400 mm Year of manufacture: 2005 More paint mixers in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), For sale: professional, battery-powered hydraulic crimping tool, Cembre brand, model B15D. The devices are in perfect working order and ready for use. The price is for one unit. Ibodpfxjz Sm Ebs Ad Nsc The visual condition is as shown in the photos – normal signs of wear and tear from use. Technical specifications: Manufacturer: Cembre Model: B15D Crimping force: 15 kN Power supply: 9.6V / 2.0Ah Ni-MH Professional tool for crimping terminals and connectors Compact and robust design Additional information: Batteries have been refurbished – expiry date 05.2026 Charger not included Crimping tools are 100% functional Sold individually Included in the set: Cembre B15D crimping tool Battery

Condition: used, machine/vehicle number: 337512, For sale: an AEG mirror welding machine with 1010 watts. Ibodpfsz Rqafjx Ad Nsc

Condition: excellent (used), Electric, handheld nibbler TruTool PN 200 Product features The new TruTool PN 200 oscillating shear is primarily used for cutting C-L-U profiles, trapezoidal sheet metal, and other similar elements. The device features a short tool for processing sheet metal with a profile depth of up to 85 mm, as well as C-L-U profiles. Also suitable for corrugated sheets. Ideal for hard-to-reach places. The working direction can be easily adjusted by 360° in 45-degree increments without the need for tools. Minimum changeover time: Punch and die can be replaced quickly and easily, without interruptions and without tools. Unmatched speed: Fast and efficient, 2.1 meters per minute for structural steel with a strength of 400 N/mm². Applications: Trapezoidal sheet metal For cutting profiles with a depth of up to 86 mm and a width of 132.5 / 40 mm. For straight and angled cuts. Profiles For cutting C-L-U profiles. Corrugated sheet metal For trimming and cutting. For angled cuts, as well as internal and radial cutouts. • MAXIMUM SHEET THICKNESS: • MAXIMUM SHEET THICKNESS FOR STEEL 400 N/MM²: 2 mm • MAXIMUM SHEET THICKNESS FOR STEEL 600 N/MM²: 1.5 mm • MAXIMUM SHEET THICKNESS FOR STEEL 800 N/MM²: 1 mm Iedpfsz Sb Hmsx Ad Nobc • MAXIMUM SHEET THICKNESS FOR ALUMINUM UP TO 250 N/MM²: 3 mm • RADIUS: • SMALLEST RADIUS: 50 mm • GENERAL INFORMATION: • WORKING SPEED: 2.1 m/min • NUMBER OF STROKES AT NOMINAL LOAD: 1500 1/min • STARTING HOLE DIAMETER: 24 mm • RATED POWER INPUT: 550 W

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CR690, overall weight: 1,350 kg, load capacity: 100,000 kg, Electric Chassis System Robot 100 Ton Set – OX TBC 100 The self-propelled trolleys offer a high load capacity of 100 tons and a very low height, with the ability to rotate 360°, making it possible to position them under all types of loads and for maneuvering. Motor-driven trolley models with hydraulic lifting cylinders are also available for loading onto vehicles or shelves, offering a speed of up to 5 m/min max. Length - 1602 mm Width - 2019 mm Height - 315 mm Max. load/lifting capacity - 100 tons Ijdpow Taikofx Ad Njbc Remote control

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Output: Hex 1/4F" Torque: Min.: 1.0 Nm Max.: 4.0 Nm Idle speed: 2000 rpm Weight: 0.6kg Iodpovxu Dvofx Ad Nsbc

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 Ibjdpevxux Hefx Ad Njc IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2011, condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable fully functional Ibedpfevtf R Asx Ad Nec without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Output: Hex 1/4F" Torque: Min.: 1.5 Nm Max.: 12 Nm Idle speed: 950 rpm Weight: 0.7kg

Year of construction: 2009, condition: good (used), Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L Ijdpfxjx R Svlo Ad Nsbc -Current: 3x25A PE -Voltage: 415V -Protection class: IP65 -Cable: not included -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Ibedpfx Adsvtf Aro Njc Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Ibodpfxov Tbh Rj Ad Nec No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Ijdjzd S Ryspfx Ad Njbc Welding process MIG/MAG (gas-shielded welding) Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Year of construction: 2019, condition: as good as new (ex-display), Used Machine Year of Manufacture: 2019 Condition: Display model, like new Features and Technical Specifications: - Battery voltage: 18 V - Saw blade diameter: 160 mm Ibedpfxezrpxwj Ad Noc - Bore: 20 mm - Cutting depth: up to 57 mm at 90° up to 40.5 mm at 45° - Tilt range: -1° to 48° - No-load speed: 4,850 rpm - Dust extraction port - Weight: approx. 4.5 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01013115, overall weight: 15 kg, color: green, output voltage: 250 V, type of output current: DC, number of cylinders: 24, ambient temperature (min.): 18 °C, ambient temperature (max.): 65 °C, The MIC950 version C is a state-of-the-art ignition controller designed to optimize the performance of Jenbacher gas engines in the most demanding industrial applications. Thanks to its advanced architecture, this unit ensures precise ignition control, improving energy efficiency and reducing emissions. Additional uncategorized technical details: Minimum input voltage: 18 V DC Ibodpfowtmltsx Ad Nec Maximum input voltage: 32 V DC Nominal power: 24 V nom. Output voltage: 250 V DC Minimum temperature: -13°F Maximum temperature: +149°F Compatibility: Jenbacher series 2, 3, 4, and 6 Availability: 173 units in stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Iedsv Tbz Depfx Ad Nobc Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2016, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659480, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLBN120-L550-S4Q switch-off with lever start Idle speed: 410 / 550 min-1 Torque range: 4.0 to 12 Nm Output: 1/4" Length: 301 mm Ibjdpfx Adov Ipt Re Nsc Weight without battery: 1.25 kg Other tools for industrial production and maintenance on request.

Year of construction: 2014, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151654200, From our demonstration tool inventory, tested and fully functional: Desoutter E-Lit Premium elektric pistol screwdriver ELS6-1000P without battery Ibsdsv Ipclspfx Ad Noc with speed adjustment (via optional module) Idle speed: 300 to 1000 min-1 Torque range: 0.8 to 6 Nm / 7.1 - 53 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Condition: excellent (used), For sale is a high-quality Milwaukee M18 F2SSBL FUEL cordless snow blower, offered as a showroom model in excellent condition. Iedjyvhqispfx Ad Njbc - The unit was used for in-store display only – no heavy winter operation! - Important: Delivery does NOT include battery or charger (ideal for those already using the Milwaukee M18 system) Highlights: - Powerful brushless POWERSTATE™ motor - Part of the Milwaukee M18 FUEL system (100% compatible) - Clearing width approx. 53 cm – ideal for sidewalks and driveways - Clearing height approx. 30 cm – suitable for deep snow - Throwing distance up to approx. 10 m - Adjustable discharge chute for maximum control - LED headlight for perfect visibility in the dark - Clog-resistant design – no need for tedious post-cleaning - Space-saving vertical storage Advantages: - Quieter and lower maintenance than petrol snow blowers - Zero emissions during operation - Instant full power – no starting procedure like with petrol engines - Perfect for homeowners, janitors & commercial use Scope of delivery: - Milwaukee M18 F2SSBL snow blower - WITHOUT battery & charger - Original packaging The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Freight shipment: Austria: €60.00 incl. VAT Germany: €90.00 incl. VAT Related keywords: snow blower, cordless snow blower, Milwaukee M18, snow remover, snow thrower, winter service, driveway clearing, sidewalk snow, janitor equipment, professional snow blower