Used Milling machines - univ.conv. 0-399mm X-axis travel for sale (69)

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m Bwsln Uikovylkcs Uol technical data please see attachment!

Year of construction: 1969, Condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: Bwjln Uikjl Dx I So Usl - collets - rotary table - vice - Counterholder H. Milling

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm Beljvxllkon Uik Uswl total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine dealer with own stock of 1600 m².

Condition: used, Technical details: x-travel: 200 mm y-travel: 450 mm z-travel: 460 mm control: Siemens 802S base line spindle taper ISO: ER 32 spindle head swivable left - right: nein ° turning speed range: 150 - 8600 U/min feed:: X/Y/Z: 2000 - stufenlos mm/min table surface area: 750 x 210 mm interface: 232 total power requirement: 3 kVA weight approx.: 760 kg dimension machine xH: 1,9 x 1,2 x 2,1 m Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control unit Bwsln Uou Ndcajik Uol cooling system central lubrication machine interior lighting Machine feet *

Condition: used, Year of construction: 2020, Functionality: fully functional, Nimac Atlas beamsaw 4300 x 4300 Cutting height 95mm Year 2020 Side Aligner Windows PC Bwslnsv Ibzms Uik Usl Label printer Optimisation software 4 air tables 9 grippers Available September 2025

Condition: good (used), Manufacturer: WMW VEB Tip: FW 200×630 x-y-z: 380 - 140 - 230 mm. Bwolnjik Hcuj Uik Ujl Table size: 200x630mm

Condition: excellent (used), Functionality: fully functional, From Swabia for model makers and professional hobbyists Bsln Uijvyk H Nsk Uowl a beautiful machine with reasonable travel paths and with swivel and tilting table, 400 V, connected load 2.2 kW Travel paths: in X 280 mm in Y 170 mm in Z 250 mm ISO 30 mount. Table surface 680 x 180 mm Dimensions, W x D x H: 1 x 0.8 x 1.5 m Weight approx. 0.7 ton . Equipment: • Universal swivel and tilting table • 2 speed ranges, continuously adjustable, 150 - 2000 rpm • Feed in X-axis continuously adjustable, 15 - 250 mm/min • Coolant system • Right and left rotation

Condition: new, Bernardo drilling and milling machine FM 50 HSV incl. 3-axis digital display drilling capacity in steel 32 mm drilling capacity in cast iron 40 mm cutter head milling cutter max. 80 mm throat 220 mm spindle speed (12) 75 - 3200 rpm spindle mounting MK 4 quill stroke 120 mm spindle sleeve feed (3) 0.10 / 0.18 / 0.26 mm/rev. table size 800 x 240 mm Bweln Usd Du Tfoik Uel travel (x / y) 555 / 225 mm milling head tiltable -60° to +60° distance spindle / table 95 - 485 mm height adjustment milling head 390 mm T-slot size 14 mm Lift motor 90 W Motor output power S1 100% 1.1 / 1.5 kW (400 V) Motor input power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)* 1140 x 970 x 1460 mm Weight approx. 322 kg Scope of delivery - 3-axis digital display i200 with LCD display - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - tightening spindle M 16 - Reducing sleeve MK 4 / 3 - Combination arbor MK 4 / 27 mm - Height adjustable protective cover - Automatic quill feed - Lift motor for milling head - LED machine light - Digital quill stroke display - Thread cutting device - Blade protection cover - Longitudinal measuring scale - Operating tool

Condition: used, Year of construction: 1990, Year ca 1990 fabric-no. 42965 Beln Uovu Hi Ajik Uowl x-travel 500 mm y-travel 400 mm quill stroke 300 mm weight 3,8 t

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. Bwjlju Ndb Aon Uik Uel The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: excellent (used), quill stroke: 80 mm, Milling machine Make Korradi Type UW 003 Spindle Spindle SK 40 Bsln Uisqfc R Ejk Uswl Table size 800 x 350 mm X path 600 mm Y path 400 mm Z path 400 mm 12 spindle speeds from 30 - 1800 na/min. Digital readout lengthwise and crosswise 18 feed steps from 6 - 270 mm/min. Vertical swivel head Quill stroke 80 mm Transport dimension : Width 1400 mm Length 1500 mm Height 1900 mm Weight 1960 kg

Condition: used, Year of construction: 1986, 3-axis milling machine X-axis displacement ----- 300 mm Y-axis displacement ----- 110 mm Z-axis displacement ----- 210 mm Milling table ----- 480 x 125 mm Spindle drive ----- ISO30 Spindle speed ----- 100 - 4000 rpm Weight ----- 750 kg Dimensions ----- 1550 x 1150 x 1700 mm Bwsln Uijivg Sask Uol

Condition: good (used), Technical data for type UW 10 Bjln Uovv Nk Ejik Uswl . ISO 40 mount Quill stroke 60 mm Table surface 600 x 250 mm Speeds 45 - 1950 rpm Feeds 10 - 470 mm/min...continuously...adjustable... . Travel paths with feed approx.: Longitudinal travel (X) 315 mm Cross travel (Y) 180 mm Vertical travel (Z) 320 mm . .

Condition: new, Bernardo Bohr - and milling machine KF 60 incl. 3-axis digital display and y-feed Technical specifications Drilling capacity in steel 35 mm Drilling capacity in cast 40 mm Threading up to M 16 Projection 210-550 mm Spindle head pivot range 90 ° Spindle speed (8) 115-1750 U/min ISO 40 spindle adaptor Quill stroke 125 mm Table size 800 x 240 mm T - slot size 16 mm Swivel table 45 ° to + 45 ° Distance from spindle / table 120-375 mm Boln Uisd Du Tljk Uowl Travel longitudinal (x) 375 mm Stroke transverse (y) 175 mm Travel vertical (z) 255 mm S1 motor power output 100% 0.85 / 1.5 kW motor power input S6 40% 1,1 / 2,2 kW Machine dimensions (W x D x H) 1300 x 1400 x 2100 mm Weight approx. 750 kg package • 3-axis digital display i200 with LCD display • Tightening spindle M 16 • LED machine luminaires • Coolant system • Adapter ISO 40/MK 3 • Adapter ISO 40/B18 • Reducing bushing MK 3/2 • Height-adjustable guard • Automatic platen feed x axis • automatic platen feed in Y-axis

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen - Bsln Uechfyfoik Uowl

Condition: used, Year of construction: 1986, Technical details: x-travel: 1120 mm y-travel: 345 mm z-travel: 400 mm spindle taper ISO: SK50 spindle head swivable left - right: 90° ° Distance rear edge of table to column guideway: min./max.: 125 / 470 mm max. torque on the spindle: 280 kpm range of revolution per miute: 28 - 1400 / 18step U/min feed:: X/Y: 16 - 800 und Z: 5 - 250 mm/min Table dimensions: 1600 x 460 mm table surface area: 1400 x 330 mm table load: 1,5 t total power requirement: 14,5 kW machine weight approx.: 3900 kg dimension machine xH: 2,7 x 2,0 x 2,1 m dimensions electric cabinet: 0,47 x 0,8 x 1,5 m Equipment: 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet 2x cranks (for machine table and for vice) * Bwslnou Iy Hls Uik Uol

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW Bwjln Uikeflrg Tj Usl space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Bwoln Uievt Tn Ajk Usl Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 Bjljua E Naon Uik Uswl voltage: 380/400 V

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Max. table load table load 50 kg (rigid angle table) Beljdtm Ahon Uik Ujwl Speed range 80 - 2200 rpm Power 1,4 kW Tool holder SK30 DIN2080

Condition: used, x-travel:305 mm y-travel:110 mm Bwoln Usqxd N Rsik Uol z-travel:287 mm table-size:650 x 190 mm spindle taper:MK 3 spindle turning speed range:100-1300 U/min weight of the machine ca.:1000 kg

Condition: used, Travel path of the axles: X: 300mm Bjlneq Awhfe Uik Ujwl Y: 350mm Z: 200mm Weight: approx. 800 kg

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 34338 Year of construction approx. 1965 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Bwsln Uikjic R I Ro Usl Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gear stages - Feed in the X- and Z-axis - Coolant device with mechanical pump in the machine base - Pinol displacement on the vertical milling head 60 mm - Pivoting, rotating and tilting angled table - Adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Bwoln Uiksu Um Ero Ujl Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine. No. 51265/08 Year of construction approx. 1967 travel X: 300 mm Y: 150 mm Z: 340 mm Bwoln Uioghtvask Uel table size 600 x 2100 mm spindle mounting SK 40 - S20 x 2 spindle speed 40-2000 rpm. 16 steps motor power 1,0 and 1,6 kW pole changeable Mains connection 380 Volt, 50 Hz - feed in X- and Z-axis - spindle speed via 2 motor speeds and 8 gear steps - Pinol shift at vertical milling head 60 mm - Fixed angular table - Adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm weight 650 kg good condition