Used crushing units for sale (132)

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), We sell the shredder as a set including a pit conveyor, shredder, and discharge conveyor. The Vecoplan universal shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power output of 55 kW, is equipped with 60 cutting heads measuring 60x60 mm. A turbo coupling facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. Bodozmzduepfx Agtoll The machine, including the control panel, is offered for sale. The hopper and extraction hood are included. Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. Now that the company is operating a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging for pallet transport.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. Bljdpszl E N Esfx Agtol The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. Bljdpszl E Stofx Agtol The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: excellent (used), Year of construction: 2015, operating hours: 9,000 h, functionality: fully functional, Doppstadt DW3060 Bufalo pre-shredding machine, manufactured in 2015, in perfect condition, with 9,000 operating hours and ready to continue performing effectively. Blodjzwumqjpfx Agtel

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 2,500 kg, opening width: 1,400 mm, extraction nozzle diameter: 200 mm, power: 37 kW (50.31 HP), We are offering this used Gross GZ40 shredding plant, manufactured in 2021. Four-shaft shredder GZ 40 Feed opening: 1,400 x 1,300 mm Throughput capacity: material and screen dependent Disc diameter: 280 mm Cutting head: 700 x 760 mm Number of cutting shafts: 2 Number of cutting discs: 38 Number of clearing shafts: 2 Number of clearing discs: 38 Motor power: 2 x 18.5 kW Screen size: without screen Suction nozzle: 200 mm Weight: approx. 2,500 kg Machine with hopper, control cabinet Year of manufacture: 2021 Blodpfezr Rvdex Agtol If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Blodpozxqhyofx Agtjl Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Bledpfszv U Ifjx Agtjl Hydraulic unit with control cabinet and operator panel, 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Discharge conveyor belt recently replaced.

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Bledpeztp D Asfx Agtjl Feed conveyor Erdwich HA800 hammer mill Soundproof enclosure Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: like new (used), Year of construction: 2019, operating hours: 39 h, functionality: fully functional, machine/vehicle number: MZ-7321/19 / 11024, total height: 2,198 mm, total width: 1,648 mm, total length: 3,500 mm, overall weight: 3,500 kg, rotor diameter: 400 mm, rotor width: 850 mm, type of input current: AC, input voltage: 400 V, rotational speed (max.): 100 rpm, power: 30 kW (40.79 HP), As-new single-shaft shredder / size reduction system with minor signs of use. Used solely for testing purposes. The rotor shaft is equipped with a heavy-duty wear protection. Cassette system for rotor knives, 34 x 34 mm. Electric motor 30 kW, total installed power 37 kW, hydraulic power 3.75 kW, 400 V, 3-phase. Additional new rotor and stator knives included as spare parts. German operating manual. Three-part, adjustable stator knives. Hopper lockable, perforated screen 40 mm. The machine can be demonstrated under power. No warranty after purchase. Free loading from factory premises – Raesfeld. Detailed photos available on request. Subject to prior sale. Prices are net prices. Bledpfx Agjy E S S Aetsl

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Bledpfx Agsx I Dc Estsl Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Sales conditions & pricing 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Availability: lead time after order Price: €310,000 net

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: Bsdpezl Shzsfx Agtoll • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm Bsdpfxsztndus Agtsll -Weight: 8400 kg / 340 kg

Condition: used, Year of construction: 2014, operating hours: 17,000 h, overall weight: 52,500 kg, power: 328 kW (445.96 HP), With FABO Guarantee Purchased & Overhauled by FABO: The machine was purchased by our company and has undergone all necessary inspections. Comprehensive Maintenance: All service and maintenance procedures have been meticulously completed. Replaced Wear Parts: All worn-out wear parts have been replaced to meet original quality standards. Ready for Immediate Use: The machine is in stock and can be shipped to your construction site the same day it is purchased. Technical Specifications: Model: Sandvik QI441 Serial Number: 1884BG14205 Operating Hours: 17,000 hours Capacity: 300 – 500 tons/hour Crusher Dimensions: 1380 x 800 mm Motor : CAT 328 kW Bodpfsy Rx Rvsx Agtell Weight: 52,500 kg Year of Manufacture: 2014

Condition: not inspected (used), Year of construction: 2008, functionality: limited functionality, Model/Type: Erdwich M480/3-1000 Serial No.: 1896 Year of construction: 2008 Running Hours: unknown Warranty: Partially functional; no warranty or guarantee Availability: approx. 4-8 weeks after receipt of down payment Details: Bjdpfoylhbfox Agtjll + Cutting unit, hopper, frame, and control unit + 3-shaft shredder + 2x 22 kW drive motors + Chip conveyor

Condition: used, functionality: not functional, power: 29.42 kW (40.00 HP), Year of construction: 1976, Used Kue-Ken jaw crusher 105. For details, see photos. Operating manual available. Price ex works, excl. VAT. The left and right bearings need to be replaced. Bsdpfxjx H Nwxj Agtoll

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 22428, total height: 4,000 mm, total width: 2,500 mm, total length: 13,000 mm, overall weight: 11,000 kg, rotor diameter: 600 mm, rotor width: 1,000 mm, type of input current: AC, opening width: 1,000 mm, rotor length: 1,000 mm, sieve perforation: 8 mm, power: 150 kW (203.94 HP), Herbold SM 600/1000 - S7-2 Recycling Plant, complete – Year of manufacture 1999 – Ready for immediate use Bsdpfx Agozfxqvjtsll For sale is a fully equipped and operational recycling plant based on a Herbold SM 60/100 shredder, manufactured in 1999. This is a complete production line, from the feed hopper to the filled end product. The plant is ready for operation, runs reliably, and can be demonstrated in operation after prior arrangement. The plant is mounted on a semi-trailer and can be used flexibly at different locations. The integrated 340 kVA generator enables autonomous operation. The plant was specifically designed for the processing of plastic materials and features an enlarged material inlet, which is particularly suitable for feeding in crates and large-volume plastic parts. For export or stationary installation, the plant can be disassembled after prior arrangement. Preparation for container or sea transport is possible. Equipment: Herbold SM 60/100 shredder Year of manufacture 1999 Generator 340 kVA Conveyor system Filling system Dust extraction system Demetallization / metal separator Complete plant, ready for immediate use Condition: Functional and in regular use Good technical condition Extensive spare parts stock included Several spare conveyor belts Conveyor fan Spare motors Set of spare blades Deflector wedge Other wear and spare parts Immediately available upon agreement Advantages: Complete line from a single source Autonomous operation possible through generator Suitable for recycling companies, plastic processors and export If you are interested, please contact us by phone or message. Inspection and demonstration are possible after prior arrangement.

Condition: used, Year of construction: 2016, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30 kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. Bjdpozlh Taefx Agtsll This makes the machine ideally suited for use in industrial and craft businesses as well as for wholesale and retail trade of packaging materials made of Styrofoam. Depending on the screen set, simply shredding your Styrofoam waste achieves a volume reduction of 3:1. Custom-made solutions are available upon request. VAT is stated separately on the invoice. Shipping is included throughout Germany, with an extra charge for island deliveries. If you have any questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,100 h, functionality: fully functional, overall weight: 50,500 kg, Sandvik QJ341 jaw crusher 2016 year 2100 hours on crusher 4700 hours on engine CAT C9.3 engine Inlet 1200x750 mm CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Weight 50,5 tons Fitted with side conveyor Fitted with overband magnet Bljdpfx Agjyn Inkjtol Machine in great working condition, ready for work like NEW

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,000 mm, total width: 1,100 mm, total length: 1,900 mm, overall weight: 980 kg, rotor diameter: 260 mm, type of input current: three-phase, rotor length: 600 mm, sieve perforation: 10 mm, input voltage: 380 V, The PC-800,PC-600 and PC-400 Plastic Crusher is a heavy-duty rotor knife granulator designed for efficient recycling of thermoplastic waste and production scrap. Built for continuous industrial operation, it delivers high performance while producing uniform plastic regrind suitable for immediate reuse in the manufacturing process. The crusher is capable of processing a wide range of materials, including LDPE, HDPE, PVC, PP, PET, PS, PA (Nylon), engineering plastics, rubber waste, and non-abrasive thermosetting materials Bedpezvmy Tofx Agtsll Technical Specifications Model: PC-600 • Rotor diameter: 260 mm • Rotor knives: 18 moving knives • Stationary knives: 4 knives • Capacity: 100–250 kg/h • Motor power: 15 kW • Power supply: 380 V, 3-phase, 50 Hz • Feed opening: 320 × 620 mm • Screen hole size: 10 mm • Rotor speed: 885 rpm • Maximum material wall thickness: up to 10 mm • Machine dimensions (L × W × H): 1900 × 1100 × 2000 mm

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Bjdpfx Agoyt Iawstjll Machine is without gearbox.

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Bedpfox Hyfysx Agtsll Engine power: 11 kW

Condition: used, Year of construction: 1993, output 18,5 kw number of blades 28 Blodpfxsyk H Tqj Agtsl Weight 1300 kg

Condition: ready for operation (used), Manufacturer: H&G Bsdpfxszp Ilqo Agtell Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. Bjdpsyw N Acsfx Agtell All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Bljdpfxezp Ipis Agtsl Weight: 1800 kg Engine power: 11 kW