Used Automatic punching machines for sale (168)

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm no. of strokes 30 - 300 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 350 mm table surface area 780 x 640 mm hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the German Safety Regulations (UVV) Cgslq Nevut Huerq Tot with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available

Condition: used, Year of construction: 1985, Functionality: fully functional, drop-through hole in table: 1,500,700 mm, table length: 1,400 mm, table width: 500 mm, pressing force: 100 t, stroke adjustment: 20,100 mm, overall weight: 22,000 kg, DGUV certified until: 05/2026, Raster HR 100-1400 automatic punching machine with Kohler roller feed Tie-rod construction High-quality solid cast iron construction Hydraulic overload protection Stroke height 20-100 mm Ram adjustment 60 mm Celq Nrqswg Ag Hj Togt Speed 15-80 rpm S7 control system, built in 2003 Available with Kohler belt conveyor, straightener, and washing machine upon request

Condition: used, Functionality: fully functional, We offer various older eccentric presses, some with feed. One of the presses is equipped with a spring assembly. Notes: Price: Negotiable Cgjlqjvkb Ave Nrq Tot Sale only to self-collectors Sale exclusively as spare parts donor, without guarantee If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Hare 5iT Hydraulic Press Complete with 8 and 4 station rotary table Csljv Tyuvsq Nrq Togt

Condition: used, Year of construction: 2011, Bogle B250-740 Stamping Press Feeder: BBV 202 / 120 Cgslewa Sp Req Nrq Tot Max. Pressure: 200kN Total connected Load: 40kW Compressed air connection: 6-10 bar Weight: 4830kg

Condition: used, Double-column punching press EBU - Eisenwerk Hensel Type HK 130 Z Cgelq Nrswa D Npsq Tjt Eccentric punching press, eccentric press Mach. No. P 54096 / 96, built in 1996 Pressure force 130 tons Table size 1200 x 880 mm Stroke adjustment 8 to 140 mm Ram adjustment 100 mm Ram surface 1150 x 800 mm Table opening (support edge) 450 x 350 mm Table opening (through hole) 440 x 235 mm Column width 1200 mm Column width across 595 mm Installation height of maximum stroke of ram at TDC max. 510 mm (ram adjustment at top) Installation height of maximum stroke of ram at BDC max. 370 mm (ram adjustment at top) Stroke rate 40-120 strokes/min. Table height above floor: 900 mm Main drive motor power: 15 kW Hydraulic motor power: 2.2 kW Total current consumption: 40 amps Power supply: 400 volts, 50 Hz - Hydraulically operated multi-disk wet clutch and spring-loaded safety brake - Continuously adjustable drive via frequency converter (120 strokes at 80 Hz) - Hydraulic overload protection - Automated stroke adjustment - Motorized ram height adjustment with digital actual value display - Pneumatic, continuously adjustable ram weight counterbalance - Electrical cabinet adjacent (120 x 40 cm x height 220 cm) - Electric two-hand operation for stroke release - Movable Plexiglas safety door on the operator side, with pneumatic opening - Lubrication unit for circulating oil lubrication (fixed to the machine) - Hydraulic unit for the clutch-brake combination (fixed to the machine) Machine) - UNIDOR APS-Mini tool monitoring system, shown opposite - Operating instructions and documentation for the press available as PDF - Electrical circuit diagram available Included: EBU roller feed unit, type EVS 320 Order No.: ZT01054949 / 96, built in 1996 Strip width: 320 mm Strip thickness: max. 4 mm Strip cross-section: max. 1000 mm² - Feed control via the SIEMENS machine control system - Programmable feed path from the roller feed system - Control panel for feed system with Siemens S5 control system with OP 15, shown opposite Space requirement for press with feed system: L x W x H 380 x 180 x 375 cm Space requirement for control cabinet: L x W x H 125 x 41 x 200 cm, approx. 450 kg Transport dimensions of the machine with control cabinet and disassembled drive motor: L x W x H 400 x 230 x 343 cm Height with drive motor: 375 cm Height without drive motor: approx. 343 cm Weight: 18 tons Good condition

Condition: used, Year of construction: 2003, installation height: 555 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 315 t, ram stroke: 160 mm, overall weight: 45,000 kg, material thickness: 5 mm, sheet thickness steel (max.): 5 mm, controller manufacturer: SIEMENS, controller model: S7, lifting height: 160 mm, load capacity: 4,000 kg, worktable length: 2,000 mm, coil outer diameter: 1,500 mm, coil weight: 4,000 kg, coil width: 400 mm, material width: 400 mm, number of straightening rollers: 9, sheet thickness (max.): 5 mm, tool height: 555 mm, CONTROLS .. PLC SIEMENS S7 PRESS DESIGN .. drive system: knuckle-joint .. frame design: H-frame, monoblock .. openings in uprights: yes .. number of suspensions: 2 .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 315 to .. nominal work capacity: 38 kNm PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1200 mm .. thickness of bolster plate: 200 mm SLIDE .. slide force: 315 to .. table surface (left-right): 1995 mm .. table surface (front-back): 1100 mm .. stroke: 160 mm .. stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 140 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 80 /min .. main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 555 mm .. distance between columns (H-frame): 2060 mm .. passline opening (free passage in side columns): 1060 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm COIL CHAIR .. coil weight max.: 4 to DECOILER .. design: single reel, traversable .. sheet width max.: 400 mm .. sheet width (min): 30 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm .. movement: 1500 mm LEVELLER UNIT .. sheet width max.: 400 mm .. sheet width (min): 50 mm .. material cross section max. (450 N/mm2): 1000 mm² .. number of leveller rolls: 9 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 150 .. feed velocity min.: 5 m/min .. feed velocity max.: 50 m/min STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Celq Nswbn Dajrq Togt DIMENSIONS / WEIGHTS .. total weight approx.: 45000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press Cslqjwab T Es Nrq Togt PK No. 630

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Cgslq Newdm Dkerq Tet Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: good (used), Year of construction: 1972, Functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Cgjlq Newcxccsrq Tst Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: used, Year of construction: 1997, Functionality: fully functional, ruderer BSTA 50 UL Stamping Press Power in tons : 50 T Table length : 760 mm Table width: 650 mm Ram stroke : 51 mm Colq Njwa Snmsrq Togt Nbr. of strokes/min : 1120 Distance between columns : 760 mm Feeder : BBV202/120 Length x width x height 3100 2700 1800 Weight 8000 kg

Condition: new, Year of construction: 2024, operating hours: 5 h, Functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Cgslq Nrqev A Rq Tj Tjt Length 2200mm Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg

Condition: good (used), Year of construction: 2008, total height: 5,400 mm, installation height: 500 mm, table length: 2,000 mm, table width: 1,100 mm, pressing force: 250 t, overall weight: 57,000 kg, material thickness: 4 mm, sheet thickness steel (max.): 4 mm, space requirement length: 4,800 mm, space requirement width: 2,750 mm, controller manufacturer: SIEMENS, controller model: S7 300, power: 95 kW (129.16 HP), load capacity: 2,000 kg, worktable length: 2,000 mm, coil outer diameter: 2,000 mm, coil weight: 2,000 kg, coil width: 300 mm, material width: 300 mm, number of straightening rollers: 7, sheet thickness (max.): 4 mm, tool height: 500 mm, CONTROLS .. electronic controls SIEMENS S7 300 PRESS DESIGN .. drive system: eccentric / crank .. number of suspensions: 2 .. table cushion: no .. quick die change system: yes PRESS FORCES .. total force (nominal): 250 to PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1100 mm .. height above floor level: 1105 mm .. opening in bed (left-right): 1700 mm .. opening in bed (front-back): 305 mm SLIDE .. table surface (left-right): 2080 mm .. table surface (front-back): 1000 mm .. stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 120 mm .. stroke adjustment: yes .. stroke min.: 20 mm .. stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS Celewbgy Hoq Nrq Tsgt .. shut height (stroke down, adjustment up), BDC: 500 mm .. distance between columns (H-frame): 2055 mm .. passline opening (free passage in side columns): 810 mm DECOILER .. sheet width max.: 300 mm .. coil weight max.: 2 to .. max. diameter of coil: 2000 mm .. mandrel expansion range up to: 550 mm LEVELLER UNIT .. sheet width max.: 310 mm .. number of leveller rolls: 7 .. diameter of leveller rolls: 80 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 200 mm .. sheet thickness max.: 4 mm .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. total power consumption: 95 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4800 mm .. space requirements -front/back-: 2750 mm .. total height: 5400 mm .. total weight approx.: 57000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. European CE standards: yes Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force monitoring - Temperature sensors at the bearing points - ABS AHM 2.0T decoiler (1999) - PBK RSD 8/6/300 straightener (2010) - Loop belt control - LW-060-02 roller feed (2008) - Advanced central lubrication system - Press force monitoring - Temperature sensors at the bearing points - Hydraulic tool clamps - Spring-loaded machine feet - Optional: Bilz air springs for an additional €7,000

Condition: used, Year of construction: 2013, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Cgolq Njv Tvg Ujrq Tst Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 700 mm Hole in table: 1.910 x 300 mm Number of strokes: 30 - 300 s.p.m. Required power: 57 kW Weight of machine approx.: 39 ton Standard configuration Dreher roll feeder Extended machine accessories

Condition: excellent (used), Year of construction: 1985, MECFOND blanking line Pressing force 5.000 kN Stroke 300 mm ram adjustment 250 mm Stroke rate 15-60. rpm Installation height 790-1035 Table surface 3,500 x 2,500 mm Belt conveyor Belt width 600-2000 mm Belt thickness 0.5-2.0 mm Cjlq Nowdm Ddsrq Tegt Reel load capacity 30,000 kg

Condition: new, Year of construction: 2025, total height: 5,150 mm, ram adjustment: 200 mm, installation height: 750 mm, total width: 2,600 mm, total length: 4,000 mm, table length: 2,500 mm, table width: 1,300 mm, conveyor belt width: 430 mm, pressing force: 315 t, ram stroke: 300 mm, table height above floor: 1,117 mm, distance between side stands: 850 mm, distance between stands: 2,580 mm, overall weight: 54,000 kg, control voltage: 24 V, Standardized 315-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. Cgjlqewc A Ebe Nrq Tet For technical specifications, see PDF document. Delivery time: 6 months

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery Cgolqjvdt Sps Nrq Tst if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Cslq Nrqoip Uqmj Togt Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: defective spare-parts repository (used), A PACKAGE CONTAINING 2 MACHINES IS OFFERED 1 x BRUDERER - BSTA 30 Maximum pressure: 30 t Stroke rate: 100 - 600 rpm Drive power: 0.96 to 5.75 HP Mains voltage: 3 x 380 V AC Mains frequency: 50 Hz Control voltage: 24 V AC Compressed air connection R 1/2" 5-10 atm Stroke adjustable 8-40 mm Ram height adjustment 40 mm Tool installation height (WEH) adjustable 280 mm +/- 20 mm Max. width of installation tools - installation opening 330 mm Cjloh S U Stjq Nrq Tjgt Max. belt opening width 170 mm Machine dimensions: Max. height 2150 mm Width 1200 mm Depth 1160 mm Control panel: Height 960 mm Width 700 mm Depth 350 mm Machine weight approx. 2700 kg Control panel weight 130 kg 1x PASU 25/1 automatic punching machine Nominal pressing force 25 Mp Maximum stroke rate 500 rpm Minimum stroke rate 200 rpm Ram stroke 25 mm Clearance between columns Width 355 mm Depth 315 mm Largest distance between table and ram 280 mm Ram downward adjustment 50 mm Largest belt width 140 mm Largest belt feed 100 mm Largest sheet thickness to be cut 1.25 mm Working capacity 25 kpm Torque 140 kpm Net weight 2800 kg Space required - Length 1.8 m - Width 1.7 m - Height 1.8 m The buyer is responsible for disassembly, removal, and transport! The machines are expressly sold as defective by a private seller. No warranty and no returns are accepted!

Condition: used, Year of construction: 2009, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Table surface area : 1.600 x 1.200 mm Slide area: 1.600 x 700 mm Hole in table: 1.510 x 300 mm Number of strokes: 30 - 300 s.p.m. Required power: 51 kW Weight of machine approx.: 32 ton Standard configuration Colq Njv Tvgnerq Togt Dreher roll feeder Extended machine accessories

Condition: excellent (used), Year of construction: 2017, Schuler SERVO transfer press MSD2-800 Operating hours 14097 Stroke rate 3-60 1/min Ram adjustment 300 mm Stroke 80-360 / 400 mm ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm Schuler Transfer System Schuler feed Coil line Coiltech Cgslq Nrqewdm A Ts Tot Strip width 120-1,300 mm Material thickness 0.6-5.0 mm Reel load capacity 10,000 kg

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Celq Nrqsfim Dwo Tsgt Table surface usable: WxD: 440 x 360 mm

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Cgolq Neuqd Aberq Tjt Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120

Condition: excellent (used), Year of construction: 2007, Helmerding press Type: 315 KDH / 2100 / 2-m Pressing force: 3,150 kN Lifting height: 40-200 mm Strokes per minute 25-100 1/min Ram adjustment 150 mm Installation height 550 mm Ram area 2,000 x 1,100 mm Table surface 2,000 x 1,200 mm Fold-through hole in press table 1,750 x 350 mm Motor power 75 kW Weight of the press 49,000 kg Year of construction 2007 DREHER roller feed Type: WAV-MD-22 Cjlq Nrqowdm Ays Togt Belt width max. 510 mm Belt thickness max. 4.0 mm Year of construction 2003 DREHER straightening machine Type 1676 D-FQ strip width 20-500 mm strip thickness 0.8-5.0 mm Year of construction 2003 DREHER decoiler with hydr. auxiliary drive Type 2381 D-MO-FPS Load capacity 4,500 kg belt width 520 mm

Condition: excellent (used), Year of construction: 2010, Schuler SERVO transfer press MSD2-630 Operating hours 28146 Stroke rate 3-60 1/min Slide adjustment 300 mm Stroke 80-400 mm Cgolq Nowdm Atsrq Tet ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm Schuler Transfer System Schuler conveyor system Belt width 80-1,300 mm Material thickness 0.5-3.0 mm