Used Automatic punching machines for sale (168)

Condition: good (used), machine/vehicle number: Blinie, BSTA 30 Number of strokes 600 spm Cgjlq Nrqsdguhce Tst Feed BBV 120/60 Pressing force 30 T Maximum strip width 190 mm with CE certificate and warranty Machine rebuild Good condition More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod Colq Nogpxc Sorq Togt - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: excellent (used), Eccentric press Cgolq Nrqjttw Emj Tjt Inv. no. 3413 Fabr. ter Hart Type EP 25 Pressing force: 25 tons * Stroke adjustment: 6 to 60 mm * ram adjustable 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Projection: 175 mn * Foot operation * Connection: 1.5 kW * Weight: 850 kg.

Condition: used, Year of construction: 2004, Press capacity: 63 ton Ram stroke adjustable: 8 - 80 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 275 mm Free frontal opening L-R: 720 mm Free lateral opening F-B: 320 mm Table surface area : 710 x 700 mm Slide area: 500 x 400 mm Hole in table: 640/520 x 200 mm Number of strokes: 100 - 500 s.p.m. Table height over floor: 640 mm Celq Nrqovmfhzj Tegt Required power: 22 kW Dimensions L x W x H: 1900 x 1600 x 2690 mm Weight of machine approx.: 6,2 ton Standard configuration Roller feed Zehnder & Sommer type LV 22 AK SS - year of construction 2004Material width 220 mmMaterial thickness 0.1 - 2.5 mm Thickness passage max. 4 mm Material cross-section max. 200 mm2 Feed accuracy +/- 0.05 mm Speed max. 1000 H/min.

Condition: new, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: SCV-40-G8-6-KW3, total width: 406 mm, overall weight: 4,000 kg, control voltage: 400 V, sheet thickness steel (max.): 6 mm, Completely new machine, never put into operation due to failed work. Motorized unwinding unit with loading carriage. Electric feeder (AE400). Drive (motor) + control from SIEMENS. The measuring roller is located in the front of the machine, which monitors the correct feed with an accuracy of +/- 0.1 mm. The unit complies with CE standards. Coil weight: 4,000 kg Coil width: 406 mm Csljv Dumbeq Nrq Tsgt Coil outer-inner diameter: Ø1400 mm - Ø508 mm. Material thickness: 0.6mm - 6mm Voltage: 400 V - aux 24V

Condition: used, Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system for form folding machine, profiling machine, profiling system, slat production, blinds production -Handover: in the current condition as seen -The punch is without a hydraulic unit but can be supplied at an additional cost -Insert tool -2 punches -both sliding: 500 mm Cgjlqsgfwgio Nrq Tjt -for small punching jobs -Dimensions: 1230/2020/H1100 mm -Weight: 986 kg

Condition: good (used), Year of construction: 1998, Functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, sheet width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Cgslq Njq Ikhperq Tjt Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication Cslqjpvlf So Nrq Togt - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Year of construction: 1988, Condition: used, 220 V frequency 50 Hz combination machine . extensive accessories ca. 50 Sätze Cgolq Nrqendz Npj Tjt pressure 50 t

Condition: used, Year of construction: 2004, Press capacity: 63 ton Ram stroke adjustable: 8 - 80 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 275 mm Free frontal opening L-R: 720 mm Free lateral opening F-B: 320 mm Table surface area : 710 x 700 mm Slide area: 500 x 400 mm Hole in table: 640/520 x 200 mm Number of strokes: 100 - 500 s.p.m. Table height over floor: 640 mm Required power: 22 kW Dimensions L x W x H: 1900 x 1600 x 2690 mm Weight of machine approx.: 6,3 ton Standard configuration Roller feed Zehnder & Sommer type LV 22 AK SS - year of construction 2004Material width 220 mmMaterial thickness 0.1 - 2.5 mm Thickness passage max. 4 mm Cslq Nrjvmfhueq Tegt Material cross-section max. 200 mm2 Feed accuracy +/- 0.05 mm Speed max. 1000 H/min.

Condition: excellent (used), Year of construction: 1983, Force: 45 tons Daylight: 205/305mm Table: 700x450mm Ram: 700x360mm Ram adjustment: 50mm Cslq Nsgfvnnsrq Tegt Stroke: 10 - 50mm Strokes per minute: 80-400 Requested power: 11 kW Weight: 7.200 kos. Height: 3.100mm

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed Cgolehlnzkeq Nrq Tet - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Colqjda Ha No Nrq Togt Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Make: Sankyo Cjlqenl Sns Nrq Tjgt Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Year of construction: 1980, Condition: used, control panel Boschert Stanze Year 1990 Colq Nrqoh D Aqge Tjgt +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Cslq Nrjuh U Etjq Togt Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: excellent (used), Year of construction: 2004, with soundproof booth Cslq Noi An Ttorq Togt Table surface 1000x550 mm, ram surface 1000x450 mm

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Cgjlq Nrqodzqlvo Tst Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: good (used), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of construction: 1973 Type / Model: HR40NL Pressing force: 40 t Table: 650 x 385 mm ram: 350 x 190 mm Projection: 175 mm Distance table - bottom edge of plunger: 300 mm through hole: 350 x 130 mm ram adjustment: 80 mm Plunger stroke: 0 to 70 mm adjustable Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness continuous stroke: mm Stroke rate: 40 to 180 /min Colqordgncs Nrq Tjgt Connection: 4 kW Accessories/equipment: Pliers feed Condition: good Weight: approx. 4 tons Machine dimensions: 1,400 x 1,800 x 2,250 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: Cgolqsdhzf Is Nrq Tot • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Year of construction: 1993, Condition: refurbished (used), Delivery date from 05.2023 Cjlq Nrjizi Hmeq Tegt BSTA 110H, with BBV 202 /120 Mechanically overhauled. CE possible. Contakt us !

Year of construction: 1983, Condition: used, Bruderer BSTA 50 HL with BBV 202/120 Celqeizwrlj Nrq Tsgt Available delivery time on request CE possible Contact us!

Year of construction: 1990, Condition: good (used), BSTA 50 L special Celqeizkymo Nrq Togt Feeding direktion from back to front! max. stripwide approx. 900mm Feeder special BBV max. stripwide approx. 900mm

Year of construction: 1986, Condition: ready for operation (used), Available from 10.2023 BSTA 25, with BBV 202/120 CE possible Contact us! Colq Nrqoizkp Ds Tjgt

Year of construction: 1986, Condition: ready for operation (used), BSTA 60 HL, with BBV 202/120 Cgsljizkmtjq Nrq Tjt CE possible Contact us!