Used Gluing presses for sale (108)

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 1855680, pressing force: 80 t, frequency: 50 Hz, power: 4 kW (5.44 HP), table length: 1,400 mm, table width: 800 mm, operating pressure: 270 bar, Manufacturer: Joos Model: HP-S 80 Year of Manufacture: 2004 Pressing Power: 800 kN Three-Piston Suitable for woodworking and industrial applications Well-maintained and in good working condition Previously used in a company setting, reliable and durable. Despite the dust, this Hydraulic Press continues to deliver reliable performance. Cgjb Euhuerp D Easvst Contact us today to arrange a viewing or to inquire further information.

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Gluing Press Hildebrand 6.1m Cgsb Eov Nxflsuhuvet Year of Manufacture: 1999 Technical Condition: Very Good

Condition: good (used), Line for gluing layered floors / layered boards / veneers / Veneer / For sale due to company restructuring: Line for gluing, e.g. layered floors, backings for three-layer parquets and wooden boards, veneers, veneers, etc. Production capacity in single-shift operation is approximately 550-600 m². The line consists of the following elements: 1) Pneumatic feeder 2) Winter scissor table 2500x1300 mm 3) Omma brushing machine 1400 mm 4) IR lamp (Friz) 5) Omma PU glue applicator 1700 mm and Nordson melter. 6) Automatic Conveyor with Esse Due roller feeder 7) Calander rollers 1300 mm 8) Italpresse 2500x1300 mm pass-through press 9) Italpresse belt conveyor 10) Winter 2500x1300 mm scissor table Cgjb Euhov Rrvmeuvst The line is still connected and can be tested on site. Everything is 100% functional.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Automatic hydraulic frame press Tiger Automat 3000 Manufacturer Tiger Italy Year of construction 2006 S/n 152330506 Hydraulic frame press Pressing range 300m / 2000 mm manual and automatic cycle Cgsb Euhuora Rbnevet 0-4500ps 0-315 bar Hydraulic pump 1.5 kW 400 Volt, 50 Hz CE marked Weight:2500 kg

Condition: excellent (used), Self-loading press for gluing Orma LS ECO 35/13 AS-BO Gluing length 3500mm Gluing width 1300mm Cebovydlxs Euhuvegt Automatic material loading Shelves heated with oil up to 120C Press pressure 90t 7 side material clamps Shelf piston diameter 70mm Total power 34kw CE certificate Year of production 2006

Condition: new, Year of construction: 2022, Functionality: fully functional, The kit includes a press for compressing beams, an adhesive applicator and a testing press Cgsb Euevnma Ijhuvst ask for more details.

Condition: good (used), Year of construction: 1998, Ramarch gluing press Type: Block 84 Year of construction: 1998 Press length: 4,000 mm Press height: 1,650 mm Press thickness: 80 mm Cgjbev Ay Smo Euhuvet 8 vertical hydraulic press cylinders 8 horizontal pneumatic press cylinders

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Gluing Press Hildebrand 6.1m Cgsb Euhjv Nxdzsuvjt Year of Manufacture: 1999 Technical Condition: Very Good

Year of construction: 2010, Condition: excellent (used), Manual hydraulic press Max material dimensions 2200x1380x120mm Cgsb Eush Hqadohuvet 6 hydraulic cylinders

Condition: refurbished (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 908086, feed length X-axis: 3,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 140 mm, total width: 50,000 mm, total length: 40,000 mm, total height: 28,000 mm, overall weight: 12,000 kg, working length: 3,000 mm, working width: 1,600 mm, pressing force: 22 t, type of input current: AC, power: 18 kW (24.47 HP), INFEED PRESS 3000X1600 ITALPRESSE WEIGHT 12 TONS Cgsb Euheqnufrjuvet It has thermal oil electric heaters for both plates. Both plates are cast iron with cross drilled holes. Massive and robust. Maximum temperature is up to 200 degrees. Pressure of the plates is up to 100N/cm

Condition: ready for operation (used), A line for joining boards by length, consisting of: a saw for cutting out defects in boards marked with chalk, a micro-joint milling machine for boards with a maximum width of 23 cm, thicknesses from 1 cm to 12 cm, a press for joining, a saw for forming lengths. Total length of the line about 40 m. The machine is functional and ready to work. Cebev Hhi Uj Euhuvjgt Possibility of dismantling and loading onto a truck.

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, total width: 300 mm, total length: 8,000 mm, total height: 1,600 mm, type of input current: three-phase, power: 15 kW (20.39 HP), temperature: 21 °C, Technical Details Pressure up to 14,5t/m (at 120 BAR); Flexible size from 6 to 14m with (2m step); Currently press is 8 M possible to purchase additional 6 m from producer. 15kW hydraulic station. Work Material: Max height: 1600mm; Max width: 300mm; Length: from 6 to 14m. Currently 8 M Additionally to press comes. Cjb Euhevitlgsuvogt Infeed / outfeed conveyor for feeding the press; Outfeed buffer table for rapid assembly restart; PU glue spreader; Roller tables for feeding the glue spreader. All system works 100% it was purchased to start new business, which did not work out.. New price for all system was 130 000 Eur Location - Latvia - Still assembled and possible to test.

Condition: new, Year of construction: 2024, working length: 5,000 mm, working width: 1,200 mm, material thickness: 70 mm, power: 1.1 kW (1.50 HP), Rotary press for width gluing 6 floors, maximum gluing dimension 5000 x 1200 x 90 mm or by order Csb Eujlih Scehuvogt

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Gluing Press Hildebrand 6.1m Cgsb Euhjv Nxdueuvst Year of Manufacture: 1999 Technical Condition: Very Good

Condition: good (used), Year of construction: 1999, The maximum working area is 3000 x 1600mm Minimum working area 390 x 420mm 2.2kW engine Weight 1500 kg Ceb Euhueg Np Rasvegt

Condition: excellent (used), Self-loading press for gluing Orma Macchine Cob Euovq Rcxjhuvsgt Working length 2500mm Working width 1200mm Automatic material loading Side material clamps

Condition: excellent (used), Gluing stand/gluing press Pneumatic Cgjb Euhuotu Iixjvjt Dimensions: 3100 upper heating element, width 2300 mm, depth 550, height 1850

Condition: ready for operation (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: P 0981000432100, Strong hydraulic press used for gluing block wood and door or window frames after service all functions are functional can work in manual and automatic mode. Cgjb Ejvzbcweuhuvet

Condition: new, Frame press with rack and pinion drive and a quick stroke of 140 mm Sturdy base frame made of thick-walled hollow profiles and galvanized pressing units with 50 mm precision hole pattern. Bolted base frame, Angular accuracy is guaranteed by a cross screw connection, the press units have Cob Eevcbctsuhuvegt The press units have a ball bearing guide. Universally applicable as a frame press, panel and carcass presses etc. The pressure element is a rack and pinion gearbox with a fast stroke of 140 mm and a pressure of 1 ton Basic equipment: 3 press units with rack and pinion gearbox 90 degree stop Clamping dimensions H x W 1600 x 2900 mm - with frame 1600 x 2600 mm Installation dimensions L x W 3050 x 750 mm - height without chassis 2120 mm Price: 2.300,00 equipped with: 1 pressing unit with 1 rack and pinion gearbox : 650,00 Euro 1 side pressure unit with 2 rack and pinion gears : 950,00 Euro 1 downholder 250,00 Euro

Condition: excellent (used), Year of construction: 2022, High frequency panel Press Orma Model LS ECO 25/13 Year of production: 2022 Technical condition: very good Manufacturer: Orma Macchine – Italy Work Table and Feed System: • Work dimensions: 2500x1300 mm, 3.25 m² Cgeb Euhov Ayfteuvst • Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system • Limit switch for stopping the press at the end of the work table • 1 foot pedal for moving pieces on the work table • 1 emergency stop button _____ Hydraulic Press Model LS/ECO: • High-frequency platens, dimensions: 2500x1300 mm • Mobile lower platen • Vertical pressing system: o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm • Horizontal pressing unit: o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm o Maximum total force: 7.5 tons o Pistons can be activated via a special device to reduce the pressing area • Rear vertical pressing unit: o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm) o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm • Side pressing unit and rear clamping device: o Allows the production of pieces with unlimited length • Two working cycles: o Manual or automatic, selected by pressing a button o Special cycle for adjusting after pressing • Independent pressing units: o Each of the three hydraulic units has an independent pressure setting • Single hydraulic circuit: o Uses the same oil reservoir o Total power: 5 HP • Main control panel equipped with all command options (PLC included) for press operation • Press structure made of welded steel bars and profiles _____ Evacuation System: • Working dimensions: 2500x1300 mm • Mounted at the rear of the press on the mobile pressing unit • Gravity unloading system with triangular profile elements _____ INCLUDED: a. High-Frequency Generator • 20 kW high-frequency generator • Adjustable to five frequency positions, allowing the generator to be used based on the type of operation • Silicon diode bridge for constant efficiency • Fully equipped with all components for connection to the press • Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission o Aluminum coating functions as positive and negative poles (upper and lower platen) b. Stainless steel platen coating c. Height adjustment for side steel pressing plates d. Additional thickness for the side pressing plates We offer professional dismantling, loading, installation, commissioning, and training on machine operation. We also provide ongoing maintenance services and access to spare parts.

Condition: used, pressing surface: approx. 2,800 x 1,000 mm press cylinder: 6 Cgjbjviwqms Euhuvot

Condition: new, - NEW -in basic equipment:- 3 press units, 90 degrees stop.- 1 side pressure device with2 trapezoid spindlesDescription:A multifunctional glueing andFrame press forexact and accurate angle mounting,for gluing drawers,Carcasses, surfaces and much nting units made of trapezoidal spindlewith thrust bearing made of precision tubes,2 tons pressure and 120 mm ss units on ball bearing guides,galvanized, with 100 mm precision hole profiles made of thick-walled rectangular spannmaße:(HxB) 1170 x 2110 mmAccessories available at extra costStorage location 97447 Gerolzhofen- freely loaded - Cob Euevwgb Dehuvogt

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Weinig Dimter ProfiPress 2500 3HF LZ Year of production: 2009 Technical condition: very good Weinig Dimter ProfiPress 2500 3HF LZ is a high frequency wood gluing press designed for the production of laminated panels and high-strength wooden components. The machine is engineered for efficient and precise length and width bonding using high-frequency (HF) technology. Key Features and Benefits: ✅ High-Frequency (HF) Technology – ensures rapid glue curing, reducing pressing time and increasing production efficiency. ✅ Robust Construction – made from high-quality components, ensuring durability and reliability. ✅ Automated Process – can be integrated into production lines for optimized workflow and enhanced efficiency. ✅ Precise Pressure Adjustment – guarantees uniform quality of the finished product. ✅ Versatility – ideal for manufacturing laminated panels, structural beams, stair treads, countertops, and other wooden elements. Technical Specifications: Cob Euhuevyu Iqsvegt • Maximum Pressing Length: 2500 mm • Pressing Technology: High-Frequency (HF) • Number of Pressure Sections: 3HF (three high-frequency sections) • Pressure System: Hydraulic with precise pressure control • Application: Wide and long gluing • Glue Type: Hot-melt adhesives (e.g., PVAc, PU) compatible with HF technology • Control Options: User-friendly interface and automated gluing cycle programming • Energy Consumption: Efficient power usage for intensive production • Safety System: Sensors and protective covers compliant with CE standards Dimensions of Processed Wood: • Wood width, uniform widths for filling: 30 - 150 mm, usually 120 mm • Wood thickness: 7 - 45 mm, usually 24 mm • Wood length (min./max.): 200 - 2400 mm, usually 1250 mm When using certain additional devices, the minimum wood length must be adjusted accordingly, or a guide system must be used. Specific Pressing Pressure: 18 - 160 kN Type of Wood: Softwood / Hardwood Air Supply Data: • R1" / 1/2" - height approx. 600 mm - oil-free • Airflow: approx. 500 Nl/min (press / glue application) • Dust extraction: approx. 8 bar (extraction system) Electrical Connection Data: • (1) Press, mechanism → 14 kW • (1) High-Frequency Generator (HF) → 42 kW • Power supply voltage: 400V / 50Hz • Weight of the press: 7000 kg (position 5) • Cable channel 300 x 150 mm, recessed in the floor or flush-mounted, with a control cabinet integrated into the machine structure. Foundation: • Concrete slab covering the entire delivery area, minimum thickness 200 mm, compacted and reinforced from both top and bottom. • Static load of the press → see the diagram on the left. • Maximum static load per foot: approx. 150 N/cm² • Any foundation recesses, elevations, or reinforcements must be provided by the customer. • This also applies to platforms, stairs, walkways, and supply lines for pneumatics, electricity, and telephone systems. Working height (AH): 940 mm Weinig Dimter ProfiPress 2500 3HF LZ is a professional solution for manufacturing plants looking for an efficient and precise wood gluing machine. Thanks to HF technology, it significantly reduces the production cycle time while improving the quality of finished products. We also offer professional disassembly, installation, commissioning, employee training on machine operation, and service support.

Condition: new, - NEW -Basic equipment:- 3 press units, 90 degrees ble gluing press, simple and robust,solid frame and proven mechanics -for exact and accurate angle mounting,for gluing corpuses, frames,Surfaces ssure units made of trapezoidal spindle with thrust bearingin precision tubes, 2 tons of pressure and120 mm way. Press units on ball bearingsguide, galvanized, with 100 mm precision holegrid. All profiles made of thick-walled rectangular spannmaße:(HxW) 1170 x 1900 mmAccessories available at extra costStorage location 97447 Gerolzhofen- freely loaded - Ceb Eujvwf U Nehuvjgt

Condition: used, Multi-level gluing press used, good condition Brand Beck Multi-level press with 7 levels Counter bearing 2 pendulum bearings for diagonal gluing Pressure beam length 1200 mm height 60 mm Working length approx. 1200 mm Clamping depth 780 mm Max. material thickness approx. 60 mm Cgjb Euovwgggehuvst Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition, as viewed, without guarantee or warranty