Used Taylor Kitchen Equipment for sale (10)

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. Ksdpsdy Dtrsfx Achslw A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE Klsdpfsru Evgox Achsw

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, PRICE REDUCED by 2,000 EUR!!! Now 17,500 EUR instead of 19,500 EUR!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing what it looks like, except for the computer. A newer, smaller form factor HP computer is included. Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible, up to a maximum of 1000 mm when measured in two parts, half and half...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The original owner, from whom I bought it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password). Accessories are included, such as the original Taylor-Hobson desk, computer, monitor, and seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! Klsdpfx Aszcqy Ejchjw The system will be shipped on two Euro pallets via a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measurement system should definitely be set up and commissioned by a Taylor Hobson service technician, who will then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system may be damaged when it starts up. This is a truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: excellent (used), Three-jaw chuck Make Taylor diameter 280 mm centering 117,3 mm Chuck height 115 mm Kledpfxotuvpzs Achjw Weight 30 kg

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm Kledpfxji Dagkj Achew

Condition: used, This listing is for a 1 of 2 Taylor-Wharton LS6000 Nitrogen Vessel. Kljdpfoxx Aw Tex Achew The unit is in full working condition and is ready for immediate release. The Worthington Industries Laboratory System (LS) Series of cryogenic refrigerators is uniquely designed for vial storage in convenient box-type storage racks. The liquid nitrogen refrigerators offer maximum holding times, which means lower per vial operating costs and fewer refills. They deliver extremely stable low-temperature profiles due to the aluminum inner vessel, and offer storage capacities of between 750 and 6000 standard 2ml vials. The LS6000 is available with a simple and reliable liquid level controller with temperature readout that provides automatic filling and alarm features.

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Kodolnanwspfx Acholw

Condition: used, For sale: TAYLOR brand machine for preparing milkshakes, granita/slush ice, ice coffee, and other frozen beverages. NEW PRICE: 250,000 CZK excluding VAT. The machine is in functional condition, ready for immediate operation. Very fast return on investment. Taylor is manufactured in the USA and has had representation in the Czech Republic for several decades, ensuring hassle-free spare parts availability. Features a 6.6-liter freezing cylinder and an 18.9-liter mix reservoir. Pasteurization function included. Indicator lights (Mix-low and Mix-out) alert staff when the mix in the reservoir is insufficient. Automatic density control maintains consistent product quality. Agitator design allows for quicker shake dispensing. Multiple units available; price listed per piece. Kjdpfoyn Dd Usx Achelw

Condition: used, TAYLOR HYDRAULIC ROTARY CLAMP - USED - Working length mm. 2400 - Working width mm. 800 Kodpewrm S Dofx Achjlw - 20 sections - N. 3 pressers for each section

Condition: refurbished (used), functionality: fully functional, Taylor Hobson Tallyrond 300 Kledpfx Ajxpqwischjw In good condition, Completely overhauled by sm-instruments (with new control unit and software) Includes side table and accessories Delivery time: several weeks