Gluing press Dimter PROFIPRESS L2500 (2007)

Dimter PROFIPRESS L2500

Lamination press
Manufacturer: Dimter
Type: PROFIPRESS L2500
Year of manufacture: 2007
Technical data
Wood dimensions to be processed
Wood width, panels: 30 - 150 mm
Wood thickness: 11 - 60 mm
Wood inlet length: 800 - 2500 mm
Panel widths, variable: max. 1300 mm
Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2
The pressing surface per press cycle must not be smaller than 100 cm2
Filling width of the press per cycle: min. 650 mm / max. 1300 mm
Max. filling area of the press per cycle: 3.25 m2
(The max. usable press width depends on the widths of the individual lamellas.)
Wood type
Softwood/hardwood
Press without options
Electrical connection, press: 7 kW
Electrical connection, 40 kW generator: 56 kW
Operating voltage: approx. 400 Volt / 50 Hz (C/s)
Collection table extended to 3700 x 1300 mm, with stainless steel wood support
Motor-driven multi-function slider
Lamination press Profipress L 2500
Press bed area approx. 2500 x 1300 mm
Sturdy base frame with lower press table made of stainless steel as a grounding electrode
Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width
Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances
In multi-lane operation, filling widths may vary by a maximum of 15 mm
Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement
Integrated hydraulic unit for generating pressing force and driving the hydraulic motors
Control cabinet and control panel
Protective cladding
Additional individual pressure elements from above
Automatic gluing station with precision gluing head
Infeed for different widths
Camera
Washing and rinsing device for gluing head
Modem incl. software for online connection
Ibodpfx Ahezuzwqs Eea
Note:
The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

The listing was translated automatically. Translation errors are possible.