Condition: used, Year of construction: 2012, Overview This craft brewery system was manufactured in 2012 by Slowbeer and other manufacturers. The system is designed for beer production and includes brewhouse, fermentation vessels, milling equipment, and temperature control units. The machines are described as in very good condition with low operating usage. Technical data Capacity: 250 L brewhouse Application: Beer production Configuration: Brewhouse, multiple fermenters, malt mill, heating and cooling unit Scope of Delivery  Brewhouse | Slowbeer | MB 250E | 2012 | 250 L brewhouse system Fermenter | 2012 | 500 L stainless steel fermenter with CIP system Fermenter | 2012 | 2 × 1,200 L isobaric conical fermenters Fermenter | 2012 | 1,200 L isobaric flat-bottom fermenter Malt mill | Sommer | Piccolo 11S | 2012 | Capacity 100–150 kg/h with support frame and hopper Heating and cooling unit | Winus | Model M | 2012 | Control unit with 4 digital thermostats for up to 10,000 L Pump | 2012 | Transfer and cleaning pump with inverter Itedpfxey Sic Sj Ahqjg

Condition: used, Year of construction: 2006, Overview This Tetra Pak Tetra Fino Aseptic filling line, manufactured in 2006, is designed for the filling of UHT milk and other liquid food products in pillow-shaped aseptic cartons (Tetra Fino® 1000 ml format). The system enables aseptic filling of ultra-pasteurized products, allowing extended shelf life without refrigeration. With a capacity of approx. 3,600 packs per hour, the line is suitable for small to medium-capacity dairy production. The line consists of a bag forming and filling machine, conveyor systems, and a carton closing module, with manual packing into boxes. The equipment is currently in production and reported to be in good condition. Technical data Manufacturer: Tetra Pak Machine type: Aseptic carton filling line (pillow pack) Format: Tetra Fino Aseptic 1000 ml Year of manufacture: 2006 Operating hours: approx. 18,625 h Capacity: approx. 3,600 packs/h Filling stations: 1 Filling system: tbc Filling type: Aseptic filling Product: UHT milk (example: 137°C / 4 sec) Suitable for liquid food products Equipment Aseptic filling machine (bag forming from roll) Conveyor system for package transport Conveyor system for carton handling Manual packing station (bags into cartons) Automatic carton closing module (SOCO System, year 2014, approx. 740 h) 1 m mesh conveyor (outfeed for full cartons) Roll handling trolley (for heavy packaging rolls) Aseptic filling valves (ABC Valve) Iedpfxsy Sh Tvo Ahqetg

Condition: used, Year of construction: 1994, Model: CookStar CKH400/8/130 Year of manufacture: 1994 Condition: Used Serial number: 138 Stock number: 3341G Belt width: 400 mm Description: Equipped with belt water pump and CIP system Rows: 2 x 4 units Belt length: 44 m Product opening: 130 mm Dwell time: 2.5 - 75 min Itjdpfxsy R Tiao Ahqeg Temperature: max. 200 °C Heating: thermal oil, 300 kW Extraction: 2 x 2000 m³/h Steam: NW40, 4 - 8 Bar Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 35kW Dimensions: 8250 x 3150 x 4250 mm Weight: 12000 kg

Condition: used, Year of construction: 2006, Manufacturer: Kronen Model: GEWA 3800 V Year: 2006 Condition: Used Serial number: 379 Stock number: 3368 Capacity: max. 1800 kg/h Water inlet: 2 3/4" Water outlet: 2 x 2" Infeed height: 1103 mm Itjdsy R S R Nspfx Ahqeg Discharge height: 771 mm Power: 3 x 400V, 50Hz, 5.9kW Dimensions: 3807 x 991 x 1500 mm Weight: 583 kg

Condition: used, Year of construction: 1998, Manufacturer: CFS Model: HLT10000/1000 Year: 1998 Condition: Used Serial number: 230 Stock number: 3372B Iodpey R S Hqefx Ahqjtg Belt width: 1000 mm Fryer length: 9000 mm Heating: thermal oil, 360 kW Steam: 4 - 8 Bar Compressed air: 2 - 4 Bar Power supply: 3 x 400V, 50Hz, 30kW Dimensions: 12600 x 2100 x 3400 mm Weight: 10000 kg

Condition: new, Year: 2023 Condition: Used Serial Number: 273-00-129 Stock Number: 2948 Cutting diameter: max. 200 x 180 mm Description: Includes extra blade Chamber length: 720 mm Thickness: 1 - 30 mm Speed: 210 / 420 cuts per minute Itedpfoyz Sxhjx Ahqog Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2100 x 900 x 1200 mm Weight: 320 kg

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen all stainless steel Iodpfx Ahey Ryt Ejqstg belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm 12 kW product height: max. ± 120 mm

Condition: used, Specialty oven for potato products. Perfectly suitable to fry formed potato mash products, potato croquettes or hash brown in all kinds of shapes made of potato slivers, potato noisettes, cone croquettes, pommes dauphines, pommes duchesses, chips (French fries), … Zonal Flow Principle 3-point oil flow control Net belt width ± 1.400 mm Net belt length ± 9.000 mm Iedpfx Ahsy Rytxjqetg External heat exchanger: Not included Electromechanical hood lift Mesh opening 3mm (stainless steel wire eye belt) Oil level control Product height max.: ± 120 mm Inlet height: ± 1.650 mm Outlet height: ± 1.500 mm Adjustable height of upper belt with drivers Suitable for CIP Suitable for Fire protection Inspection hatches at the top of the hood Insulated hood 1 exhaust chimney Dimensions (L x W x H): 12.500 x 2.580 x 2.470 mm (closed position, top of hood, without extraction) Filter station with belt filter Oil pump Cornell 5RB-F16K 35 m³/h, Oil temperature 180°C 37 kW, 1,482 RPM 400V-50Hz IE3-CoS, 0.83% Dimensions (L x W x H): 3.200 x 2.300 x 2.000 mm + Blackmer NP3F Pump for emptying fryer SEW 3kW 220 - 400 V 258 RPM 50 Hz, 6.2A IE2-CoS 0.82%

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm Iodey Rytlepfx Ahqstg belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: used, continuous grilling line Itsdpfx Ajy Ryr Uehqjg all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A Isdpfxoy Ryr Ie Ahqjtg dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Isdpfxohn S Efo Ahqetg Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm One side at wheels

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Capacity: 20000 l/h Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Iodpfxoy Ti Ano Ahqstg Material: stainless steel Position: mounted on stainless steel frame with feet Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping

Condition: used, CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings Additional title: Cleaning system with 5 vessels Material: vessels from stainless steel Position: vessels standing on 3 feet each Base construction: flatconical vessels Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterfly valves; pipe panels various other valves, pipework and fittings Itodpfx Aoy Tizwshqjg

Condition: used, 2-vessel stainless steel brewhouse (beraplan, 1997), mounted on a stainless steel frame with a work platform. The brewhouse comprises the following components: - Mash/wort kettle, steam heated, with propeller agitator, mashing nozzle, CIP head and 4 hop dosing hoppers. - Lauter tun with slotted false bottom, rake, spray heads and spent grain pump - Whirlpool as a separate stainless steel vessel (gross volume: 48 hl, manufactured by C. Gresser, 1978) - Two-stage plate heat exchanger (GEA Ecoflex) used as a wort cooler with wort aeration - Spindle station - Control console (Siemens) with buttons and screen for visualising the brewing process. - Control cabinet with S5 module and various other control and regulation elements. - Various other pipework, pumps, valves, measurement and control technology Additional title: Stainless steel brewhouse with a wort discharge capacity of 35 hl, built between Cast wort capacity: 3500 l Iodpfx Aoy Tiytehqstg Operation / Control: Simatic S5-100U Features: Mash tun; lauter tun; whirlpool; wort cooler; wort areation; spindle station; control console; control cabinet; various pipes, pumps, valves, measurement and control equipment

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Itodpfx Ahswkfwpeqjg

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor. Itodpfx Aowizc Eehqjg

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  Capacity: 10,000 bottles per hour Formats: 1,0 l PET bottles 0,5 l PET bottles 0,33 l PET bottles Working direction: Clockwise Rinsing system: 36 rinsing nozzles 2 channel rinser With stainless steel pipes Filling system: Isobaric system 36 filling valves Capping system Manufacturer: Arol 9 capping heads With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps Dimension Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  Rinser, filler, capper in triblock construction Vacuum barrier system Stainless steel CIP cups Cap feeding system Itsdpswiy Tvefx Ahqjg

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C & 1500bph 15°C Currently set up for: Glass Bottles: 0,187ml 0,375ml 0,750ml 1500ml  Caps/Corks Cork (boucheuse liège) Screw cap Decorative Cap (Champagne style) Incl. CIP and wine filtration Isdpfx Asv Aag Djhqstg

Condition: used, Year of construction: 2008, Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | - Itsdpfx Aevzymhehqjg

Condition: used, Year of construction: 2015, Overview This CHM MPR automatic palletizer was manufactured in 2015 and was last used for repalletizing Euro pallets onto smaller pallets. The machine has an empty pallet magazine and automatic feeding of the empty pallets. Technical details  Last output: 3-4 pallets/h (low speed due to the distance for manual order picking between palletizer and wrapper, can handle significantly more) Equipment: Feeding of empty pallets (80x60, 93x80) Empty pallet magazine Feeding of empty pallets (Euro pallet, Industrial pallet, CP1 pallet) Integrated compressor Pressure: 6 bar Voltage: 400 V Frequency: 50 Hz Additionally available: Roller conveyor Itedpfx Asvyp Aishqsg

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Itedpfx Asvxtavjhqsg

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Ijdpfx Asvrfivshqetg

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  Brewhouse capacity: 250 liters per batch Production cycle: approx. 2 weeks per batch Bottling cycle: 1 day per batch Production months/year: 10 months Shelf life of beer: 18 months Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) Fermentation tank capacity: 500 liters each (3 tanks) Brewing system power: 15 kW Cooling system power: 2.3 kW Labeling power: 2 kW Scope of Delivery  1 x Brewing Unit | SlowBeer | MB 250 E | 2013 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 1 x Labelling Machine | CDA | R1000 | — 1 x Filling Machine | Toscana | — | — 1 x Manual Capping Machine | — | P0085 | — 1 x Coder | — | MC150V | 2013 1 x Electric Mill | SOMMER | 11717 | — 1 x Compressor | FINI | — | — 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) 1 x Steel Water Heating Tank | — | — | — (900 L) 2 x Water Softeners | — | — | — 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Optional Services: Dismantling, transport, and installation – available upon request.   Isdpfx Ahjwcyc Dsqetg

Condition: used, Year of construction: 2014, Overview  This capsule machine was manufactured by CIRIO GERMANO in 2014. The machine has 6 heads and is designed for processing thermal shrink capsules. Technical details  Manufacturer: CIRIO GERMANO Model: MONOBLOCCO 6 TERMICHE Year of manufacture: 2014 Serial number: 14-018 Number of heads: 6 Capsule type: PVC shrink capsules Function: Automatic capsule feeding & thermal shrinking Itodpfov Tp E Rjx Ahqsg