Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 83321 Fpsdpju N Hybofx Aatei Stainless centrifugal pump, 30Kw motor, 3Ph

Condition: good (used), Kecol Maxiprime 800 drum pump Stainless, pneumatically operated, 130L per min, up to 12mm solids, previously used for pumping fruit juices out of tote bins Fedpfx Aaou S Rkmjtopi

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 39398 Fjdpsu N Hv Nefx Aatepi Stainless centrifugal pump, 30Kw motor, 3Ph

Condition: good (used), Ibex Pump Lobe pump Fpjdpfxof Ecr Ss Aatei Model: SR/4 Serial: 930590/01 Stainless lobe pump on frame, 50mm inlet and outlet pipe, 3Kw motor, 3Ph

Condition: used, 2 x "Inotec" Twin shaft paddle mixer 2.600L Type IPM 2000 all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard with weighing cells 18 kW in very good condition in good working order + 2 x Outfeed conveyor belt” Type IFB 1300/800 all stainless steel comes under the discharge guards of the mixer plastic belt 0,7 kW Fodpfezk Dzkox Aatopi outfeed height ± 1.200 mm in a eurobin / Dolav in very good condition in good working order + 2 x Loader for eurobins Type IHV 2000-300 all stainless steel for 200L or 300 L eurobins dimensions: (L x W x H): ± 900 x 1.300 x 4.020 mm 1,6 kW in good condition in good working order + Elevating spiral screw with infeed belt Elevating spiral screw Type IFS 5600/400 all stainless steel mobile 5,3 kW screw diameter 400 mm Loading height 800 mm Unloading height 3.200 mm dimensions: (L x W x H): ± 5.200 x 2.500 x 4.450mm in very good condition in working order + Infeed belt all stainless steel white pvc belt belt width 700 mm belt length 2.500 mm Unloading height 2.800 mm in good condition in good working order + control box Type IPL 05-02-N Total 58 kW 3x 400V -50Hz 98A Year of construction 2003 dimensions: (lxwxh) : ± 1,800 x 550 x 1,800 mm PLC control system Siemens S7-300 + Simatic panel OP270 + inspection platform The machines will be fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed Fodpfx Aozk Dytoatepi product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg

Condition: used, Specialty oven for potato products. Fedpfxezk Dyms Aatopi Perfectly suitable to fry formed potato mash products, potato croquettes or hash brown in all kinds of shapes made of potato slivers, potato noisettes, cone croquettes, pommes dauphines, pommes duchesses, chips (French fries), … Zonal Flow Principle 3-point oil flow control Net belt width ± 1.400 mm Net belt length ± 9.000 mm External heat exchanger: Not included Electromechanical hood lift Mesh opening 3mm (stainless steel wire eye belt) Oil level control Product height max.: ± 120 mm Inlet height: ± 1.650 mm Outlet height: ± 1.500 mm Adjustable height of upper belt with drivers Suitable for CIP Suitable for Fire protection Inspection hatches at the top of the hood Insulated hood 1 exhaust chimney Dimensions (L x W x H): 12.500 x 2.580 x 2.470 mm (closed position, top of hood, without extraction) Filter station with belt filter Oil pump Cornell 5RB-F16K 35 m³/h, Oil temperature 180°C 37 kW, 1,482 RPM 400V-50Hz IE3-CoS, 0.83% Dimensions (L x W x H): 3.200 x 2.300 x 2.000 mm + Blackmer NP3F Pump for emptying fryer SEW 3kW 220 - 400 V 258 RPM 50 Hz, 6.2A IE2-CoS 0.82%

Condition: used, continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed Fpedpfezk Dx Aex Aatsi overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Fpedozk Dxiopfx Aatei Max. slice thickness: 0,5 – 25 mm Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm + Scale + Insert belt

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 6.000 mm nett belt width 600 mm adjustable speed sediment removal system filter mechanical hoists Fpedpfozk Dxcsx Aatji overall dimensions (l x w x h) : ± 7.700 x 2.200 x 2.200 mm with oil circulation pump

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one. Fpjdpfx Aozi Em Ssatei

Condition: excellent (used), We have two identical lines for sale direct from factory which closed in June 2026. All machines in beautiful condition and in operation until two weeks ago. Fsdpfx Aaozi El Ustspi

Condition: used, all stainless steel belt width 400 mm mobile Fpsdjzkt Aqepfx Aatei adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm adjustable speed mobile Fjdpszktz Hefx Aatspi as new

Condition: used, net length ± 18.300 mm net width ± 1.800 mm max. product height ± 85 mm 3 evaporators motor compressors not included (required capacity ± 224 kW) dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm evaporation temperature: - 42°C Fedozktztopfx Aatopi medium : ammonia/freon capacity 1.500-2.000 kg/h (depending on the product) machine is modular and can be shortened by ± 1/3.

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable Fsdpfxozktzao Aatopi nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists Fjdpfxozkty Ne Aatjpi suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. Fedszk U Hkepfx Aatopi According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) Fodezk U E Tspfx Aatjpi - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Year of construction: 2021, Overview This compact canning line combines a Wild Goose Quick Change Gosling semi-automatic can filler, a Zomerdijk TWIST can rinser and a Crafted Goose EME automatic labeller (type JE-1100/185-S2) with a Cyklop CM220 thermal inkjet printer. Built in 2021 (filler and labeller), the line runs at up to 600 cans/hour and is compatible with 0.33 L, 0.44 L and 0.5 L can formats (currently tooled for 0.44 L cans). The filler is mounted on a wheeled base frame and includes DO buster and CO₂ regulation equipment as well as low- and high-flow foam control for beers above 4.2 g CO₂/L. The filler's production counter reads approx. 35,000 fill cycles - light craft-scale use. The line is still installed and under power, and can be viewed on request. Fodpfx Aaszk U Eyjtopi Technical data - Line type: Small canning line (filler + rinser + labeller) - Capacity: 600 cans/hour - Can formats: 0.33 L / 0.44 L / 0.5 L (currently tooled for 0.44 L) - Filler type: Semi-automatic - Filler electrical supply: 230 V single-phase, 50/60 Hz, 8 A - Foam control: low- and high-flow, for beer >4.2 g CO₂/L - Labeller: EME type JE-1100/185-S2, automatic, with Cyklop CM220 thermal inkjet printer - Recorded use: approx. 35,000 fill cycles (production counter) - Year of manufacture: 2021 (filler and labeller) Scope of Delivery - Can Filler | Wild Goose | Quick Change Gosling | Semi-automatic; wheeled base frame; DO buster and CO₂ regulation; low- and high-flow foam control; tools and basic spare parts kit; format kits for 0.33/0.44/0.50 L cans | 2021 - Can Rinser | Zomerdijk Engineering | TWIST | Infeed buffer on stand, 2 rinse cages, post-rinse collection table; for 0.33/0.44/0.50 L cans - Labeller + Printer | EME (Crafted Goose) | JE-1100/185-S2 | Automatic label application; Cyklop CM220 thermal inkjet coder | 2021 Condition Used - light craft-scale use; still installed and under power at the seller's site. The line can be visited and demonstrated on request. Availability Available now. Location: Spain.

Condition: used, Year of construction: 2006, Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm Fjdpszk I N Sjfx Aatspi - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2016, Overview This CEEM TSS-1845 is a fully automatic side-seal shrink-wrapping machine with an integrated shrink tunnel, built in 2016. Products are fed on the conveyor, wrapped in transparent shrink film with a continuous side seal, and passed through the heat-shrink tunnel to form a tight, retail-ready transparent pack. The machine handles single items as well as grouped products. The side-seal unit is manufactured by Alpha Pack Europe (Italy) as model APSS-5022 and supplied under the Spanish CEEM brand (Grupo CEEM Packaging S.A., Elche). A constant-temperature thermal system provides uninterrupted sealing; product changeovers are made simply by turning the hand-wheels, without changing product guides, and product-length sensors allow automatic length control via the touch-panel control. The machine is still installed and under power and can be inspected on site. Technical data Fjdpfxozk H Nke Aatspi - Manufacturer: CEEM - Grupo CEEM Packaging S.A. (Elche, Alicante, Spain) - Model: TSS-1845 (side-seal unit OEM: Alpha Pack Europe APSS-5022) - Year of manufacture: 2016 - Machine type: fully automatic side-seal shrink-wrapping machine with shrink tunnel - Applicable film: POF / PE / PVC, thickness 0.05 - 0.08 mm - Max. sealing width: 500 mm - Max. product height: 220 mm - Packing speed: 30 - 45 packs/min - Conveyor speed: up to 30 m/min - Film reel: outer Ø up to 400 mm, core Ø 75 mm - Power: approx. 3 kW, 380 V - Compressed air: 5 - 6 bar - Weight: approx. 850 kg (side-seal unit; shrink tunnel additional) - Side-seal unit dimensions: approx. 2,100 x 1,960 x H 1,900 mm (excl. tunnel) Equipment - Automatic side-seal sealer with motorized film unwind and continuous side sealing - Heat-shrink tunnel with adjustable temperature control - Touch-panel control, hand-wheel format changeover, product-length sensors - Infeed conveyor Condition Used - in very good, clean condition; still installed and under power at the current site and available for inspection on request. Availability Immediately. Location: Spain. Dismantling, handling and truck loading can be quoted on request (EXW). The machine can be visited on request.

Condition: new, Year of construction: 2022, Celsius Food food-grade baking oven Baking temperature range: 50 to 260 degrees Ref: ConduVec 12.10 E Fjdpfx Aaexu Rk Tstopi The oven has never been used and is still in its original packaging.

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Fpsdozk Eqmepfx Aatei Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 Fodpezkg N Dsfx Aatspi electric power : 26 kW 400V