Used Hurlimann H-6190 Master for sale (56,263)

Year of construction: 2022, operating hours: 6,100 h, condition: excellent (used), functionality: fully functional, Year 2022 6100 Hrs CAT 4.4 Tier 3A Gjdpfx Age Adly Eolekd No Adblue / EGR 16 x 5 Two Deck Screenbox 50mm Punch Plate Top Deck & 15mm Square Mesh 32,500 kgs Excellent Condition Ready To Go To Work

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing Gkodpfo Ah Hgzox Agled A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. This equipment is being sold Ex-Works, with the buyer responsible for packing & shipping. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Gjdpfx Aez Smqksglekd Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Year of construction: 2000, condition: used, functionality: fully functional, APV CurdMaster 22,000 Litre Cheese Vat Manufacturer: APV Model: CurdMaster Capacity: 22,000 litres Machine Type: Industrial Cheese Vat / Curd-Making Vat Application: Cheese Production / Dairy Processing Condition: Used Location: Ireland APV CurdMaster 22,000 litre cheese vats designed for high-volume industrial cheese production. The CurdMaster system is designed for the controlled processing of milk during cheese manufacture, providing a large-capacity vessel for coagulation, curd formation and subsequent cheese-making operations. With an 22,000 litre working capacity, these vats are suited to large-scale dairy and cheese-processing facilities and can form part of an integrated automated cheese production line. APV is an established supplier of equipment for the dairy and food-processing industries, and CurdMaster systems have been used extensively in commercial cheese manufacturing applications. Key Features -22,000 litre capacity -Industrial-scale cheese production -Designed for milk coagulation and curd formation -Suitable for large-volume dairy processing -Heavy-duty stainless-steel construction -Hygienic food-processing design -Suitable for integration into automated cheese production lines -APV-manufactured equipment -Suitable for a range of cheese production applications -Available for inspection Gkodozy Rmropfx Agled Keywords APV CurdMaster, APV cheese vat, 22,000 litre cheese vat, 22,000L cheese vat, industrial cheese vat, cheese making vat, curd vat, cheese production equipment, dairy processing equipment, cheese manufacturing equipment, APV dairy equipment, stainless steel cheese vat, industrial dairy equipment, cheese processing machinery, used cheese equipment, used dairy equipment, Ireland, Europe

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,258 h, load capacity: 2,000 kg, lifting height: 8,050 mm, free lift: 2,835 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,750 mm, motor manufacturer: ELECTRIC, gearing type: converter, battery capacity: 930 Ah, remaining battery capacity: 82 %, battery voltage: 48 V, battery weight: 1,320 kg, fork carriage width: 920 mm, fork length: 1,150 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 413 X 178 X 285,8, rear tire type: superelastic tires (non-marking), rear tire size: 16 X 9 X 12 1/8, overall weight: 9,500 kg, empty load weight: 7,500 kg, total height: 2,250 mm, total length: 2,750 mm, total width: 1,400 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, fork extension, front guard, head guard, lighting, pallet forks, sideshift, 🏗️ AISLE MASTER 20WHE | ELECTRIC | 2000 KG | TRIPLEX 8050 MM | FREE LIFT 2835 MM | SIDESHIFT | 48V 930AH BATTERY >80% | CHARGER INCLUDED ⚡ ARTICULATED FORKLIFT FOR VERY NARROW AISLES | FULL SERVICE | WARRANTY | READY TO WORK | WORLDWIDE DELIVERY 🌍 We offer a 2018 AISLE MASTER 20WHE electric articulated forklift, designed for very narrow aisles and high-bay warehouses. Its articulated design provides excellent maneuverability between racking and allows significantly narrower working aisles compared with conventional counterbalance forklifts. With an overall width of only 1400 mm and a lifting height of 8050 mm, it enables maximum use of warehouse space, both horizontally and vertically. ⚙️ TECHNICAL SPECIFICATION • Manufacturer: AISLE MASTER • Model: 20WHE • Type: Articulated / Very Narrow Aisle Forklift • Year: 05/2018 • Serial number: 39882 • Power: Electric • Operating hours: 6258 h • Lifting capacity: 2000 kg • Machine weight: 7500 kg • Mast: TRIPLEX • Lifting height: 8050 mm • Free lift: 2835 mm • Forklift height: 2250 mm • Closed mast height: 3750 mm • Overall length: 2750 mm • Overall width: 1400 mm • Carriage width: 920 mm • Forks: 1150 × 100 × 40 mm • Hydraulic sideshift: YES • Fork positioner: NO • Cabin: Open • Platform: None Gsdpfxe Ahwlpo Agljkd 🔋 BATTERY & CHARGER The forklift is equipped with a heavy-duty 48 V / 930 Ah traction battery weighing approximately 1320 kg. The battery is fully operational, professionally reconditioned, and has a tested capacity of over 80%. 💰 THE PRICE INCLUDES THE COMPLETE SET: • AISLE MASTER 20WHE forklift • Reconditioned 48 V / 930 Ah battery – capacity >80% • Three-phase battery charger The machine is therefore supplied as a complete, ready-to-use package with no need to purchase a separate battery or charger. 🛞 TIRES • Front: Superelastic 413 × 178 × 255.8 – approx. 100% • Rear: Superelastic 406 × 95 × 12 – approx. 100% 🛠️ EQUIPMENT • TRIPLEX mast • Hydraulic sideshift • Full free lift • Work lights • Warning beacon • Oscillating axle • Superelastic tires • Open operator cabin • Reconditioned traction battery • Three-phase charger 🔧 PROFESSIONALLY PREPARED FOR WORK Before sale, the forklift undergoes a comprehensive inspection in our own service center. We check the electric drive, battery, hydraulics, mast, chains, rollers, articulated mechanism, steering, brakes, and all operating functions. The machine also undergoes a load test and is prepared for immediate professional operation. 🏭 APPLICATION Ideal for very narrow aisle and high-bay warehouses, logistics and distribution centers, production facilities, and pallet storage. The articulated design allows maximum use of available warehouse capacity while maintaining excellent maneuverability. 🌍 TRANSPORT & SALES We organize professional transport throughout Europe and worldwide, including direct delivery, export documentation, and assistance with international transport formalities. ✅ FULL SERVICE & INSPECTION | 🔋 BATTERY >80% | 🔌 3-PHASE CHARGER INCLUDED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | READY TO WORK

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,258 h, load capacity: 2,000 kg, lifting height: 8,050 mm, free lift: 2,835 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,750 mm, motor manufacturer: ELECTRIC, gearing type: converter, battery capacity: 930 Ah, remaining battery capacity: 82 %, battery voltage: 48 V, battery weight: 1,320 kg, fork carriage width: 920 mm, fork length: 1,150 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 413 X 178 X 285,8, rear tire type: superelastic tires (non-marking), rear tire size: 16 X 9 X 12 1/8, overall weight: 9,500 kg, empty load weight: 7,500 kg, total height: 2,250 mm, total length: 2,750 mm, total width: 1,400 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, fork extension, front guard, head guard, lighting, pallet forks, sideshift, 🏗️ AISLE MASTER 20WHE | ELECTRIC | 2000 KG | TRIPLEX 8050 MM | FREE LIFT 2835 MM | SIDESHIFT | 48V 930AH BATTERY >80% | CHARGER INCLUDED ⚡ ARTICULATED FORKLIFT FOR VERY NARROW AISLES | FULL SERVICE | WARRANTY | READY TO WORK | WORLDWIDE DELIVERY 🌍 We offer a 2018 AISLE MASTER 20WHE electric articulated forklift, designed for very narrow aisles and high-bay warehouses. Its articulated design provides excellent maneuverability between racking and allows significantly narrower working aisles compared with conventional counterbalance forklifts. With an overall width of only 1400 mm and a lifting height of 8050 mm, it enables maximum use of warehouse space, both horizontally and vertically. ⚙️ TECHNICAL SPECIFICATION • Manufacturer: AISLE MASTER • Model: 20WHE • Type: Articulated / Very Narrow Aisle Forklift • Year: 05/2018 • Serial number: 39882 • Power: Electric • Operating hours: 6258 h • Lifting capacity: 2000 kg • Machine weight: 7500 kg • Mast: TRIPLEX • Lifting height: 8050 mm • Free lift: 2835 mm • Forklift height: 2250 mm • Closed mast height: 3750 mm • Overall length: 2750 mm • Overall width: 1400 mm • Carriage width: 920 mm • Forks: 1150 × 100 × 40 mm • Hydraulic sideshift: YES • Fork positioner: NO • Cabin: Open • Platform: None 🔋 BATTERY & CHARGER The forklift is equipped with a heavy-duty 48 V / 930 Ah traction battery weighing approximately 1320 kg. The battery is fully operational, professionally reconditioned, and has a tested capacity of over 80%. 💰 THE PRICE INCLUDES THE COMPLETE SET: • AISLE MASTER 20WHE forklift • Reconditioned 48 V / 930 Ah battery – capacity >80% • Three-phase battery charger The machine is therefore supplied as a complete, ready-to-use package with no need to purchase a separate battery or charger. 🛞 TIRES • Front: Superelastic 413 × 178 × 255.8 – approx. 100% • Rear: Superelastic 406 × 95 × 12 – approx. 100% Gksdpfxe Aglnfj Agljd 🛠️ EQUIPMENT • TRIPLEX mast • Hydraulic sideshift • Full free lift • Work lights • Warning beacon • Oscillating axle • Superelastic tires • Open operator cabin • Reconditioned traction battery • Three-phase charger 🔧 PROFESSIONALLY PREPARED FOR WORK Before sale, the forklift undergoes a comprehensive inspection in our own service center. We check the electric drive, battery, hydraulics, mast, chains, rollers, articulated mechanism, steering, brakes, and all operating functions. The machine also undergoes a load test and is prepared for immediate professional operation. 🏭 APPLICATION Ideal for very narrow aisle and high-bay warehouses, logistics and distribution centers, production facilities, and pallet storage. The articulated design allows maximum use of available warehouse capacity while maintaining excellent maneuverability. 🌍 TRANSPORT & SALES We organize professional transport throughout Europe and worldwide, including direct delivery, export documentation, and assistance with international transport formalities. ✅ FULL SERVICE & INSPECTION | 🔋 BATTERY >80% | 🔌 3-PHASE CHARGER INCLUDED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | READY TO WORK

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,258 h, load capacity: 2,000 kg, lifting height: 8,050 mm, free lift: 2,835 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,750 mm, motor manufacturer: ELECTRIC, gearing type: converter, battery capacity: 930 Ah, remaining battery capacity: 82 %, battery voltage: 48 V, battery weight: 1,320 kg, fork carriage width: 920 mm, fork length: 1,150 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 413 X 178 X 285,8, rear tire type: superelastic tires (non-marking), rear tire size: 16 X 9 X 12 1/8, overall weight: 9,500 kg, empty load weight: 7,500 kg, total height: 2,250 mm, total length: 2,750 mm, total width: 1,400 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, fork extension, front guard, head guard, lighting, pallet forks, sideshift, 🏗️ AISLE MASTER 20WHE | ELECTRIC | 2000 KG | TRIPLEX 8050 MM | FREE LIFT 2835 MM | SIDESHIFT | 48V 930AH BATTERY >80% | CHARGER INCLUDED ⚡ ARTICULATED FORKLIFT FOR VERY NARROW AISLES | FULL SERVICE | WARRANTY | READY TO WORK | WORLDWIDE DELIVERY 🌍 We offer a 2018 AISLE MASTER 20WHE electric articulated forklift, designed for very narrow aisles and high-bay warehouses. Its articulated design provides excellent maneuverability between racking and allows significantly narrower working aisles compared with conventional counterbalance forklifts. With an overall width of only 1400 mm and a lifting height of 8050 mm, it enables maximum use of warehouse space, both horizontally and vertically. ⚙️ TECHNICAL SPECIFICATION • Manufacturer: AISLE MASTER • Model: 20WHE • Type: Articulated / Very Narrow Aisle Forklift • Year: 05/2018 • Serial number: 39882 • Power: Electric • Operating hours: 6258 h • Lifting capacity: 2000 kg • Machine weight: 7500 kg • Mast: TRIPLEX • Lifting height: 8050 mm • Free lift: 2835 mm • Forklift height: 2250 mm • Closed mast height: 3750 mm • Overall length: 2750 mm • Overall width: 1400 mm • Carriage width: 920 mm • Forks: 1150 × 100 × 40 mm • Hydraulic sideshift: YES • Fork positioner: NO • Cabin: Open • Platform: None 🔋 BATTERY & CHARGER The forklift is equipped with a heavy-duty 48 V / 930 Ah traction battery weighing approximately 1320 kg. The battery is fully operational, professionally reconditioned, and has a tested capacity of over 80%. 💰 THE PRICE INCLUDES THE COMPLETE SET: • AISLE MASTER 20WHE forklift • Reconditioned 48 V / 930 Ah battery – capacity >80% • Three-phase battery charger Gkjdj Aa Ixijpfx Agled The machine is therefore supplied as a complete, ready-to-use package with no need to purchase a separate battery or charger. 🛞 TIRES • Front: Superelastic 413 × 178 × 255.8 – approx. 100% • Rear: Superelastic 406 × 95 × 12 – approx. 100% 🛠️ EQUIPMENT • TRIPLEX mast • Hydraulic sideshift • Full free lift • Work lights • Warning beacon • Oscillating axle • Superelastic tires • Open operator cabin • Reconditioned traction battery • Three-phase charger 🔧 PROFESSIONALLY PREPARED FOR WORK Before sale, the forklift undergoes a comprehensive inspection in our own service center. We check the electric drive, battery, hydraulics, mast, chains, rollers, articulated mechanism, steering, brakes, and all operating functions. The machine also undergoes a load test and is prepared for immediate professional operation. 🏭 APPLICATION Ideal for very narrow aisle and high-bay warehouses, logistics and distribution centers, production facilities, and pallet storage. The articulated design allows maximum use of available warehouse capacity while maintaining excellent maneuverability. 🌍 TRANSPORT & SALES We organize professional transport throughout Europe and worldwide, including direct delivery, export documentation, and assistance with international transport formalities. ✅ FULL SERVICE & INSPECTION | 🔋 BATTERY >80% | 🔌 3-PHASE CHARGER INCLUDED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | READY TO WORK

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,808 h, load capacity: 2,000 kg, lifting height: 6,000 mm, free lift: 1,965 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, motor manufacturer: ELECTRIC, gearing type: converter, battery capacity: 775 Ah, remaining battery capacity: 85 %, battery voltage: 48 V, battery weight: 1,134 kg, fork carriage width: 1,000 mm, fork length: 1,150 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 16 1/4 X 7 X 11 1/4, rear tire type: superelastic tires (non-marking), rear tire size: 16 X 9 X 12 1/8, overall weight: 9,500 kg, empty load weight: 7,500 kg, total height: 2,250 mm, total length: 2,700 mm, total width: 1,450 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, fork extension, front guard, head guard, lighting, pallet forks, sideshift, 🏗️ AISLE MASTER 20WE | ELECTRIC | 2000 KG | TRIPLEX 6000 MM | FREE LIFT 1965 MM | SIDESHIFT | 48V 775AH BATTERY | 2019 | READY TO WORK ⚡ ARTICULATED FORKLIFT FOR VERY NARROW AISLES | FULL SERVICE | WARRANTY | BATTERY & CHARGER | WORLDWIDE DELIVERY 🌍 Gkjdps Ahwl Tjfx Aglsd We offer a 2019 AISLE MASTER 20WE electric articulated forklift designed for very narrow aisles, high-bay warehouses, and maximum utilization of storage space. Its articulated design provides excellent maneuverability and allows operation in significantly narrower aisles than conventional counterbalance forklifts. The machine offers a 2000 kg capacity, a TRIPLEX mast with a 6000 mm lifting height, 1965 mm full free lift, hydraulic sideshift, and an overall width of only 1450 mm. With just 1808 operating hours, it is a low-hour machine ready for professional use. ⚙️ TECHNICAL SPECIFICATION • Manufacturer: AISLE MASTER • Model: 20WE • Type: Articulated / Very Narrow Aisle forklift • Year: 02/2019 • Serial No.: 44378 • Power: Electric • Operating hours: 1808 h • Capacity: 2000 kg • Machine weight: 7500 kg • Mast: TRIPLEX • Lifting height: 6000 mm • Free lift: 1965 mm • Closed mast height: 2865 mm • Forklift height: 2250 mm • Length: 2700 mm • Width: 1450 mm • Carriage width: 1000 mm • Forks: 1150 × 100 × 40 mm • Sideshift: YES • Fork positioner: NO • Cabin: Open • Platform: None 🔋 BATTERY • Voltage: 48 V • Capacity: 775 Ah • Weight: 1134 kg • Battery inspected and reconditioned • Charger included The electric drive ensures quiet, smooth, and precise operation with zero exhaust emissions, ideal for indoor warehouse, production, and logistics applications. 🛞 TIRES • Front: Superelastic – approx. 100% • Rear: Superelastic – approx. 100% 🛠️ EQUIPMENT • TRIPLEX 6000 mm mast • Full free lift 1965 mm • Hydraulic sideshift • Electric drive • 48 V / 775 Ah traction battery • Work lights • Warning beacon • Oscillating axle • Superelastic tires • Open operator cabin • Front windscreen • Forks 1150 × 100 × 40 mm 🔧 PROFESSIONALLY PREPARED FOR WORK Before sale, the forklift undergoes a comprehensive inspection in our own service center. We check the electric drive, traction battery, hydraulics, mast, chains, rollers, articulated mechanism, steering, brakes, and all operating functions. The machine also undergoes a load test and is prepared for immediate professional operation. 🏭 APPLICATION Ideal for very narrow aisle and high-bay warehouses, logistics and distribution centers, production facilities, and pallet storage. The combination of only 1450 mm overall width, articulated steering, and 6000 mm lifting height allows maximum utilization of warehouse space both horizontally and vertically. 🌍 TRANSPORT & SALES We organize professional transport throughout Europe and worldwide, including direct delivery to the customer's premises and assistance with export documentation and international transport formalities. ✅ FULL SERVICE & INSPECTION | 🔋 RECONDITIONED BATTERY | 🔌 CHARGER INCLUDED | 🏗️ LOAD TESTED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | READY TO WORK

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,808 h, load capacity: 2,000 kg, lifting height: 6,000 mm, free lift: 1,965 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, motor manufacturer: ELECTRIC, gearing type: converter, battery capacity: 775 Ah, remaining battery capacity: 85 %, battery voltage: 48 V, battery weight: 1,134 kg, fork carriage width: 1,000 mm, fork length: 1,150 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 16 1/4 X 7 X 11 1/4, rear tire type: superelastic tires (non-marking), rear tire size: 16 X 9 X 12 1/8, overall weight: 9,500 kg, empty load weight: 7,500 kg, total height: 2,250 mm, total length: 2,700 mm, total width: 1,450 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, fork extension, front guard, head guard, lighting, pallet forks, sideshift, 🏗️ AISLE MASTER 20WE | ELECTRIC | 2000 KG | TRIPLEX 6000 MM | FREE LIFT 1965 MM | SIDESHIFT | 48V 775AH BATTERY | 2019 | READY TO WORK ⚡ ARTICULATED FORKLIFT FOR VERY NARROW AISLES | FULL SERVICE | WARRANTY | BATTERY & CHARGER | WORLDWIDE DELIVERY 🌍 We offer a 2019 AISLE MASTER 20WE electric articulated forklift designed for very narrow aisles, high-bay warehouses, and maximum utilization of storage space. Its articulated design provides excellent maneuverability and allows operation in significantly narrower aisles than conventional counterbalance forklifts. The machine offers a 2000 kg capacity, a TRIPLEX mast with a 6000 mm lifting height, 1965 mm full free lift, hydraulic sideshift, and an overall width of only 1450 mm. With just 1808 operating hours, it is a low-hour machine ready for professional use. ⚙️ TECHNICAL SPECIFICATION • Manufacturer: AISLE MASTER • Model: 20WE • Type: Articulated / Very Narrow Aisle forklift • Year: 02/2019 • Serial No.: 44378 • Power: Electric • Operating hours: 1808 h • Capacity: 2000 kg • Machine weight: 7500 kg Gedpo Ahwltefx Agljkd • Mast: TRIPLEX • Lifting height: 6000 mm • Free lift: 1965 mm • Closed mast height: 2865 mm • Forklift height: 2250 mm • Length: 2700 mm • Width: 1450 mm • Carriage width: 1000 mm • Forks: 1150 × 100 × 40 mm • Sideshift: YES • Fork positioner: NO • Cabin: Open • Platform: None 🔋 BATTERY • Voltage: 48 V • Capacity: 775 Ah • Weight: 1134 kg • Battery inspected and reconditioned • Charger included The electric drive ensures quiet, smooth, and precise operation with zero exhaust emissions, ideal for indoor warehouse, production, and logistics applications. 🛞 TIRES • Front: Superelastic – approx. 100% • Rear: Superelastic – approx. 100% 🛠️ EQUIPMENT • TRIPLEX 6000 mm mast • Full free lift 1965 mm • Hydraulic sideshift • Electric drive • 48 V / 775 Ah traction battery • Work lights • Warning beacon • Oscillating axle • Superelastic tires • Open operator cabin • Front windscreen • Forks 1150 × 100 × 40 mm 🔧 PROFESSIONALLY PREPARED FOR WORK Before sale, the forklift undergoes a comprehensive inspection in our own service center. We check the electric drive, traction battery, hydraulics, mast, chains, rollers, articulated mechanism, steering, brakes, and all operating functions. The machine also undergoes a load test and is prepared for immediate professional operation. 🏭 APPLICATION Ideal for very narrow aisle and high-bay warehouses, logistics and distribution centers, production facilities, and pallet storage. The combination of only 1450 mm overall width, articulated steering, and 6000 mm lifting height allows maximum utilization of warehouse space both horizontally and vertically. 🌍 TRANSPORT & SALES We organize professional transport throughout Europe and worldwide, including direct delivery to the customer's premises and assistance with export documentation and international transport formalities. ✅ FULL SERVICE & INSPECTION | 🔋 RECONDITIONED BATTERY | 🔌 CHARGER INCLUDED | 🏗️ LOAD TESTED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | READY TO WORK

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,808 h, load capacity: 2,000 kg, lifting height: 6,000 mm, free lift: 1,965 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, motor manufacturer: ELECTRIC, gearing type: converter, battery capacity: 775 Ah, remaining battery capacity: 85 %, battery voltage: 48 V, battery weight: 1,134 kg, fork carriage width: 1,000 mm, fork length: 1,150 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: superelastic tires (non-marking), front tire size: 16 1/4 X 7 X 11 1/4, rear tire type: superelastic tires (non-marking), rear tire size: 16 X 9 X 12 1/8, overall weight: 9,500 kg, empty load weight: 7,500 kg, total height: 2,250 mm, total length: 2,700 mm, total width: 1,450 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, fork extension, front guard, head guard, lighting, pallet forks, sideshift, 🏗️ AISLE MASTER 20WE | ELECTRIC | 2000 KG | TRIPLEX 6000 MM | FREE LIFT 1965 MM | SIDESHIFT | 48V 775AH BATTERY | 2019 | READY TO WORK ⚡ ARTICULATED FORKLIFT FOR VERY NARROW AISLES | FULL SERVICE | WARRANTY | BATTERY & CHARGER | WORLDWIDE DELIVERY 🌍 We offer a 2019 AISLE MASTER 20WE electric articulated forklift designed for very narrow aisles, high-bay warehouses, and maximum utilization of storage space. Its articulated design provides excellent maneuverability and allows operation in significantly narrower aisles than conventional counterbalance forklifts. The machine offers a 2000 kg capacity, a TRIPLEX mast with a 6000 mm lifting height, 1965 mm full free lift, hydraulic sideshift, and an overall width of only 1450 mm. With just 1808 operating hours, it is a low-hour machine ready for professional use. ⚙️ TECHNICAL SPECIFICATION • Manufacturer: AISLE MASTER • Model: 20WE • Type: Articulated / Very Narrow Aisle forklift • Year: 02/2019 • Serial No.: 44378 • Power: Electric • Operating hours: 1808 h • Capacity: 2000 kg • Machine weight: 7500 kg • Mast: TRIPLEX • Lifting height: 6000 mm • Free lift: 1965 mm • Closed mast height: 2865 mm • Forklift height: 2250 mm • Length: 2700 mm • Width: 1450 mm • Carriage width: 1000 mm • Forks: 1150 × 100 × 40 mm • Sideshift: YES • Fork positioner: NO • Cabin: Open • Platform: None 🔋 BATTERY • Voltage: 48 V • Capacity: 775 Ah • Weight: 1134 kg • Battery inspected and reconditioned • Charger included The electric drive ensures quiet, smooth, and precise operation with zero exhaust emissions, ideal for indoor warehouse, production, and logistics applications. 🛞 TIRES • Front: Superelastic – approx. 100% • Rear: Superelastic – approx. 100% 🛠️ EQUIPMENT • TRIPLEX 6000 mm mast • Full free lift 1965 mm • Hydraulic sideshift Gsdpfj Aglq Eex Aglekd • Electric drive • 48 V / 775 Ah traction battery • Work lights • Warning beacon • Oscillating axle • Superelastic tires • Open operator cabin • Front windscreen • Forks 1150 × 100 × 40 mm 🔧 PROFESSIONALLY PREPARED FOR WORK Before sale, the forklift undergoes a comprehensive inspection in our own service center. We check the electric drive, traction battery, hydraulics, mast, chains, rollers, articulated mechanism, steering, brakes, and all operating functions. The machine also undergoes a load test and is prepared for immediate professional operation. 🏭 APPLICATION Ideal for very narrow aisle and high-bay warehouses, logistics and distribution centers, production facilities, and pallet storage. The combination of only 1450 mm overall width, articulated steering, and 6000 mm lifting height allows maximum utilization of warehouse space both horizontally and vertically. 🌍 TRANSPORT & SALES We organize professional transport throughout Europe and worldwide, including direct delivery to the customer's premises and assistance with export documentation and international transport formalities. ✅ FULL SERVICE & INSPECTION | 🔋 RECONDITIONED BATTERY | 🔌 CHARGER INCLUDED | 🏗️ LOAD TESTED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY | READY TO WORK

Condition: used, Year of construction: 2015, functionality: fully functional, Technical specifications: Rod diameter: 20-80 mm Rod length: 1,000-4,300 mm Remaining piece length (min.): 120 mm Remaining piece length (max.): 250-400 mm Gjdps Agnuqofx Aglokd Loading capacity (depending on rod diameter): 270-320 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 123 h, Varnishing tower (chambered coater system) Axis control CP2000 control center with remote control for color zones, color ducts, as well as circumferential, side, and diagonal registration with job memory card and touch screen Gedjzlqduspfx Agljkd Alcolor film dampening system with circulation and cooling Ink temperature control Autoplate automatic plate changing system Automatic ink roller cleaning system Automatic blanket and impression cylinder cleaning system Powder sprayer IR dryer Extended extended delivery Standard accessories

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, controller manufacturer: TRUMPF, controller model: TASC 6000, pressing force: 173 t, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Gjdpfx Ajza U Nfeglskd Bending Length 4250 mm

Year of construction: 2026, operating hours: 7,000 h, condition: used, We offer this used CML Finishing Ghost C Master CML Ghost 6 axis robot painting line, year of construction 2018. Including: Gkjdpfsyx Sv Usx Agled 1pcs Master CML Finishing Ghost C robot 1pcs Slave CML Finishing Ghost C robot 1pcs 3D Scanner with dimensions and depth scanners 2pcs Control cabinets with monitors 1pcs Graco Premier 800 pump 5pcs Graco G36W05 pumps 1pcs Belmeko Spray booth with exhaust and return air system If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2023, functionality: fully functional, 6-axis CNC spraying robot for automatic surface treatment of windows, doors, and other suspended items. Features tracking, automatic color change, and intelligent control of paint and spray pattern. Gksdpfxo Aazwxj Aglod Manufacturer: CML Model: Ghost X Master Year: 2023 Condition: Used machine Max. workpiece dimensions: 3500x2640x150 mm Automatic color change: 5 colors + wash 2 spray guns: Air-mix Graco G40 Tracking: painting on moving workpieces Power: 18 kW Air pressure: 6 bar Workpiece loading/unloading: manual Paint pumps: 5 pcs Wash pump: 1 pc.

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Gjdpfxet D Nz As Aglskd Hydraulic Section Shear - Combined

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm Gkedevg R Rzspfx Aglod punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories Gkedpfxex S Npfs Agled

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting Gkodpj Agnz Nofx Aglod 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: new, Year of construction: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for regenerating DPF/FAP/GPF filters and catalytic converters designed for passenger and delivery vehicles. It has a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The machine's interior is made of stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed-loop system using a hydrodynamic method. The device allows for filter contamination measurement both before and after regeneration, with results displayed in mbar. It features an integrated drying system with temperatures up to 100°C. After regeneration, a final backpressure measurement is taken and provided to the client as a printed report. This comprehensive cleaning process can restore the filter’s factory settings up to 99.9%. Components from leading European manufacturers have been used in the machine’s construction, ensuring the highest quality and reliability. TECHNICAL DATA: • Weight 600 kg • External dimension (L x W x H) 210 x 106 x 215 cm • Chamber dimension 140 x 69 x 107 cm • Tank capacity: 185 litres • Operating pressure 6-8bar • Maximum power 10 kW • Water inlet connection 1/2" • Water outlet connection 6/4" Gsdpfsgllwijx Aglokd • Airflow: up to 390 m3 • Frequency 50 Hz • Hypertension up to 340 mbar • Safety features: temperature sensor, pressure sensor, door opening sensor, emergency safety switch EQUIPMENT: • 7″ color touch screen • sensors: liquid level, liquid and air temperature, pressure flow, door opening, disappearance and phase sequence • protections: emergency safety switch, end protections of the chamber door • filter contamination measuring system • AISI 316 stainless steel chamber • extended 3-stages liquid filtration system • integrated drying system in a smooth temperature range from 70 to 100 ° C • cooling the drying system • integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • set of connection adapters for DPF / FAP / GPF / KAT / SCR filters • starter kit for consumables (a set of filters + 2L XTON DPF Cleaner detergent) • liquid tank with a capacity of up to 185 liters • extended 12-month manufacturer’s warranty (optional 24 or 36 months) ADDITIONAL OPTIONS: • automatic double-sided filter cleaning • a second fluid circuit with an additional pump • thermal insulation of the liquid tank • automatic liquid top-up • automatic dosing of chemicals • quick-X filter mounting system • EURO5 and EURO6 adapter

Condition: good (used), Year of construction: 2016, Renault Master 2.3DCI Comilev 100 tf1 Work platform / Truck-mounted aerial platform / Nacelle 10.5 meters working height, 2016. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always available. Van de Wert Trading B.V. Gksdpfxe Aa Am Uo Aglsd Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), Year of construction: 2012, operating hours: 36 h, functionality: fully functional, color channels: 5, Coating unit (chamber doctor blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts as well as circumferential, lateral and diagonal register with Job Memory Card and touch screen Alcolor film dampening system with recirculation and cooling Autoplate automatic plate changing system automatic ink roller washing device automatic blanket and impression cylinder washing device Substrate thickness extension 0.6 mm Gkedpfsy Hvt Hsx Agled Powder sprayer IR dryer Extended high-pile delivery Standard accessories

Condition: new, mileage: 10 km, power: 110 kW (149.56 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,500 mm, loading space width: 1,600 mm, loading space height: 1,700 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Vehicle: * Renault Master New Model 2025! * Premium body structure * Air conditioning * DAB radio with Bluetooth * OpenR Link 10'' multimedia system * Navigation system possible with: * Apple CarPlay * Android Auto * Qi wireless charging pad * Rear parking sensors * Reversing camera * Driver fatigue warning system * Traffic sign recognition system * Crosswind assist * Heated windshield * Light sensor * Rain sensor * Lane keep assist * Emergency brake assist * ABS, ESP * Electrically adjustable exterior mirrors * On-board computer * Start/stop function * Mud flaps * Diesel particulate filter (EURO 6E) * Driver airbag * Multifunction steering wheel * Power steering * Cup holders * Electric windows * On-board computer * Seats: Cloth upholstery * Central locking with remote control * Interior lighting * Long wheelbase * LED daytime running lights * LED low beam headlights * Rear PDC parking assistance * Body: * Premium refrigerated box body – Fresh service * Unit: Carrier Xarios 300GH (drive and standby cooling) * Internal dimensions: L/W/H in mm 3500/1600/1700 * Cooling and heating functions available If the vehicle is not in stock – short delivery times available! * Contact us for an individual leasing or financing offer * Net export possible * Delivery from €199 Didn't find the right vehicle? Gedpfx Ajw Hki Aoglskd Configure your own vehicle! Whether equipment, body, or engine variant – everything at a fair price! You can also purchase the bodywork separately for your existing vehicle! Do not hesitate to contact us! * Please note: Images may show optional extras not included in the base price. The information provided online is for descriptive purposes only and does not represent guaranteed characteristics. The seller assumes no liability for typing or data transmission errors, changes, or input mistakes. Please verify all features and equipment directly on the vehicle before purchase. Subject to error or prior sale. This advertisement is an invitation to submit an offer.

Condition: used, mileage: 62,100 km, power: 96 kW (130.52 HP), first registration: 02/2019, fuel type: diesel, maximum load weight: 1,200 kg, overall weight: 3,500 kg, color: white, Equipment: ABS, air conditioning, airbag, immobilizer system, onboard computer, Special features - Air conditioning - ABS, ASR - Cruise control - Power steering - Driver's seat with armrest - Electric windows - On-board computer - Radio CD, USB, Bluetooth - Central locking with remote control - Rear view camera - Electronic immobilizer Body Box body with loading ramp and side door Box body from French manufacturer Gkodpjv Hn Haofx Agljd - Cargo space: 4.25m x 2.25m x 2.25m (L x W x H) - Side door - Electrically operated fully automatic side step - Interior lighting Loading ramp - Dimensions: 2.8m x 0.8m (L x W) The box body is made of very lightweight fiberglass-reinforced plastic, giving the vehicle a very high load capacity of up to 1,200 kg. The Renault Master with a fiberglass-reinforced plastic body is not only an excellent base for food trucks, campers or mobile shops, but is also ideal for conversion for transporting horses or other animals. Thanks to the light yet robust construction and the spacious cargo area with a volume of 21 m³, the vehicle offers plenty of space for safe and comfortable animal transport. The existing ramp and side doors allow for quick and convenient loading and unloading, which is especially important for transporting animals. With suitable modifications, the Renault Master can be tailored to meet the specific needs of animal owners or transport service providers. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles we offer are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Photos are shown exclusively with original images taken at our facility – this guarantees full transparency regarding the actual condition of the vehicle. Our vehicles undergo thorough preparation in our in-house workshop before sale – including mechanics, bodywork, and paintwork. They are therefore optimally prepared for the next technical inspection. We also guarantee the authenticity of the specified mileage. Trust is good – control is better: Upon request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our range of services for you: Delivery of your vehicle to your desired location Complete handling of export formalities, including export plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment as desired Are you looking for something specific? If you currently cannot find a suitable vehicle for your company in our stock, please contact us – we are happy to help you.

Condition: new, Year of construction: 2025, total width: 2,100 mm, total length: 1,260 mm, total height: 2,150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all types of vehicles. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity up to 250 l/min, and an integrated filter drying system. The Master Flash technology utilizes the full benefits of the hydrodynamic method, restoring filter efficiency up to 99.9% compared to the new one. It is completely safe for the monolithic structure of DPF filters. Properly adjusted parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, maintaining the filter's factory characteristics. The pump with chemical sealing and electronics based on components from leading European manufacturers guarantee the highest quality and reliability. The machine is equipped with a filter contamination measurement system (backpressure measurement) and an integrated filter drying system with a temperature range of 70 to 130 degrees Celsius. The filtration system, expanded with a pre-cleaning filter, significantly extends the lifespan of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical interference with the filter structure, restoring its factory performance to 99.9%. TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Max power: 12 kW * Frequency: 50 Hz * Water inlet connection: 1/2” * Water outlet connection: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen Gkedpfx Agsgllkasled • Sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss, and phase sequence • Filter contamination measurement system • Chamber made of stainless steel AISI 316 • Extended 4-stage liquid filtration system • Two heaters • Integrated drying system with a temperature range from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Set of connection adapters for DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapter • Starter kit of consumables (complete set of filters + 2L XPOWER DPF Cleaner detergent) • Extended 12-month manufacturer warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS - CONTACT US FOR MORE INFORMATION.