Used Belflex Bf815 Scg-M for sale (26,726)

Condition: used, Year of construction: 2012, Hot air heater used Year of construction 2012 with forced-air heating oil burner (tested according to DIN 4794) suspended version Nominal heat output: max. 120 kW Hot air output 9200 m³/h Fuel type: heating oil Operating mode: cycling essentially consisting of: Sheet steel housing, double-walled, with insulation, galvanized, combustion chamber made of heat-resistant special steel with heat exchanger, radial fan with three-phase motor output 2.2 kW, forced-air heating oil burner Double-walled insulated stainless steel chimney with cleaning opening Control cabinet with selector switches with digital controller with timer Iaelhsugx Trsccqmjt approx. 20 m additional duct with vertically and horizontally adjustable ventilation grilles incl. Volume flow control 4 heat recovery ventilators with differential temperature control (infinitely adjustable) Availability: short term Storage location: Hagen, NRW

Condition: excellent (used), Continuous mixer M-tec D 10 Iaslheirfp Ijccqmst Drive power 2,2 kW Mixer capacity approx. 20 l/min 14 pieces available Very good ready to use condition, directly from production!!!

Condition: good (used), Year of construction: 2011, Hioki 3154 Digital M Hitester Manufacturer: Hioki Japan Type: 3154 Digital M Hitester Year of manufacture: 2011 For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. Iaolhccevahxceqmst - The item is offered as used, without any guarantee or warranty. - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. Please contact us if you have any questions or would like to arrange a viewing. Thank you for your interest.

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 36-10-6, space requirement width: 1,140 mm, space requirement length: 4,880 mm, overall weight: 636 kg, For sale is a used M&R Fusion model 36-10-6 textile dryer. Technical specifications: 400 V, 3 Ph, 38 A, 23.5 kW 6 height-adjustable heating panels Belt width 91 cm Tunnel length 305 cm Total length 488 cm Total width 114 cm Inlet length 107 cm Outlet length 76 cm Shipping weight approx. 636 kg The unit is fully functional and can be tested on-site. The sale is subject to exclusion of warranty and guarantee. Collection, disassembly, and loading must be arranged by the buyer. A forklift can be provided on-site. Iolhewb Tbqoccqmoat

Condition: new, 21.25 m² storage platform incl. stairs, railings on two sides, top edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Supports, stairs, railing posts, cross bracing & dome struts powder-coated in RAL 7016 - Handrail, knee rail, roll-off edge, main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, OK natural & UK white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x Chipboard - 01 x Stairs, 37° incline - Approx. 8.25 running meters Railing - Incl. connecting material & screws Ijlhcewhmygecqmjat -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5026,00 € net 5980,94 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Iajlswk Dw Ujhccqmjt Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Year of construction: 2018, Condition: ready for operation (used), Various machines from a print shop are available. 1) Saddle stitcher Brehmer ST 300, year of manufacture: 1999, with 6 stations, UFA and trimmer. Including extensive spare parts. 2) GUK FA 36-4 buckle plate folder, year of manufacture: 1998, with SAF. Including extensive spare parts. 3) Buckle plate folding machine GUK FA 52/4-4K, year of manufacture: 1988, with 4-pocket cross-fold unit. Including extensive spare parts. 4) Universal eyelet stitching head Hohner 52/8 S, factory overhauled. 5) Theisen & Bonitz TB-Sprint 325 VP gathering machine, year of manufacture: 1991, with 25 stations. 6) Ludden & Mennekes STV 1200 compaction system, year of manufacture: 2018. 7) Nagel Multinak S booklet and block stitching machine. 8) Affeldt SA 12 film sealing machine, year of manufacture: 1994, including 2 pallets of film. Control defective. 9) RIMA RS-10S compensating stacker with delivery belt. 10) Strapex STF automatic package strapping machine, year of manufacture: 2002. 11) Cyclop GL215 pallet film wrapper, semi-automatic with turntable. 12) Dürselen PB 01 paper drilling machine, year of manufacture: 1993, with 4 spindles. 13) Grafotec Lega 30/55 press stack delivery, year of manufacture: 1991. 14) RIMA System RS 220 corner deflector, suitable for cannibalization, part of the control system missing. 15) IBICO EPK-21 plastic spiral binding machine. 16) Habasit PT-103/8 belt hot-pressing device, new and in original packaging. 17) Regu Binder pleating belt machine. Including pleating belt. 18) Self-made roll unwinder, solid construction. 19) Perforating machine from E. Bickel. On-site inspection is possible. Only a package sale is possible. Ijlhjwhp Nwsccqmeat

Condition: excellent (used), CATALOGUE NUMBER 6985 TECHNICAL DATA - max. width of the processed element 300mm - height of the processed element 200mm - aggregate: grooved rubber roller + shoe + metal roller - work table 1230x440mm - belt 300x1900mm from above: - rubber, sliding roller - aggregate approx. 7.5kW - sliding, rubber roller from below: - pulling belt - pneumatic oscillation - 2 types of feed speed - feed motor 0.85kW - diameter of the extraction nozzle 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530kg - unpainted - used grinder - very good condition good Net price: PLN 13,900 Net price: EUR 3,270 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change) Iaolhccqslvtm Semet

Condition: ready for operation (used), Functionality: fully functional, Heavy-duty cart – flatbed – heavy-duty trailer – KTS transport cart Make: KTS Germany Type: ASL Factory no.: 14243 Year of construction: 2012 Capacity: 16,000 kg Equipment weight: 1550 kg Loading surface length: 5000 mm Loading surface width: 2000 mm Loading surface height: 690 mm Total length incl. drawbar: 6800 mm - Double steering of the wheels, Small turning circle – swivel angle 45° - Wooden floor Wheel design Twin wheels, solid rubber tyres on welded steel rims. ----- Heavy-duty cart – 12 metres Iaelhccjwgywpeqmet Length: 12,020 mm Width: 2,510 mm Height: 590 mm Net weight: approx. 5,500 kg Total length incl. drawbar: 14,350 mm - Double steering of the wheels - Wooden base ----- Heavy-duty cart – 12 metres Length: 12,020 mm Width: 2,510 mm Height: 590 mm Net weight: approx. 5,500 kg Total length incl. drawbar: 14,350 mm - Double steering of the wheels - Wooden base ----- Heavy-duty cart - DAF Length: 2,500 mm Width: 1,520 mm Height : 350 mm Total length incl. drawbar : 3100 mm - Double steering of the wheels - Wooden base Price for the Heavy Duty cart : on request by e-mail

Year of construction: 1991, Condition: used, Functionality: fully functional, Vacuum Evaporation Unit M&L for Concentrated Apple Juice Production Manufacturer: M&L Year of Manufacture: 1999 Quantity: 1 unit Iajlhcjwktdqecqmjt Performance Specifications: Raw cloudy apple juice input (10–12 Brix): 14.5 – 15 tons/hour Concentrated juice output (70–72 Brix): 3.2 – 3.5 tons/hour This vacuum evaporation unit is designed for the efficient production of high-quality concentrated apple juice. Currently, the unit is disassembled and ready for transport.

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm Iaslhjwhmtmjccqmot - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), For sale is an M+R (M&R) gas dryer for e.g. textile printing. Fully functional. Can be viewed. The conveyor belt is approx. 1.5m wide. The dryer is approx. 7m long Iaslhcou I Umyscqmot

Condition: like new (used), Year of construction: 1999, operating hours: 24 h, Functionality: fully functional, total height: 2,500 mm, total width: 1,000 mm, overall weight: 1,200 kg, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Iaelhcjurb R Escqmjt Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Weight: 1.240 kg Ioljv Ultyshccqmeat - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 100658 - Voltage [V]: 400 - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight: 1240kg - Transport packages: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2003, Condition: excellent (used), machine/vehicle number: MBUT136, ! bargain price ! Price from 1150 euros R. Stahl 1-girder suspension crane, bridge crane, crane track, indoor crane, gantry crane Payload 250KG 7 cranes available: 4: Steel suspension crane NL 250KG, width 6.35m, track width 5.6m 5: Steel suspension crane NL 250KG, width 2.65m, track width 1.9m 6: Steel suspension crane NL 250KG, width 4.85m, track width 4.35m 7: Steel suspension crane NL 250KG, width 2.90m, track width 2.35m 9: Steel suspension crane NL 250KG, width 6.0m, track width 5.5m 10: Steel suspension crane NL 250KG, width 1.03m, track width 0.74m (1150 euros) 11: Steel suspension crane NL 250KG, width 1.65m, track width 1.25m Track width can be changed, end carriers are screwed with 8 screws. Tracks (IPE 200 - not available) Undercarriages can be adjusted to the carrier dimensions. incl. complete control, floor operation by means of a control bottle All cranes can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction 2003 Very good condition, systems were only used for maintenance - hardly used Shipping by courier, collection preferred Iasljigl R Rohccqmet Location 75053 Gondelsheim Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Ielhccqowd Ulvsmjat

Condition: as good as new (ex-display), The efficient Leica DM2500 M microscope for materials analysis and quality control simplifies workflows, allowing users to focus fully on their work. Intuitive handling combined with superior optical performance guarantees fast, precise results. Whether you choose N PLAN (achromatic) or Plan Fluotar (semi-apochromatic) objectives from Leica Microsystems, all objectives deliver razor-sharp images for all contrast techniques. Large image fields (25 field number) reduce the time required for scanning samples and analyzing structures. Enjoy the highest contrast and best resolution for evaluating your samples. Iajlhccswbizaeqmet

Condition: used, Year of construction: 2000, Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions Iaslhccqjwc S R Tomjt WE OFFER Lifting platform, material handling platform Year of manufacture 2000 Factory No. 4370 Type SHR 253 Load capacity 250 kg This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding quote tailored to your needs. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms must be agreed upon upon order. The price is the unit price/net price or as stated in the description (plus VAT). You will, of course, receive a VAT invoice. ABOUT US DLK, based in Nordhorn, deals with new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, and machinery for trade, industry, and the craft sector. We continually offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us.

Year of construction: 1997, Condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Ielofn N U Hshccqmeat

Condition: used, Year of construction: 1999, Cross cutting saw HM-D Serial number: 229 Connection Voltage: 400V- 6KW Weight: 1240 KG Saw blade max: 550mm Saw blade min: 500 mm Axle hole: 30mm Automatic feed length: 3000mm - Year: 1999 - Documentation available: No Iajlev Ulk Sehccqmjt - Serial number: 229 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2015, operating hours: 499 h, fuel type: electric, Snorkel S1930E - 7.8m Electric Scissor Lift Manufacturer: Snorkel S1932E production year 2015/01 Electric scissor lift, lifting basket, personal lifting work platform Working height: 7.8 m Iajlhora N Dbeccqmet Platform lifting height 5.8 m Platform length: 1700 m Platform width: 740 mm Platform extension: 0.91 m Basket capacity 237 kg / 2 people People: 1-2 Battery charger: Built-in 24V operating hours: 399h Own weight: 1600 kg battery status: approx. 85% non-marking tires Full size L 1850 mm Full size W 760 mm Full size H 2150 mm

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Serial number: 319 Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown Available from August 2024 Iaslhsv Uklzoccqmet - Year: 2001 - Documentation available: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: like new (used), Functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Ijlevbdyfjhccqmsat Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: used, Year of construction: 2002, - Year: 2002 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Islsv Uklujhccqmeat Glenn Smeets

Condition: used, HM-ZN 8500 undercutting saw Iaelhccjv Rdvfeqmet Serial number: 277 Connection Voltage: 400V- 6,6KW Weight: 1400 KG Saw blade max: 700mm Saw blade min: 600mm Bore: 30mm Saw blade tiltable Length automatic feed: 9500 mm Length output conveyor: 4300 mm Total dimensions: 15000x1500x1800 mm (LxWxH) - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets