Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) with top hold down belt adjustable speed sediment removal system Dujdpfey H Dccox Affet electrical hoists

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles Dodpfx Asy H Db Eeffeut all stainless steel 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Year of construction: 2007, condition: used, Cylindroconical fermentation tank with two jacket cooling zones and one cone cooling zone. Additional title: vertical coolable stainless steel tank Capacity: 9200 l Max. overpressure: 1 bar Temperature range: 50 °C Length: 2000 mm Height: 4713 mm Material: stainless steel 1.4571, 1.4404, 1.4301 Dusdey N Edyopfx Affjt Position: standing on 3 feet Features: 2 jacket cooling zone, 1 cone cooling, Ladder bracket

Year of construction: 1991, condition: used, Storage tank, insulated, stainless steel, cooling jacket for glycol cooling. Additional title: double-walled tank (coolable) Capacity: 1300 l Width: 1300 mm Dsdey N Edtjpfx Affeut Height: 2300 mm Formats: Flat conical Operation / Control: Manual Material: stainless steel 1.4301 Position: vertical Base construction: on 4 feet Features: double-walled with full jacket cooling, with sampling tap, pipe connections; connections: Outlet DN50, cooling line DN20

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Year: 2006 Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Dusdpfjy Icgiox Affot Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: used, Year of construction: 2011, machine/vehicle number: 33203, Model: P21 Year: 2011 Serial number: 33203 Stock number: 3156 Band width: 260 mm Dusdpfx Aey Iccqjffjt Needles: 21 units of 4 mm Product height: max 210 mm Speed: 72 RPM Power: 3 x 400V, 50Hz, 2.3kW Dimensions: 1500 x 700 x 1800 mm Weight: 210 kg Including extra shredder with 104 blades

Condition: used, Year of construction: 2014, machine/vehicle number: 3237006, Model: PRoGRILL 1175 TFEF Year: 2014 Serial number: 3237006 Stock number: 3066 Belt width: 1100 mm Cooking length: 10,000 mm Heating: thermal oil, 189 kW + electric, 128 kW Extraction: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Duodey Ib Tbspfx Affjt Water: 15.4 l/min for belt washer Power supply: 3 x 400V, 50Hz, 168 kW Dimensions: 10,000 x 2,200 x 2,450 mm With central tilting belt Including welding trolley

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Djdpfx Afsymbfaefeut Weight: 450 kg

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2288, Model: ESF400 Year of manufacture: 2007 Condition: Used Serial number: 2288 Stock number: 3295 Belt width: 400 mm With bridge breaker Duodpfxoyw Sado Affet Capacity: max. 30 strokes/min Hopper: 250 liters Water: max. 4 bar Compressed air: 6 bar, 300 l/min Power supply: 3 x 400 V, 50 Hz, 5.5 kW Dimensions: 2250 x 900 x 2350 mm Weight: 780 kg

Condition: used, Year of construction: 2005, machine/vehicle number: Foodscan Pro 78810, Model: Foodscan Pro 78810 Year of manufacture: 2005 Condition: Used Serial number: 1811200505 Stock number: 3349J Operating system: Windows Protection class: IP65 Dedpeyvtffjfx Affeut Power supply: 100-240 VAC, 50-60 Hz, 2 A Dimensions: 600 x 420 x 800 mm Weight: 56 kg With touchscreen control

Condition: good (used), Year of construction: 2019, machine/vehicle number: N500003, Diaphragm: 4 units Capacity: max. 100 strokes/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power supply: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Dedpfx Aoy Ia U Reffjut Weight: 2500 kg

Year of construction: 2013, condition: used, Manufacturer: Fryma KorumaModel: MZ190Year: 2013Type: Colloidal millPower: 45 kWApproximate capacity (manufacturer’s specification): 2,600–26,000 l/hProduct particle size: 100–500 µmTechnical drawings available Dujdpoy H Rfkefx Affet

Condition: used, Year of construction: 2005, Additional title: two component mixing plant with deareation and carbonisation Capacity: 9600 l/h Maximum CO2 content (operating value): 8 to 8,5 g/l Residual oxygen content (operating value): 1 to 1,5 mg/l Accuracy of Brix and CO2 measurement respectively: ± 0.05 °Brix; ± 0.05 vol% alcohol Features: Brix measurement and CO2 measurement (ACM company); Dsdpfx Afsy Nncxefsut

Condition: used, Year of construction: 2016, Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology. Additional title: Empty bottle control Capacity filline line: 12000 bo/h Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Running direction: left -> right Dedpfoy Nnbbsx Affeut Operation / Control: Simatic S7 Position: in a footed housing Base construction: straight-running Features: Control and display panel, housing with safety doors, bottle discharge

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Dedoy Nm I Hopfx Affout Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Condition: good (used), functionality: fully functional, conveyor belt width: 500 mm, conveyor belt length: 750 mm, 1 x Tekno-Stamap bench-top manual sheeter/laminator, previously used for jam roll polies. Model - LAM 507 B. Belt dimensions (each belt) - 500mm wide x 750mm long. Duodpfx Aoy Ralheffjt

Condition: excellent (used), Year of construction: 2022, NiroTech RX200 Twin shaft paddle mixer Serial: 3052022 Dusdpfx Afey Egdmjfjt 2022, Stainless, twin shaft paddle mixer, variable speed, forward and reverse, guarded lid, manual discharge door, 3Ph

Year of construction: 2023, condition: like new (used), Belshaw HI18F Icer Duodpfx Aoy Egcijffot unused, 2023, Stainless, This icing machine quickly applies icing to an entire tray or pan of donuts, can ice up to 24 donuts in one swift action, tray size up to electronic temperature controller, up to 1500 donuts per hour, mobile, 1Ph

Year of construction: 2021, condition: excellent (used), Belshaw HI18F Icer 2021, Stainless, This icing machine quickly applies icing to an entire tray or pan of donuts, can ice up to 24 donuts in one swift action, tray size up to electronic temperature controller, up to 1500 donuts per hour, mobile, 1Ph Djdpfx Aey Ef H Heffjut

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Additional title: refrigerant ammonia Dsdpfx Aexbn Upsffsut Brew water flow: 5 m3/h 2 bar Ice water flow: 15 m3/h 2 bar Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar

Year of construction: 2013, condition: used, NH3 refrigeration system for cooling glycol and brewing water, consisting of the following components: - NH3 separator brewing water 890 l (T0 = -0.5°C) - NH3 separator glycol 647 l (T0 = -6 °C) - 3 x piston compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water cooler Q0 = 200 kW - Evaporation condenser - Water tank approx. 470 hl - Glycol tank 80 hl + 2 x glycol pump - Plate heat exchanger as glycol cooler Q0 = 100 kW - High pressure collecting vessel 830 l - Danfoss frequency inverter type VLT HVAC Additional title: NH3 Cooling plant Cooling capacity Q0 brew water: 200 kW Cooling capacity Q0 glycol: 100 kW Evapotation temperature t0 brew water cooling: 0 °C Evaporation temperature t0 glycol cooling: -6 °C Dusdsxbpamjpfx Affjt Current: 185 A / 250 A Features: 2 x NH3 separators (t0 = -0.5 °C; t0 = -6 °C); 3 x piston compressors; 2 x brewing water pumps; water cooler Q0 = 200 kW; evaporation condenser; water basin; high-pressure collection vessel; glycol tank + 2 x glycol pump; Glycol cooler Q0 = 100 kW; Danfoss frequency inverter type VLT HVAC

Condition: used, Year of construction: 1982, 1 Combi-Filter Seitz, type Orion 100 Year of construction: 1982 Output: 100 hl/h complete with beer pump, conductivity measurement, dosing vessel, Control cabinet, switching panel, KG collecting pan with conveyor and disposal pump. Filterarea kieselguhr appr.: 35 m² Filtration capacity: 100 hl/h Length: 5200 mm Width: 1320 mm Dusdpfx Aoxbpaysffet Height: 2250 mm Formats: 1 m x 1 m filter plates Material: Stainless steel Position: Horizontal Base construction: Frame filter Features: Hydraulic filter compression; altguhr conveyer: up to 200 Filter sheets or 55 kieselguhr plates and 56 filter sheets

Condition: new, Year of construction: 1989, Candle filter, free-standing on 3 stainless steel feet Filtration surface: 30 m²/h Test pressure/operating pressure: 7 bar Volume: 1830 l Length: 1,5 m Width: 1,5 m Height: 2,9 m Material: Stainless steel 1.4541; wall thickness of jacket and cone 4 mm; of dished bottom 6 mm Features: Outlet: butterfly valve DN150 Duedpfxexbqkge Affot

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Duodpfx Afsxwy H Aofjt Frequency: 50 Hz Length: ca. 2200 mm Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: used, Pump capacity: 15 m³/h Max head: 12 m Engine speed: 1500 rpm Power: 3,0 kW Current: 11,8 / 6,8 A Voltage: 220 / 360 V Dodpfx Afjxwzbnofeut