Used Beverage production for sale (992)

Condition: used, Year of construction: 1998, Overview  This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Technical details  Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood Hot wort: 17 hl Pouring: approx. 270 kg Commissioning: 1999/2000 Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) Recommended room height: min. 4.2 m Weight (empty): approx. 4,000 kg Control system: renewed after 2017 Iajlhcjw Afhfscqkow

Condition: used, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing Ijlhcow Ahg Rscqkeaw In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line.

Condition: ready for operation (used), Functionality: fully functional, André Zalkin & Cie. 10-heads capping machine Type: CA 10 320 NG With CA5 capsorter Ijleu Hxw Hohccqkeaw

Condition: good (used), The Nissei NA3348 is the combi soft serve ice cream and milkshake machine for locations with high demand for soft ice cream and large-volume milkshakes. This floor-standing machine is very user-friendly thanks to its 2 separate dispensing outlets. Brand: Nissei Model: NA 3348 Giant Combi Delta Horeca Model: 21129 Dimensions (WxDxH): 460x850x1600mm Iaelhsw Ag Dhjccqkew Electrical connection: 400V

Condition: used, Year of construction: 2012, Overview This slicer, type: A 550 was built in 2012 in Germany. Automated product holder allows simple fixing of products with a length of up to 900 mm without requiring any strain. The advan tage: reduced setup times. –Shingling or stacking of almost all types of cold meats and cheese—mostly entirely without pre-freezing –Compact construction, ideal for use in smaller rooms and reloca tion in wet area for cleaning purposes. –Particularly easy, ergonomic and safe handling during production and cleaning; quickly available with flexible locations. –Perfect target weight control with tendency control with to-the-slice precision –With BRAIN2 easy reporting of production parameters and line output –Easy to operate touch screen with language-independent icons Designed for: Small, medium and large meat processing factories; Technical Details Applications      Slicing and portioning of sausage, ham, cold cuts, cheese etc. Portioning Mode      Exact weight, count, or target weight portioning Slicing Speed     Up to 50 slices per minute (depending on product and setup) Portioning Accuracy      High accuracy via dynamic scale system Product Diameter      Up to approx. 160 mm (depending on product and setup) Product Length Up to approx. 700 mm Blade Diameter Approx. 330 mm Blade Type      Circular blade, optionally with Ceraclean® coating Product Feed    Automatic Discharge Options      Stacking, shingling, or bulk output Cleaning Program      Integrated cleaning mode with removable parts Control Panel    Touchscreen with multilingual interface Data Storage     Recipe and program memory with USB interface Material      Stainless steel and food-safe plastics Protection Class      IP 65 (splash-proof, suitable for wet areas) Power Supply   3-phase, 400 V / 50 Hz Power Consumption     4.0 kW Dimensions (L x W x H)  Approx. 2,100 x 900 x 1,600 mm Weight Approx. 600 kg Hygiene Standard      Conforms to EU food machinery directive Scope of delivery Slicer | Bizerba | A 550 | 2012 Ijlhow Ad Uksccqksaw

Condition: used, Used End-of-line system for PET bottles 37800 bph This end-of-line system for PET bottles offers a high-performance configuration designed to automate palletizing, wrapping, and final handling operations. The Used End-of-line system for PET bottles 37800 bph handles high-speed production, operating at a nominal rate of 37,800 bottles per hour and a throughput of 300 pallet layers per hour. The line is already dismantled and currently in storage; therefore, it is ready for redeployment without requiring disassembly. High-performance palletizing unit At the core of the Used End-of-line system for PET bottles 37800 bph, the Krones Robot A3 palletizer, built in 2008, ensures high output and industrial reliability. It processes up to 300 layers per hour, supporting intensive production environments. Moreover, the system includes a pack divider and a pack orientator, both driven by servo motors, which accurately position bundles on the pallet. In addition, it integrates a pallet magazine, a cardboard sheet inserter between layers, and a cardboard magazine to ensure fully automated palletizing operations. As a result, the system reduces manual intervention and improves overall efficiency. Stretch-film pallet wrapping system Iolhew Ahgweccqkjaw The second component of the Used End-of-line system for PET bottles 37800 bph is the pallet wrapper, model A5000BII, manufactured by Strema in 2006. This unit stabilizes pallet loads with stretch film, minimizing the risk of load shifts during transportation. Furthermore, the machine supports various pallet heights and allows seamless integration with automated conveyor systems. Consequently, it ensures flexibility and adaptability across different production needs. Pallet transport and handling section Krones pallet conveyors complete the Used End-of-line system for PET bottles 37800 bph. These conveyors move fully loaded pallets smoothly and continuously between the system’s key units. In fact, they ensure a steady material flow, even under high-speed production conditions. Additionally, the conveyors feature robust construction, which enhances durability and reduces maintenance requirements. Meanwhile, the integration between components promotes a synchronized operational flow. Complete configuration for high-speed bottling lines The Used End-of-line system for PET bottles 37800 bph delivers an integrated solution for automating the final stage of PET bottling lines. On one hand, the palletizer ensures accurate stacking; on the other hand, the wrapper secures the load for transport. Notably, the synergy between the palletizer, wrapper, and conveyors maximizes space efficiency, reduces downtime, and enhances operator safety. In other words, the system improves end-of-line productivity without compromising performance. For example, in facilities where changeover speed and reliability are critical, this configuration proves highly advantageous. Moreover, the system can be adapted to various formats with minimal reconfiguration.

Condition: good (used), Functionality: fully functional, Capacity: up to 27,000 bottles per hour Iolhowxtu Ejccqkoaw

Condition: used, Year of construction: 2008, Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling machine: P.E Srl 8T.540.1S.1E Shrink tunnel: k Tunnel 70S Shrink wrapper: k Nice Wrap35 SFUSO Handle applicator: Comag H 40/1 Palletizer: TMG Inkjet printer: Domino A200 Iaolhccqowz H Ahoksw

Condition: used, Year of construction: 2005, Used capsuling machine Robino & Galandrino SuperBlock F6 6000 bph General Features The Used capsuling machine Robino & Galandrino SuperBlock F6 6000 bph delivers automatic capsuling functions tailored for bottling lines in the wine industry. Robino & Galandrino manufactured this model in 2005 and specifically configured it to handle 0.75-liter glass bottles. Furthermore, the machine processes PVC capsules using six dedicated capping heads and a standard capsule feed magazine. As a result, it ensures compatibility with common wine bottling formats. Operational Performance The Used capsuling machine Robino & Galandrino SuperBlock F6 6000 bph achieves a nominal output of 6000 bottles per hour. Moreover, it operates in a clockwise direction to integrate efficiently with most modular bottling lines. Thanks to its synchronized head movement and efficient transport system, the machine maintains consistent production rates. In addition, the system minimizes mechanical stress, thereby enhancing long-term reliability. Therefore, operators can maintain a steady workflow under standard operating conditions. Safety and Technical Documentation Ijlhcsw Ahf Hscqksaw The manufacturer equipped the machine with CE-compliant safety guards to protect operators during production, maintenance, and cleaning. In fact, these guards comply with strict industrial safety standards. Additionally, the supplier provides original technical manuals, which support proper installation, configuration, and scheduled maintenance. Because of these resources, technicians can reduce setup errors and avoid costly downtime. Consequently, the machine aligns well with traceability requirements and ISO-based quality systems. Operating Condition The Used capsuling machine Robino & Galandrino SuperBlock F6 6000 bph currently operates in a working wine bottling facility. As such, potential buyers can inspect the unit under running conditions. In contrast to dismantled equipment, this active status allows new owners to deploy it with minimal testing. Hence, the commissioning process becomes faster and more predictable. Technical and Electrical Specifications The machine occupies a footprint of 230 cm in length, 90 cm in depth, and 200 cm in height. It weighs 750 kg, which simplifies installation in limited-space production areas. Electrically, it draws power at 380 to 400 Volts, consumes 2 kW, and operates at a frequency of 50 Hz. Notably, this configuration matches most European industrial power standards. In other words, integration into existing plants typically requires no major electrical modifications. Industrial Application Production lines that bottle wine can directly integrate the Used capsuling machine Robino & Galandrino SuperBlock F6 6000 bph into their workflow. Besides wine, the machine can also adapt to other beverages that use PVC capsules. Importantly, the unit’s durable construction supports intensive daily use. Additionally, its high throughput and operational consistency make it well-suited for medium to high-capacity facilities. Overall, companies that require fast, reliable capsuling with minimal setup delays will find this machine a strong candidate.

Condition: good (used), Functionality: fully functional, Number of blowing stations: 14 Capacity: Up to 25,000 bottles per hour Iolhcjwxtr Dscqkjaw

Condition: used, Year of construction: 2011, Overview (H2) This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data (H3) Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) Container type: glass, transparent Container diameter: 59-67.5 mm Container height: 226-260 mm Closure material: metallic, closure diameter: 28 mm Belt height: 1000 mm Electrical connection: 400 V, 50 Hz Max. Ambient temperature: 40 °C Device diameter container carousel: 1150 mm Control functions (Spectrum TX): Label control (sensors), underfill control (X-Ray), bottle breakage control, rejection Special feature: Processing of NRW bottles with neck film Scope of Delivery (H3) HEUFT Tornado W incl. 2 cold glue stations Spectrum TX control system 6 format parts Without domino laser, vacuum cleaner and glue pumps   Iaelhewz Evyeccqksw

Condition: used, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Islhccqjw Ahfysksaw Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. Technical conclusion The used bottling line SIDEL for still water in PET bottles 25200 bph delivers a robust, efficient, and scalable bottling solution. Undoubtedly, SIDEL’s engineering ensures durability and optimal integration. For this reason, companies seeking a cost-effective way to expand production will find this line technically sound. Ultimately, it represents a valuable opportunity for those who need to scale operations without investing in new machinery.

Condition: excellent (used), Functionality: fully functional, Container type: Bottle Container description: PET bottle Material: Plastic PET Nominal volume: 0.500 l and tools for 2.000 l Capacity: 18,000 bottles per hour Iaolhccqewxtqmjkow Rotary machine with 10 blowing stations.

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Iaolhcewzvl Secqksw

Condition: used, Used filling line for beer in cans 25000 cph The used filling line for beer in cans 25000 cph delivers high-speed beer canning across multiple formats. Specifically, it fills 500 ml, 440 ml, and 330 ml cans with standard 202 lids, consistently reaching a capacity of 25,000 cans per hour. Although the line remains installed, it is currently not operational. Nevertheless, all components remain in excellent working condition. Empty can feeding system To begin with, a Linker DPG-500 depalletizer, built in 2012, unloads empty cans at the start of the line. Subsequently, rope conveyors from Linker (model RC/KHS, 2012) transport the cans to a Triplexrinser TR/KHS rinser, also from 2012. In this section, the system moves cans smoothly and prepares them efficiently for the next stage. As a result, the line ensures gentle handling while maintaining productivity. Filling and seaming Next, the KHS Innofill DVD 60 filler, installed in 2017, performs the filling process using 60 dedicated valves. In parallel, a Ferrum F08 seamer seals the cans, while an NSM 30A lid feeder supplies lids with precision. Consequently, this configuration ensures accurate dosing and secure sealing at high throughput. Notably, the filling and seaming block is among the most recent upgrades to the line. Pasteurization and quality control After sealing, the product passes through a KHS Innopro KZE flash pasteurizer, installed in 2017. Additionally, this unit includes a 5000-liter buffer tank to stabilize the process. Meanwhile, a KHS Innocheck fill level inspector (2012) continuously monitors the liquid level in each can. In doing so, it guarantees compliance with rigorous quality standards. Therefore, the pasteurization and inspection phases preserve both safety and consistency. Secondary packaging and handle application Once the cans are processed, a KHS Innopack Kisters SP 050 B2 multipack packer (2012) wraps them using shrink film—either printed or transparent. It operates on a double-lane system at 50 cycles per minute. Moreover, a KHS CSM 050-02 handle applicator (2011) applies handles at the same speed, which facilitates later transport. In other words, the secondary packaging setup optimizes the line for retail and logistics needs. Tray packing and shrink wrapping Iaslhccqow Ahfasksw Following multipacking, the line uses a KHS Innopack Kisters TP 035 B2 tray packer (2012) to place packs into trays at 35 cycles per minute. Then, a KHS Innopack Kisters FS-AL shrink wrapper (2017) applies shrink film to stabilize the load. Thus, the packs remain secure and compact throughout distribution. Furthermore, both machines maintain high reliability under continuous operation. Palletizing and end-of-line operations At the end of the line, a KHS Innopal MPH 1-1 palletizer (2012) stacks trays without using interlayers. This simplifies the palletizing process while saving materials. Subsequently, a Fiat MFP pallet wrapper (2017) secures the stacked trays with stretch film.

Condition: used, Year of construction: 2006, Overview This vacuum filler, type: REX modell RVF 327 was built 2006 and is completely refurbished. RVF 327 is designed for small and medium sized companies with frequently changing varieties and normal sausage meat quantities. The series 300 is characterised by reliable, quick and easy cleaning, minimal leftovers and low energy costs. The vane cell feed system made of wear-resistant stainless steel guarantees a long service life and the highest product quality. It ensures gentle transport of all fillers and mini mum air pockets in the sausage meat. The touchscreen guarantees simple operation. The clipper socket which is a standard feature permits the driving of various clipping devices and/or additional machines. Technical Details capacity 2.700 kg/h hopper 100 Liter filling pressure 40 bar Case holding device Scope of delivery Vacuum filler | REX | RVF 327 | 2006 Ijlhccjwzu Ewsqkeaw

Condition: used, Year of construction: 2017, Used compressor SIAD VITO 1920 year 2017 Mechanical configuration and compressor structure The Used compressor SIAD VITO 1920 year 2017 features a vertical reciprocating design with three compression stages. SIAD Macchine Impianti manufactured this unit in 2017 for demanding industrial applications, such as high-throughput bottling lines. The compressor uses a crankshaft made of cast iron, which rotates on spherical roller bearings. Steel connecting rods link the crankshaft to ductile iron crossheads. Moreover, a directly mounted flywheel transmits power through V-belts, while an external bearing support prevents shaft deflection caused by belt tension. Iaslhjw Ag U Tjccqkew In addition, the machine’s construction ensures mechanical stability even under dynamic loads. Consequently, it achieves reliable operation in continuous-duty environments. Pneumatic circuit and flow regulation The Used compressor SIAD VITO 1920 year 2017 compresses air using dry-lubricated cylinders mounted on single-chamber distance pieces. Filled PTFE seals ensure durability and chemical resistance. Furthermore, flat-disc or concentric valves regulate intake and discharge flows, and their design allows quick access for maintenance. The control logic adjusts flow automatically based on final delivery pressure. Therefore, the system supports two or three-step unloading (0–100% or 0–50–100%). When operating under partial load, pneumatically actuated unloader devices open the intake valves to reduce energy consumption. As a result, the compressor optimizes efficiency without compromising reliability. Similarly, operators benefit from adaptive control in variable process conditions. Cooling and lubrication systems The compressor cools its components using a closed-loop water-glycol system. This configuration stabilizes the thermal load during continuous operation. An electrically driven gear pump circulates the lubrication oil throughout the crankcase and the external bearing support. In fact, the lubrication system includes an in-line heat exchanger, fine filtration, and integrated pressure regulation. Technicians should fill the system with ISO VG 150 mineral oil (e.g., AGIP ACER 150) or, alternatively, a compatible synthetic such as Mobil Rarus 827. Additionally, the system incorporates temperature sensors and flow monitors that continuously verify operating conditions. Thus, any deviation from normal parameters prompts immediate intervention. Performance specifications and operating characteristics The Used compressor SIAD VITO 1920 year 2017 delivers up to 1920 m³/h of free air (FAD) at 40 bar. It draws 265 kW of shaft power at a nominal speed of 750 RPM. The unit compresses air in three stages, and each stage includes a dedicated safety valve. Operators can expect the compressor to intake air at temperatures from 0 to 40 °C and discharge it at a maximum of 45 °C. Under normal operating conditions, the unit maintains a sound pressure level of 85 ±3 dB(A), assuming a free-field environment

Condition: used, Year of construction: 2005, Overview  This aseptic PET filling line for fruit juices, beverages containing fruit juice and spritzers was built between 2005 and 2006 by the German manufacturer KHS. It is suitable for still and carbonated products (up to 5 g/l CO₂) - also with or without fruit fibers. The line covers all process steps from blowing to filling, labeling, packaging and palletizing and is designed for bottle sizes from 0.5 l to 1.5 l with various closure types. The nominal output is approx. 27,000 bottles per hour at 1.0 l still. The line will be in operation until approx. February/March 2026 and can be inspected by appointment. Technical details  Output: up to 27,000 bph at 1.0 l still Bottle sizes: 0.5 l - 1.5 l PET Products: Still beverages, carbonated up to 5 g/l, with or without fruit fibres Caps / neck finish: 26/22, 38 mm flat cap, sports cap possible Years of manufacture of the main machines: 2005-2006, individual units more recent (e.g. servo capper 2023, labeller 2013, winder 2017) Scope of delivery  Stretch blow molder KHS Blomax 16C (2005-2006), incl. chiller from Riedel Rinser KHS Bottle rinser FR-DR (ACF) 140 28/38 Filler KHS Innofill DNVF-PET ACF 100/15 SV, 100 filling stations, 15 capping stations, servo capper (2023) Nitrogen dropper from VBS, sterile tank, filling management from Eckel & Sohn, cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap), cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap). VBS, sterile tank, filler management KHS Metec Cap feeder Eckel & Sohn, cap disinfection KHS Innoclean KR9 (Flatcap) and SC4 Twin 28 S 04 (Sportscap) Cleanroom Cleanroom incl. ventilation system Fa. M&W, Zander/Smardt OPK Transport technology Container and air transport KHS, Lanfranchi Inspection Full bottle inspection Heuft Squeezer Labeling Krones Starmodul (BJ 2013) with Contiroll + 2x AutoCol units + dryer Krones Linadry Label inspection unit Heuft FinalView Packaging Tray/Shrink packer KHS Kisters Innopack TSP 050 V TPFO Wrap Around Packer KHS Kisters Innopack 320/70 (BJ 1999) Carry handle applicator KHS Carry Strip Master CSM 050- 2 Palletizing & wrapping Palletizer KHS Innopal Markant 1BSH2-PL + Innopal Markant 1BSH2/1-PL (both year 1999) Wrapper Haloila Octopus 1845S (year 2017, currently at a different location) Process Flash pasteurizer KHS Innopro ACF 03 incl. Deaerator, recycle tank, emptying vessel, carbonation system and Carrier chiller Iolowzlb Nshccqkeaw

Condition: used, Used olive oil processing line BARRACANE 2500 tons/hour Iaelhccqsw Ag T Aokjw Technical configuration of the system The used olive oil processing line BARRACANE 2500 tons/hour delivers a complete solution for olive oil extraction. It processes up to 2.5 tons of olives per hour and meets industrial requirements for medium-sized olive mills. The line covers every stage of processing, including reception, washing, crushing, malaxation, centrifugation, and final separation. Operators can run this system continuously while maintaining high throughput and product consistency. Furthermore, the system’s layout facilitates quick integration into existing facilities. Loading and washing section A belt conveyor transports the olives to a washing unit, which removes leaves, dirt, and solid debris. Next, a second elevator lifts the cleaned olives and feeds them directly into the granite stone mill. This configuration allows the used olive oil processing line BARRACANE 2500 tons/hour to maintain an uninterrupted product flow, reducing manual handling and optimizing process timing. As a result, the system improves overall plant efficiency. Additionally, the automation of early-stage processing limits human error and contamination risks. Crushing system with granite stone mill The line includes a four-wheel granite stone mill, installed on a 300 mm thick base and enclosed in a stainless steel ring. This traditional crushing system applies slow and uniform mechanical pressure to break down the fruit. The granite wheels crush the olives gently, preserving the aromatic compounds and minimizing oxidation. Moreover, the granite base stabilizes the temperature, which protects oil quality throughout the milling phase. Therefore, this system suits producers who aim to achieve premium oil quality and maintain full control over the extraction profile. In comparison to metallic crushers, the stone mill offers greater control of the paste texture. Malaxation system The malaxation unit consists of four stainless steel tanks, each equipped with a gear-driven paste pump. These tanks mix the olive paste uniformly under controlled temperature. The gear pump transfers the paste directly to the decanter without interruption. Consequently, the system maintains consistency throughout the process. Operators can manage mixing duration and temperature with precision, which improves oil separation in the following stage. In addition, the system limits temperature fluctuations, thus protecting thermosensitive compounds. The used olive oil processing line BARRACANE 2500 tons/hour ensures thermal stability and uniform paste texture across all batches. Decanter and final separation A Barracane model 4015 decanter carries out the primary separation phase. This machine receives the paste through a feeding pump and filters it using a vibrating screen before centrifugation. Then, the decanter separates the oil, water, and pomace with high efficiency.

Condition: used, Year of construction: 2014, Overview  This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  Capacity: 6 x 1,000 liters Working pressure: up to 3 bar Diameter: approx. 125 cm Height: approx. 190 cm Base design: conical base with 30° angle Type: Isobaric fermentation and maturation tanks with cooling jacket With integrated cooling jackets With decorative wooden cladding (removable) Scope of delivery  6 x Talleres Perman DI1 | Year of construction 2014 isobaric fermentation and maturation tanks Ijlhswzb T Uoccqksaw

Condition: used, Year of construction: 2016, operating hours: 10,538 h, Used filling machine TETRA PAK A3 Flex 7500 bph The used filling machine TETRA PAK A3 Flex 7500 bph delivers advanced performance for bottling applications in the food industry. Operators commonly use this machine for producing UHT milk and fruit-based beverages. The system provides high output, handles various packaging formats, and maintains long-term reliability. Iaelhcjw Ag Nwecqksw Production capacity and format handling The TETRA PAK A3 Flex processes up to 7,500 containers per hour. As a result, it supports production environments that demand high efficiency over multiple shifts. Moreover, the used filling machine TETRA PAK A3 Flex 7500 bph handles both Prisma and Slim formats, which manufacturers often choose for aseptic packaging. Consequently, the machine allows operators to switch formats quickly without modifying core components. This flexibility reduces downtime and increases productivity. Automatic filling system The automatic filling system ensures precise dosing during operation. In particular, the machine processes low- and medium-viscosity liquids such as milk, juices, and functional beverages, including those with pulp. In addition, engineers designed its modular architecture to allow rapid product changeovers while maintaining hygienic conditions. The used filling machine TETRA PAK A3 Flex 7500 bph forms and seals containers using a process that protects microbiological integrity. As such, it ensures that the final product meets food safety standards. Production monitoring and traceability The integrated production log, or works diary, tracks all operational data, including cycle times, error codes, and stoppages. For this reason, supervisors use this information to monitor each batch and respond to deviations in real time. Furthermore, the system ensures full traceability and complies with modern food safety regulations. Notably, the used filling machine TETRA PAK A3 Flex 7500 bph provides a digital record that supports audits and process validation. This feature, in turn, facilitates compliance with internal and external quality assurance protocols. Maintenance and technical accessibility Technicians can access key components easily thanks to the machine’s modular layout. Similarly, the system separates functional units like filling, forming, and sealing, which allows focused intervention without halting the entire line. Consequently, the design reduces maintenance time and lowers operational costs. In fact, operators can also connect the used filling machine TETRA PAK A3 Flex 7500 bph to predictive maintenance systems based on Industry 4.0 standards. Thus, the machine enables proactive asset management and long-term equipment reliability. Plant compatibility and regulatory compliance System integrators can install this machine into existing production lines with minimal adaptation. In many cases, the machine includes interfaces that comply with standard industrial automation protocols.

Condition: used, Year of construction: 2017, Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details  Output: up to approx. 35 cans per minute (depending on product) Formats: 330 ml & 440 ml standard cans (202) Filling system: 6-head filler Closure: double seam seamer for 202 ends Voltage / power supply: not specified Special features: Retrofitted rinser and dryer (Vigo UK) Pneumatics converted to metric connections Original operating instructions available Scope of delivery  1 × Can filling line | ABE | CraftCan35 | 2017 Incl. rinser and dryer (retrofitted) Optional: Stainless steel rotary table (pack-out table) and 3 m single-track conveyor belt Some acrylic protective cladding (some replacement required) Iajlhccqewzb Irsksw

Condition: used, Year of construction: 2014, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section Iaolhccqsw Ag Ndeksw The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: used, Year of construction: 2022, Overview The Wild Goose 5-CE evolution automated canning line is a very good compact line for the filling of carbonated soft drinks. The line is equipped with a semi automatic depalletizer and a twist rinse cage. The line is currently in production and can be inspect on site.    Components Semi automatic can depalletizer  Twist rinse cage 5-CE can filling machine 1 head can seamer Can conveyors from depalletizer until can seamer Technical Specifications Output: max. 3.000 cph Equipped for 250 ml slim cans and 330 ml sleek cans (200 and 202 ends) Adapter heights for 150 ml, 187 ml, 200 ml, 330 ml 440 ml and 500 ml cans. Iolhcewwta Secqkjaw

Condition: used, Year of construction: 2017, Overview The ALWID-GARANT-16D filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surface filling Lowering and raising the filling pipe during the filling process Scope of delivery: Filler Capper Cap sorting unit Cap alimentation Iaolhcswwq Sfecqkow