Condition: used, Siemens ADVIA 120 Hematology Analysis System Professional laboratory equipment for automated complete blood count (CBC) analysis, including leukocyte differential and reticulocyte count. The Siemens ADVIA 120 is one of the professional hematology analysis systems in the high-end laboratory class and has been specifically developed for use in hospitals, university hospitals, research institutions, and veterinary laboratories. With a sample throughput of up to 120 blood samples per hour, the system is suitable for laboratories with a high sample volume and enables fast, reproducible, and largely automated blood cell diagnostics. The device automatically creates a comprehensive CBC and determines, among other things, the number, size, and distribution of red blood cells, white blood cells, and platelets. In addition, the system analyzes reticulocytes (young red blood cells) and thus provides important information about the activity of blood formation in the bone marrow. A particular advantage of the ADVIA 120 is its differentiated evaluation of white blood cells. Through modern optical measurement methods, laser light scattering, and cell-specific staining techniques, various leukocyte populations can be reliably distinguished. Abnormal or immature cell populations are detected and marked accordingly, so that, if necessary, a further microscopic examination can be carried out. The analysis of red blood cells also goes far beyond a standard CBC. In addition to the cell count, cell size, hemoglobin content, cell volume, and other hematological parameters are determined, among other things, which allows, for example, different forms of anemia or changes in blood formation to be better assessed. Thanks to the available multispecies software, the system is not only suitable for human medicine but can also be used – depending on the software configuration – in veterinary and experimental research institutions. Functions Blsdpfxo Ahn Ave Acfop - Automated complete blood count (CBC) analysis - White blood cell differential - Analysis of red blood cells and platelets - Reticulocyte count - Automated sample processing with appropriate equipment - Use in medical laboratories and research institutions Technical data Manufacturer: Siemens Model: ADVIA 120 Device type: Hematology analysis system Analysis throughput: Up to 120 samples/hour With reticulocyte analysis: Up to 74 samples/hour Sample volume: 175 µl Leukocyte differential: 5-part plus LUC Sample loader: Optional, up to 150 samples Dimensions: 810 × 680 × 860 mm Weight: approx. 163 kg Software: Multispecies software available Computer: DTX system computer with Windows NT Embedded Accessories: Documentation, device information, and extensive original documents available "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more articles - new and used - in our shop! International shipping costs on request!

Year of construction: 2020, condition: used, This listing is for the Labogene ScanLaf Mars 1500 Class II biological safety cabinet The unit is in full working condition and ready for immediate us The Labogene ScanLaf Mars 1500 is a Class II biological safety cabinet designed to provide operator, product and environmental protection. It features HEPA filtration, vertical laminar airflow, motorised front window and adjustable lighting. The working width is 1500 mm and the cabinet is manufactured and tested to EN 12469 requirements. External dimensions are approximately 1604 x 797 x 2033 mm and weight is approximately 275 kg, excluding the stand. Blodpfx Asz D Dl Tjcfep Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Year of construction: 2022, condition: used, functionality: fully functional, Machine Description For sale is an LPG Cellu M6 Alliance Premium, manufactured in November 2022. This professional endermologie system is offered for sale in used, fully functional condition. The scope of delivery includes the device, the associated treatment heads, and the available accessories. It is in exceptionally good condition! The device is suitable for professional users in the beauty, cosmetics, and wellness sectors. Technical Specifications Manufacturer: LPG Systems Model: Cellu M6 Alliance Premium Year of Manufacture: 11/2022 Condition: used Bljdpfx Ao Agnu Aecfop Functionality: fully functional Scope of Delivery: Device, treatment heads, and accessories Operating Hours: see images Maintenance Records: available in original form and will be provided upon request. Documentation: Invoice from November 25, 2024, for “Pump Flaps” is available. Price and Inspection Asking Price: €18,900 net, negotiable. An inspection and functional test can be arranged after prior appointment. Further information and photos will be provided upon request. If you are interested, we look forward to hearing from you.

Condition: excellent (used), Year of construction: 2023, operating hours: 4,600 h, functionality: fully functional, machine/vehicle number: 023-02-0021-WSXXL II CE12, overall weight: 3,500 kg, type of input current: AC, input voltage: 120 V, table length: 700 mm, table width: 400 mm, total height: 2,380 mm, total length: 2,450 mm, total width: 1,460 mm, laser wavelength: 1,064 nm, Equipment: type plate available, Photon Energy Workstation XXL II CEPHEUS Mark12 – UKP/Picosecond Laser System For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. This system is particularly suitable for operators of existing Photon Energy/Hitachi systems, medical technology companies, laser marking service providers, or companies with a need for UDI-compliant, permanent marking. Key data: Year of construction/manufacture: February 2023 Operating hours: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: under 15 ps Repetition rate: 20 to 500 kHz Cabinet dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 rotary axis available PHOTONmark, PUC/UDI Control, CamVisionPro and hand scanner available Last maintenance: June 2026 Condition: very good Inspection and test run possible by appointment Without exhaust system, as a central exhaust system is used at the current location. The reference point limit switches in the X, Y, and Z axes have already been converted to proximity switches. The system is financed through a lease. Sale, buyout, direct settlement, or transfer of the contract will be arranged in coordination with the financing partners involved. Sale exclusively to commercial operators/companies. No warranty; liability for defects is excluded in the purchase contract to the extent permitted by law. Bodpfxszxrv Es Acfelp The system will be delivered in working order with installed control and marking software as well as the activated options. Customer-specific jobs/production programs, article, serial number, UDI and process data will be deleted before handover for data protection and confidentiality reasons. According to the manufacturer, it is generally possible to partially upgrade or modify the machine according to needs. The type and scope of such a modification must be agreed upon by the buyer directly with the manufacturer or service partner and is not part of this sales offer.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, 1. The Eppendorf 5910 Ri is a high-performance, refrigerated benchtop multipurpose centrifuge managed via an advanced touch interface. • Max. Speed: 14,000 RPM (adjustable in 1 RPM steps) • Max. RCF (g-Force): 22,132 × g • Maximum Capacity: 4 × 1,000 mL (with compatible large-capacity rotors) • User Interface: 7-inch VisioNize® touchscreen supporting 99 programs and user management Blsds Ad Nb Hjpfx Acfep • Temperature Control Range: -11 °C to 40 °C (Dynamic Compressor Control maintains 4 °C at maximum speed) • Acceleration/Deceleration: 10 / 10 ramps • Timer: 10 s to 99 h 59 min, continuous run, and short-spin functionality • Data Export: GLP/GxP compliant PDF or CSV export via standard USB • Dimensions (W×D×H): 72 × 66 × 37 cm (28.3 × 25.9 × 14.5 in) • Weight: 109 kg / 240 lbs (excluding accessories) 2. Rotor S-4x750 (Swing-Bucket) This medium-to-high capacity swing-bucket rotor is designed for high-throughput daily workflows, including cell culture and clinical applications. • Nominal Capacity: 4 × 750 mL (total 3,000 mL) • Maximum Speed: 4,700 RPM • Maximum RCF (g-Force): 4,800 × g (up to 4,816 × g depending on internal bucket variant) • Max. Radius: 19.3 cm • Versatility: Accommodates interchangeable round buckets, plate buckets, or mixed loading configurations. Adapters handle everything from 0.2 mL tubes up to 750 mL flasks and microplates. • Safety & Autoclavability: Available with optional aerosol-tight QuickLock® caps. Buckets, caps, and internal adapters are fully autoclavable at 121 °C. • Noise Level: < 57 dB(A) when running inside the 5910 Ri. 3. Rotor FA-6x50 (Fixed-Angle) A heavy-duty, high-speed fixed-angle rotor optimized for molecular biology applications requiring efficient sedimentation of dense pellets. • Maximum Capacity: 6 × 50 mL conical or round-bottom tubes • Maximum Speed: 12,100 RPM (often configured up to 13,500 RPM on specific 59-series profiles) • Maximum RCF (g-Force): 20,130 × g • Max. Radius: 12.3 cm • Borehole Angle: 45° angle orientation to minimize pellet smear. • Material: Anodized aluminum body providing superior chemical resistance. • Safety Features: Included aerosol-tight QuickLock® rotor lid for easy one-hand locking and safe handling of hazardous bio-materials. • Noise Level: < 59 dB(A) when spinning at peak operational profiles. Good working condition. Please check out our other listings as well.

Condition: used, Sysmex R-500 Hematology Analyzer For sale is a SYSMEX R-500 reticulocyte analyzer for professional use in hematology and laboratory diagnostics. The analyzer is used for the automated determination of reticulocytes, i.e., young red blood cells. The analysis of reticulocytes provides insights into the formation of new red blood cells and is used, among other things, in the context of hematological examinations. The device reliably measures parameters such as RET%, RET#, and RBC# and is ideally suited for smaller laboratories, research institutions, veterinary medicine, or as a backup system. Blsdpfx Aco Ahpfujfep Functions and Features - Automated analysis of reticulocytes - Used for the examination of red blood cell formation - Laboratory analysis method for hematological applications - Designed for professional medical and scientific institutions Manufacturer: SYSMEX Model: R-500 Device Type: Reticulocyte Analyzer Application Area: Hematology / Laboratory Diagnostics Application: Reticulocyte Determination Measurement Method: Highly advanced fluorescence flow cytometry Operating Voltage: 220–240 V AC (model-specific) Mains Frequency: 50/60 Hz Power Consumption: approx. 300 VA “We offer a suitable bank financing solution for your project – everything from a single source.” More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, 🔬 Eppendorf 5810 R Centrifuge Specifications • Maximum Rotational Speed: 14,000 rpm (depends on the rotor) • Maximum Relative Centrifugal Force (RCF): 20,913 × g • Maximum Chamber Capacity: 4 × 750 mL (3 Liters total capacity) • Temperature Control Range: -9 °C to +40 °C • Programs & Memory: 35 user-defined program slots • Acceleration / Braking Ramps: 10 / 10 independent profiles • Timer Range: 1 to 99 minutes or continuous operation • Cooling Features: • FastTemp function for rapid pre-cooling of the rotor chamber • Continuous cooling to maintain temperature when the lid is closed and the unit is idle • ECO shut-off that turns off the compressor after 8 hours of inactivity to save energy • Safety Configurations: Automatic rotor detection with speed limitations, automatic imbalance detection, steel-armored safety chamber, and a motorized lid lock. • Noise Level: Less than 70 dB(A) • Power Consumption: Maximum 1,650 W 🌀 Eppendorf FA-45-30-11 Rotor Specifications • Rotor Angle: 45° • Maximum Capacity: 30 × 1.5 mL / 2.0 mL micro test tubes • Maximum Speed (with 5810 R): 14,000 rpm • Maximum RCF (with 5810 R): 20,817 × g • Maximum Centrifugation Radius: 9.5 cm • Maximum Load Weight: 30 × 3.5 g (includes weight of adapter, tube, and liquid content) • Maximum Tube Diameter Compatibility: 11 mm • Lid Type: Aerosol-tight aluminum rotor lid with Eppendorf QuickLock mechanism for fast, one-handed locking. • Adapter Adaptability: Can accommodate 0.2 mL PCR tubes (max RCF: 16,200 × g, radius: 7.4 cm) via optional conical adapters. Good working condition. Please check out our other listings as well. Bsdpo Ad I Ekefx Acfslp

Year of construction: 2019, condition: used, Venus ARTAS IX System – Robotic Hair Transplantation Technology – Hair Restoration Used, from business liquidation Technology, data, and information according to the manufacturer: Bledpfe Abycpox Acfep Improves hair loss in the frontal area of the scalp, as well as in the temples Hair can be precisely, efficiently, and repeatedly extracted and transplanted to multiple other locations simultaneously Touchscreen user interface Random selection of hairs from the transplantation area ensures high-quality grafts and natural-looking results 7-axis KUKA robotic arm enables highly precise and efficient movements with a repeatability of 0.1 mm Technical specifications of the device: Length: 86.36 cm (34 inches) Width: 58.42 cm (23 inches) Height with robotic arm: 149.86 cm (59 inches) Weight of the cart: 181 kg (400 lbs) (181.437 kg) Electrical data: 100–240 V AC, single-phase, 50/60 Hz, 15 A Continuous operation: Yes Vacuum: 20.00 ≤ Vacuum [in-Hg] ≤ 30.40 Connection: Ethernet FDA classification: Class II Warranty: 1-year manufacturer's warranty Power connection: Detachable power cable Water protection: IPX0 (normal, unprotected device) Device type B: Enclosure Temperature: Operating: 15 °C to 30 °C Storage: 0 °C to 50 °C Humidity: Operating: 20 % to 80 % (non-condensing) Storage: 0 % to 90 % (non-condensing) Atmospheric pressure: max. 416 kPa abs Operating mode: Continuous, according to IEC 60601-1. We recommend an inspection Sale is expressly subject to the exclusion of any material defects No guarantee or warranty Information without guarantee Details, information, and technical data from the manufacturer To prevent any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment arrangement. Subject to prior sale, changes, errors, and printing errors

Condition: used, Year of construction: 2021, Canon CX-1 system, including computer, packed in its original manufacturer’s boxes. Serial number: 210141 – Year of purchase: 2022 Blsdpfxozmxqrj Acfop The system was purchased for a brief clinical study and has seen very limited use; it is in excellent condition.

Condition: used, functionality: fully functional, Technical Specifications • Product Name: JANUS® G3 Workstation, IVD (In Vitro Diagnostics) • Manufacturer: PerkinElmer, Inc. (Corporate assets now transitioned to Revvity, Inc.) Bljdpfxj Aa Rmis Acfop • Part Number / Revision: CJL8002/C • Serial Number: JA2043N3637 • Voltage Input: 100–230 V~ (Universal power compliance) • Power Rating: ~350 VA (Volt-Amperes) • Frequency: 50/60 Hz • Regulatory Compliance: CE Mark, IVD certified, TÜV Rheinland US/C Safety Certified, WEEE Trash standard compliant • Country of Origin: Made in U.S.A. (Hopkinton, MA 01748) • Authorized EU Representative: Emergo Europe (The Hague, Netherlands) System Context & Capabilities The JANUS G3 line is an automated Cartesian liquid handler platform utilized in genomics, proteomics, drug discovery, and clinical sample preparation. It typically features: • Precision pipetting ranges from nanoliter to milliliter capabilities. • Configurations for automated multi-tipped Varispan™ arms (4-tip or 8-tip variations) and integrated software automation options. Good working condition. Please check out our other listinds as well.

Year of construction: 2016, condition: excellent (used), For sale: Leica RM2255 in very good condition, recently serviced. Bsdjz Sk Dbspfx Acfjlp

Condition: used, Automated analysis device for gel electrophoresis Laboratory device for the analysis of proteins, hemoglobin, and other components of biological samples. It features an integrated gel scanner for evaluating the results. The SEBIA HYDRASYS 2 SCAN is a professional laboratory analysis system for the automated execution and evaluation of agarose gel electrophoresis. The device combines various work steps such as sample application, electrophoresis, incubation, staining, destaining, drying, and subsequent digitization of the results. It is particularly suitable for use in medical and diagnostic laboratories. Areas of application: - Serum and urine protein electrophoresis - Immunofixation - Hemoglobin analysis - Lipoprotein analysis - Isoenzyme analysis - Clinical laboratory diagnostics Equipment and functions: - Automated processing of agarose gels - Integrated gel scanning unit - Digital image and result acquisition - Touchscreen control - More than 60 HYDRAGEL programs - Software-supported evaluation in conjunction with suitable PC software Technical data: Manufacturer: SEBIA Model: HYDRASYS 2 SCAN Device type: Electrophoresis analysis device Technology: Agarose gel electrophoresis Sample capacity: 1–54 samples per gel Operation: 7-inch color touchscreen Scanner: High-resolution CCD sensor Voltage supply: 100–240 V AC Frequency: 50/60 Hz Power consumption: 1,000 VA PC connection: USB Year of manufacture: Bjdpfx Aj Agwidecfjlp “Everything from one source: We will gladly offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2015, condition: excellent (used), Exceptional Opportunity! From the former collection of the Max Planck Institute in Freiburg, we can offer you this highly efficient gene sequencing system, model "NextSeq 500," from the world-renowned brand "illumina." This system is one of the most powerful and widely used fully automatic gene sequencing systems, and it has become indispensable in virtually every laboratory worldwide. It is primarily used as a high-throughput system for the automated generation of DNA clone clusters through sequencing and primary analysis. Thanks to its particularly compact design, it is also perfectly suited for smaller laboratories and can be used ideally as a stand-alone device – all the necessary components are already integrated into the device, and complete operation can be performed via the built-in screen and a wireless keyboard. The device was acquired by the Max Planck Institute in 2016 and has been used very little. It has been continuously serviced by the manufacturer's customer service department and has only completed 395 runs – it is therefore in flawless condition both visually and technically – see the pictures. The device can be used immediately; however, for the sake of good order, we would like to point out that in a commercial operation, the legally required tests according to MTK/STK must be carried out again. Dimensions (H x W x D): approx. 585 x 534 x 635 mm Weight: approx. 85 kg Bljdoz Rph Iepfx Acfjp The total weight of the system, including accessories and pallet, is approximately 110 kg! The device can be picked up from our premises during regular opening hours after prior telephone arrangement. For an additional charge, shipping can be arranged within three working days after payment receipt, insured via a shipping company. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not permitted! The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 3D scanner, the “Shining 3D Scanner & EX Pro(H)” Item for sale: 1 x Shining 3D Scanner & EX Pro(H) We are happy to configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Bljdpfx Acozxxubofsp Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), ATTENTION! THE STATED PRICE APPLIES TO ONE LIFEPAK 15 UNIT WITH ITS ASSOCIATED ACCESSORIES. THE PRICE DOES NOT APPLY TO THE THREE DEVICES SHOWN IN THE PHOTOS! For sale: Physio-Control LIFEPAK 15 monitor/defibrillator, with charger and additional accessories. Device specifications: Manufacturer: Physio-Control. Model: LIFEPAK 15. Year of manufacture: 2015 – according to the nameplates shown. REF: 99577-001397. PN: V15-5-000024. Protection rating: IP44. Accessories shown in the photos: Physio-Control MOBILE Li-ion Charger (dual-bay). Defibrillation paddles. ECG cables. Bsdpfxjz Slkcj Acfjlp SpO₂ sensor with cable. Blood pressure cuff with cable. Side bags for accessories. Mounting bracket/base. MultiTech communication module. Used equipment, with visible signs of use. The photos show the devices offered and the available accessories. The exact scope of accessories for a specific unit should be confirmed before purchase. SOLD INDIVIDUALLY – THE STATED PRICE IS FOR ONE UNIT WITH ACCESSORIES, NOT FOR THE ENTIRE SET SHOWN IN THE PHOTOS!

Year of construction: 2020, condition: used, This listing is for Agilent Technologies Magnis NGS Prep System The unit is in full working condition and ready for immediate use Blsdpfx Acj Aaq Slsfep The Agilent Magnis NGS Prep System is a compact, fully automated benchtop platform designed for next-generation sequencing library preparation. It streamlines complex workflows, offering walk-away automation, consistent reproducibility, and high-quality results for genomics laboratories. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Professional BK Medical BK Ultrasound bk5000 ultrasound machine, designed for diagnostic imaging. The device powers on correctly – the screen and control panel are functional. The machine is mounted on a mobile stand equipped with wheels, probe holders, and an adjustable monitor. Device specifications: Manufacturer: BK Medical / BK Ultrasound Model: bk5000 Type / REF: 2300 Bsdpfx Asz Spcrocfslp Version: BK5000-11 Serial number: 5008020 Year of manufacture: 2016 Country of manufacture: Denmark CE marking: 0543 Color monitor Full keyboard and control panel Mobile design on wheels Included: BK Medical bk5000 ultrasound machine, Mobile stand, Monitor, Control panel, 2 ultrasound probes as shown in the pictures, Cables, Documentation and operating instructions. The device is used, functional, and shows normal signs of use, with some dirt and minor scratches. There are localized marks from a marker on the housing. The exact visual condition and included accessories are shown in the pictures. The screen displays the message “Factory Mode Active / Not for Diagnostic Use” – the device is currently operating in factory mode and may require appropriate configuration or activation by an authorized service center before medical use. The sale includes only the items shown in the pictures.

Condition: used, Automated Hematology Analyzer The SYSMEX XP-300 is a professional laboratory analyzer for the automated analysis of blood samples and the generation of a complete blood count with 3-part differential of white blood cells. The device enables the determination of 20 hematological parameters and is designed for use in medical laboratories and comparable professional facilities. Equipment and Functions - Automated blood count analysis - Determination of 20 parameters - 3-part leukocyte differential - Color touchscreen for operation Bedpo Agwnfefx Acfolp - Integrated thermal printer - Storage of measurement results and histograms - Interface for connection to laboratory information systems - Integrated reagent management Technical Data Manufacturer: SYSMEX Model: XP-300 Device Type: Hematology Analyzer Analysis Method: Automated 3-part differential Measurement Parameters: 20 Sample Throughput: approx. 60 samples/hour Sample Volume Whole Blood: approx. 50 µl Sample Volume Prediluted: approx. 20 µl Measurement Principle: Electrical impedance measurement Hemoglobin Measurement: Cyanide-free photometry Operation: Color LCD touchscreen Printer: Integrated thermal printer Data Storage: Up to 40,000 results Interfaces: LAN / LIS Dimensions (W × H × D): 420 × 480 × 355 mm Weight: approx. 30 kg “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in ready-to-use condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum compatibility and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you will receive a complete, ready-to-use system. The expensive double-walled glass vessel with bottom outlet, the heating bath with temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the tedious and costly individual purchases, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket allows for precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal wall scraping with viscous masses, as well as a suitable flow breaker to prevent vortex formation and for perfect vertical mixing. Dispersing device: IKA ULTRA-TURRAX T25 including matching dispersing shaft. Enables highly effective homogenization and size reduction directly during reactor operation. Drive & control: Bodpfx Ajz I Szwocfolp Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components as well as all necessary holders. Note: The sale is without control software. The system can be fully, independently, and easily controlled directly via the hardware controls. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2020, condition: used, Three identical Rodenstock DNEye Scanner 2+ units are available, with availability starting in December 2026. Printer: black-and-white printer, screen type: TFT LCD touchscreen, screen size: 10in, WSVGA, 1024x600pixels, spherical measurement range: -20dpt to +20dpt at 12mm vertex distance, cylinder range: 0-8dpt, axis: 0-180°, pupil measurement range: 2-7mm, 3 zones, number of measurement points: 1,400points at 7mm pupil, measurement method: Shack-Hartmann, number of rings: 24, number of measurement points: 6,144, number of analyzed points: 100,000, diopter range: 37.5-56dpt, reproducibility: 0.03mm, method: Placido disc/keratoscope, measurement wavelength: 455nm, no UV light, measurement range: 150-1300µm, precision: < 5µm, method: static Scheimpflug camera, measurement wavelength: 850nm, method: retroillumination, calibrated range: 7-50mmHg, precision: ±2mmHg, length: 530mm, width: 312mm, height: 570mm, weight: 25kg, with documentation. An on-site inspection is possible. Bedoz Eudcjpfx Acfolp

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Bledpfxjz Snbqs Acfsp Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, Thermo Fisher Scientific KingFisher FLEX Magnetic Particle Processor 4 units available Manufacturer: Thermo Fisher Scientific Model: KingFisher FLEX Equipment Type: Automated Magnetic Particle Processor / Nucleic Acid Purification System Application: Automated DNA/RNA purification and sample preparation Description: The Thermo Fisher Scientific KingFisher FLEX is an automated magnetic particle processing system designed for high-throughput purification and sample preparation. The KingFisher FLEX uses magnetic bead technology to automate the processing of biological samples, providing consistent and reproducible purification of DNA, RNA, proteins and other biological targets. It is widely used in molecular biology, genomics, biotechnology, pharmaceutical research and clinical laboratory environments. The system is particularly suited to laboratories looking to automate repetitive sample preparation and purification workflows while reducing manual handling and improving throughput. Bjdpfxoz I S D Sj Acfslp Key Features: Automated magnetic bead-based sample processing Designed for high-throughput laboratory workflows Suitable for DNA and RNA purification Can be used for protein and other biomolecule purification applications Programmable automated processing protocols Consistent and reproducible sample preparation Suitable for research, biotechnology and pharmaceutical laboratories Multiple plate formats supported depending on configuration User-friendly automated operation Compact laboratory footprint Typical Applications: DNA purification RNA purification Nucleic acid extraction PCR sample preparation Genomics and molecular biology Next-generation sequencing workflows Protein purification Pharmaceutical research Biotechnology research High-throughput sample preparation Removed from pharma plant in Cork, IE. Devices are in very good condition. Sold as seen ----- Keywords: Thermo Fisher, Thermo Scientific, KingFisher FLEX, King Fisher Flex, KingFisher Flex Purification System, magnetic particle processor, magnetic bead processor, DNA extraction, RNA extraction, DNA purification, RNA purification, nucleic acid extraction, sample preparation, automated sample preparation, molecular biology, genomics, biotechnology, pharmaceutical laboratory, laboratory automation, PCR preparation, NGS, next generation sequencing, protein purification, research laboratory equipment, scientific equipment, lab equipment.

Condition: good (used), For sale: professional hospital transport stretcher / medical trolley by Stryker – Prime Series 1125 Zoom model. The device is used in hospitals and emergency departments for patient transport. This model features the Zoom Drive system, which provides electric drive assistance and greatly facilitates patient movement. Manufactured by Stryker Medical USA – one of the world’s leading producers of medical equipment. The stretcher comes with an adjustable backrest, foldable side rails, and integrated braking and steering systems. ⸻ Technical specifications: • Manufacturer: Stryker Medical • Model: 1125 Prime Series Zoom Bjdsz Slrmjpfx Acfolp • Year of manufacture: 2014 • Drive: Zoom Drive – electric assist • Maximum load capacity: 318 kg • Lying surface width: 66 cm • Adjustable backrest • Folding side rails • Central braking system • Transport castors for hospital use

Condition: used, functionality: fully functional, For sale: WEINMANN MEDUCORE Standard defibrillator with monitor, SpO₂ version, manufactured in 2018. Data according to the nameplate: Manufacturer: WEINMANN Emergency Medical Technology. Type: MEDUCORE Standard with SpO₂. Serial number: 4432. Maximum defibrillation energy: 200 J. External power supply: 12–15 V DC, 30 W. Protection rating: IP54. Made in Germany. Equipment: Screen with function buttons. Connectors labeled SpO₂, ECG, and Pad. Removable WEINMANN Accu-Pack WM 45045 battery: Li-Ion, 10.8 V, 4.2 Ah, 46.8 Wh, manufactured in 2018. Condition: used, visible scuffs, scratches, and residue from stickers. Visual condition corresponds to the photos. The functionality of the device and the condition of the battery have not been confirmed. The housing has an STK inspection sticker with the date 09/2026. No inspection report is provided. Blsdpfx Ace Adyg Tjfsp SHELF 49.

Condition: used, This listing is for a PerkinElmer JANUS G3 Liquid Handling Workstation The unit is in full working condition and ready for immediate use This liquid handling workstation is a high-quality lab instrument manufactured by PerkinElmer (Model: JANUS G3 Workstation). This automated platform features an 8-tip Varispan arm designed for precision liquid transfer, sample preparation, and high-throughput assay automation. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Bjdpfs Agpwyjx Acfolp specifications_en: Voltage: 100-230 VAC, 50/60 Hz; Power: 350 VA; Configuration: 8-tip Varispan arm; RUO (Research Use Only) model.