Machining Center - Universal

JUARISTI TS-3 - MG 12

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,850 mm, travel distance Z-axis: 1,000 mm, feed length X-axis: 20,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 20,000 mm, Droop & Rein Modimill built in 2001 Fidia C20 Gsdpfxjvk Ubxe Acwstt

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Gedpfx Aowzx Ntscwjtt Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS HORIZONTAL MACHINING CENTRE WITH MULTI-PALLET SYSTEM X-AXIS TRAVEL: 2000 mm Y-AXIS TRAVEL: 1600 mm Z-AXIS TRAVEL: 1800 mm SPINDLE: 4000 rpm; 37 kW; 794 Nm; BIG PLUS ISO 50 PALLET: N.4 ; 1000X1000 mm MAX ADMITTED LOAD: 3000 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 1550 mm HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 306 POS MAX TOOL WEIGHT: 35 Kg Godpfx Acji En Azswstt HEAD: AUTOMATIC 1° ROTARY HEAD CONTROL UNIT: SIEMENS 840 D ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; RENISHAW TOUCH PROBE

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Gtodpfx Acoxm Sxvowet Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Year of construction: 2005, Technical details: x-travel: 2200 mm Gtedpfx Acsvgmitewet y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA weight of the machine ca.: 50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm *

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Gtjdpfx Acsu Dahnowet Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 2001, Technical details: x-travel: 2000 mm y-travel: 1600 mm z-travel: 1140 mm b-axis: 0.0001° x 360° ° number of pallets: 4 table surface area: 1000 x 1450 mm max. table load: 6.000 kg turning speed range: 4 - 10000 U/min power capacity at 100 % load: 40 kW kW tool taper: HSK100 DIN69893A machine weight ab.: 63.000 kg space required L x W X H: 12320 x 11000 x 4700 mm incl. 50 x HSK100 tool tapers * Gsdpfsxc E H Eex Acwstt