Used Accessories and spare parts for sale (291)

Condition: good (used), mechanically switchable clutch, detachable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling without type designation -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm Bwjhx Duioik Sl Aj Tsl -Dimensions: 310/212/H213 mm -Weight: 32 kg

Year of construction: 1980, Condition: excellent (used), Milling spindlekpof DECKEL for machines type: LB2 u.LB3 year 1980 Spindle holder ISO 40 Bohx Djhvz Dxsui Tewl Head in both sides + - 45 burr swiveling . In very good condition.

Condition: excellent (used), Walter cutterhead, type: F3042B080Z0515 Bshx Dujqgc Thei Tewl

Condition: used, table length 1000 mm table width 475 mm table height 145 mm Bshx Dusn Nc Nbsi Towl

Condition: excellent (used), Vertical head (28571) Type Huron Bjhx Duijvcl Ado Towl type SK 40 Condition :as good as new Mounting surface diameter 255 mm Centering pin diameter 165 mm Bolt circle diameter 18 mm Fixing screws 210 mm Projection 300 mm

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm 6 clamping grooves: 16 mm Bwohx Dusb Hmbpsi Tjl groove spacing: 90 mm Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg weight: 376 kg Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Condition: good (used), turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table -Manufacturer: Scherer, indexing table from vertical lathe VDZ 80 DS with accessories -Servo motor: Siemens 1FK7042 -Individual components/accessories: see photos -Transport dimensions: 1200/720/H620 mm Bwjhx Duovu Tmbji Tel -Weight: 198 kg

Year of construction: 1990, Condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 Bwjhx Djgabu Ujui Tol with counterholder and base plate.

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse Bshxovr Stue Dui Tjwl

Condition: used, table length 1000 mm table width 475 mm Bwehxsrrzkhs Dui Tel table height 145 mm

Condition: new, Origin: milling machine ORADEA FUS 32 (Romania) Size: 800 x 450 mm clamping surface: 640 x 360 mm Number of clamping grooves: 5 Clamping groove width: 23 / 14 mm clamping groove depth: 26 / 13 mm locating surface: 350 x 240 mm Equipment: tilt, turn and swivel Dimensions: 800 x 700 x 600 mm Weight: 270 kg Behx Duiefz Nxts Tswl

Year of construction: 2000, Condition: used, table clamping surface: 800 x 425 mm 6 T-slots 14-H7, slot width: 63 mm table swivels left/right: 45° Table inclinable from/to the machine: 15/45°. Bohxjb N Acmo Dui Tewl Table top rotation range 360°, resolution: 0,001°. max. workpiece weight: 300 kg Dead weight: 340 kg

Condition: used, Functionality: fully functional, Milling planer heads 4 pcs. Bore 35 mm Bwjhx Dovzudueui Tol

Year of construction: 1990, Condition: good (used), Various collets and holders Approx.300 pieces. Bwehx Dushvz Iiei Tel For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries.

Condition: good (used), lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 179 mm -Dimensions: see photo technical drawing -Number: 3x clamps available Bjhx Duiouza S Ue Towl -Price: per piece -Dimensions: 205/80/H155 mm -Weight: 5.0 kg

Condition: new, diameter / mm Cutting (quantity) / weight / kg Rotor type: rotor FK.213.570 11 05.01 MAT number: 000.213.570 Condition: new Bwjhxeu Dbz Ae Dui Tjl incl. test report

Condition: new, The Duplex stops allow angle cuts from 0-90° very quickly, precisely and continuously. When set to 45°, the miter can be cut on both sides of the workpiece without adjusting the two stops. The dimensions are set using a magnifying glass and a measuring scale for length compensation. All DUPLEX variants can be easily positioned along the entire length of the carriage. No. M64060 Bjhx Duovyup Ioi Tswl

Condition: used, machine/vehicle number: 098031, 14 Collets in mm increasing: 5 - 25 mm Shank: ISA 40 Bwshjb Nz U Hox Dui Tjl

Year of construction: 2002, Condition: good (used), Hinge width 300 mm Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Bshx Duijmdqx He Tjwl Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1980, Condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Bjhxjg Uf I As Dui Tswl Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Condition: good (used), Clamping table, clamping angle, T-slot table, round table, milling machine table, turning table, cross table, cross-sliding table, boring table -Manufacturer: Scharmann, clamping table drilling table rotatable -Table surface: 1400 x 1000 mm -Travel distance: 1200 mm -Grooves: 7 pieces 22 mm -Dimensions: see photo -Total dimensions: 3410/1350/H665 mm -Weight: 4600 kg Bwjhxepyk Ize Dui Tjl

Condition: used, manually movable Bwjhx Duoccxgwji Tel Table or base plate size (same size): 460 x 150 mm Overall height: 45 mm Weight (weighed): Guide slightly grooved!

Year of construction: 2010, Condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Diameter 50 mm Diameter 40 mm In good condition. Bwohx Duijh I T Nrj Tsl

Condition: used, clamping claws, clamping devices, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Bessey, clamping claws, machine table clamps, pivoting -Type: BS-5 Bwshx Duju Tyuqji Tsl -Wingspan: 260 mm -Number: 3x tensioners available -Price: per piece -Dimensions: 300/80/H370 mm -Weight: 3.0 kg/piece

Year of construction: 1977, Condition: excellent (used), Table Ø: 200 mm Bore: 40mm Overall height: 90 mm Total height including lining: 160 mm Width: 420mm Bwshomb U Nqjx Dui Tsl Depth: 300mm Weight: 40kg