Used accessories and spare parts for milling machines for sale (281)

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Hjlhcceyf Dp Ejqqsfg Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Transport shots, crane shot Hfelhccqecnf E Usqsg -Spare part: from a machining center, manufacturer Sigma, type Mission 5 -Hole: Ø 140 mm -Recess opening: Ø 80 mm -Bolt circle: Ø 110 mm -Quantity: 4 pieces available -Price: complete -Weight: 23 kg

Condition: good (used), Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount Holhccey H Ivmsqqjfg -Dimensions: 910/1120/H510 mm -Weight: 365 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm Hfslhccqsy H Itroqeg -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm Helhey H Itljccqqjfg -Weight: 355 kg

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Holhceyqwxdecqqefg Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Year of manufacture: 2011 Weight: 26,000 kg

Condition: good (used), Tool holder for SK 40 chucks -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant Hslhccqjdm Supeqsfg -resistant to: mineral oil and various chemicals -Price: complete

Condition: used, diameter div. number 44x Holhcoxyzxfscqqjfg tool adaptor SK 40

Condition: used, diameter div. number 36x Hslhccjww Nb Eeqqefg tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Hfelhccqsww Nbxjqjg

Condition: used, diameter div. Hfslhceww Nbfjcqqeg number 40x tool adaptor BT 40

Condition: used, diameter div. number 56x tool adaptor BT 40 Hjlhewtrzyjccqqofg

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS SK 50 Hfelowtrztshccqqog Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: used, diameter div. number 36x Hslhccqewtrzgsqsfg tool adaptor SK 40

Condition: used, Universal boring head STANKO Spindle tool, spindle head Tool holder: SK 40 - M16 Adjustment bushing holder: Ø 36 mm Adjustment range: 17.5 mm Hslhccqjxciv Deqefg Adjustment accuracy: 0.01 mm Tool shank: Ø 18/22 mm Machining diameter: approx. 10-45 mm - Adapter SK40 to adjustment bushing Ø 36 mm - Boring head with adjustment bushing shank Ø 36 mm Net weight: 5 kg Very good condition

Condition: used, A large selection of SK40 tool holders, including mounted milling cutters, drills, and threading tools from workshop/industrial inventory, is available for sale. Mainly available: * SK40 shrink-fit holders * SK40 collet chucks / ER holders * SK40 tapping chucks * SK40 screw-in holders / Weldon holders * Various special adapters and milling heads Some holders are already equipped with: * Solid carbide end mills * Thread milling cutters * Thread taps * Drills * Face mills Hfjlhccqjy Rmfhsqog Various manufacturers, diameters, and designs available. Condition ranges from very good to used. ❗ Prices vary depending on the holder, tool, manufacturer, and condition. Therefore, please provide specific inquiries including: * Desired holder * Diameter / type * Ideally with a marked image or screenshot 📍 On-site inspection is expressly preferred to avoid any mix-ups and to allow direct inspection of the tools.

Condition: used, Universal facing and boring head WOHLHAUPTER type UPA 3 Hslhccqoy Ehyieqsfg Spindle tool, spindle head (suitable for DECKEL) Manuf. No. 40769 Tool holder: MK 4 - S20x2 Tool holder: SK 40 - S20x2 Shaft tool holder: Ø 18 mm Adjustment accuracy: 0.01 mm - with adapter sleeve MK4 to SK40 - Accessories as shown - Storage case Net weight (spindle head only): 2.8 kg Weight with storage case: 6 kg good condition

Condition: good (used), Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 160 mm Hslopul U Hehccqqefg -Type: 34-14M-85 - Pitch: 14 mm / belt width approx. 85 mm -Receptacle: Taper clamping bushing optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 160 x 100 mm -Weight: 7.5 kg

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 3x timing belt pulleys available -Price: per piece Hfolhcjy Aklvecqqog -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping screw set with storage box -Type: various designs, see photos -Thread: M20 -Price/Fee: complete Hfelhccqeu Npgweqog -Box dimensions: 380/315/H60 mm Total weight: 11.7 kg

Condition: good (used), Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 95 mm -Clamping height: 85 mm -Number: 4x tensioners available -Price: per piece Holoyzmkljhccqqofg -Dimensions: 180/35/H70 mm -Weight: 1.0 kg/piece

Condition: good (used), Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 54 mm -Clamping height: 58 mm -Number: 4x tensioners available -Price: per piece -Dimensions: 135/35/H70 mm Hfjlhjyzgfveccqqeg -Weight: 0.9 kg/piece

Year of construction: 2002, condition: good (used), Hinge width 300 mm Hfsljmdqx Hehccqqsg Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), ///// PRICE LISTED PER 1 PIECE ///// Manufacturer: ALGRA Type / markings: Hfoloyz A U Hehccqqeg D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 I am offering ALGRA drive gearboxes used in metalworking machines. These components serve the function of power transmission and feed rate adjustment, most commonly used in: - conventional milling machines - machining centers - industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical condition Condition: used Show normal signs of use Mechanically complete Knobs and mechanisms operate correctly Possible storage marks 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Application - feed drive for X/Y/Z axes - machine tool gear systems - spare parts for milling machines and industrial equipment - maintenance / machine servicing ℹ️ Additional information Markings stamped on the housings (visible in the photos) Inspection plates "QS-IN PRÜFUNG" Oil-filled design (sealed gearbox) Possibility to sell individually 🚚 Shipping Shipping via courier or on pallet Personal collection possible

Condition: repair required (used), Hydraulic vise, machine vise, NC compact clamp Hfelhceb A Ik Dscqqsg -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg