Universal swivel-tilt-rotary table for milling machine (original FRIEDRICH DECKEL), universal millin

DECKEL

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Giodpfxsy Rta Eo Aqxet Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Mounting elements BNV 150/4

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,391 h, functionality: fully functional, machine/vehicle number: 11160000853, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-Axis Travel: 600 mm Y-Axis Travel: 700 mm Z-Axis Travel: 600 mm Maximum Spindle Speed: 12,000 rpm X-Axis Feed Rate: 20 – 15,000 mm/min Y-Axis Feed Rate: 20 – 15,000 mm/min Z-Axis Feed Rate: 20 – 15,000 mm/min Rapid Traverse X-Axis: 40 m/min Rapid Traverse Y-Axis: 40 m/min Rapid Traverse Z-Axis: 40 m/min Linear Scale Resolution X-Axis: 0.001 mm Giodpsy Ni Aaefx Aqxjt Linear Scale Resolution Y-Axis: 0.001 mm Linear Scale Resolution Z-Axis: 0.001 mm Input Increment X-Axis: 0.001 mm Input Increment Y-Axis: 0.001 mm Input Increment Z-Axis: 0.001 mm Positioning Accuracy X-Axis: 0.01 mm Positioning Accuracy Y-Axis: 0.01 mm Positioning Accuracy Z-Axis: 0.01 mm Tool Holder: SK 40 NC Rotary Table Clamping Surface Diameter: 630 mm Max. Table Rotation Speed: 10.7 rpm Table Feed Rate: 3,600 /min Table Scale Resolution: 0.001 MACHINE DETAILS Control Manufacturer: Heidenhain Recorded Spindle Hours: 18,391 h Operating Voltage: 400 V Frequency: 50 Hz Rated Current: 80 A Connected Load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Machine Weight: 10,000 kg EQUIPMENT 60-station tool changer Chip conveyor Cooling system

Condition: good (used), Year of construction: 2011, Parts shown by hand not come. Giodey Sh Efepfx Aqxjt

Condition: like new (used), Year of construction: 2022, operating hours: 12,719 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain TNC 640 mit CELOS, workpiece weight (max.): 2,000 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 7,100 mm, table width: 850 mm, table length: 2,350 mm, rotational speed (min.): 15,000 rpm, spindle speed (min.): 15,000 rpm, Year of construction: 2022 CNC controller: Heidenhain TNC 640 mit CELOS Axes X-axis travel mm: 2000 Y-axis travel mm: 800 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: ±120 Rapid traverse m/min: 50 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 2350x850 Max. workpiece weight kg: 2000 Milling/turning table nc: Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 40 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 400 Max tool weight kg: 8 Chip-to-chip time s: from 7,5 Gjdpfxjy Shgvo Aqxeit Equipment Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET MPC – Machine Protection Control Automatic door Automation interface Machine running times Under power: 18669 Spindle Working: 12719 Basic machine dimensions / weight Length mm: 4500 Width mm: 7100 Height mm: 3200

Condition: used, x-travel 300 mm y-travel 160 mm z-travel 330 mm table surface area 600 x 200 mm table load capacity 200 kg Gijdpsy Sbkbjfx Aqxot Spindle Speed 40-2.000 U/min. tool taper SK40 dimensions 1200 x 1160 x 1800 mm machine weight ab. 800 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control – TOP Condition Technical Data: >> Year of manufacture: 2006 >> Control: Heidenhain iTNC 530 >> Travel (X/Y/Z): 500 / 450 / 400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable in X, Y, Z: up to 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 tool positions >> Clamping surface: Ø 500 x 380 mm Distance between T-slots: 63 / 14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control panel and accessories Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> High-pressure coolant supply (IKZ) 40 bar >> Coolant purification system (fleece filter system) >> Rinse gun Gisdpfx Aqey R Dgpoxst >> Visiport >> Measuring system with air purge >> Prepared for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all cooling and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers etc. fully cleaned. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in excellent condition. The main spindle has been overhauled (exchange spindle), fully serviced, and an acceptance protocol is available. Invoices for the overhaul totaling €42,000 (net) are available. You are welcome to view and test the machine under power at our premises.

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Gedswrdu Aopfx Aqxjit Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: DMG ErgoLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm Gjdpfx Aqey Ryyrexjit • Distance spindle center to table: 150 mm (Motor spindle) / 145 mm (Gear spindle)

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm Gsdohhuf Hopfx Aqxsit - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Gjdoym R Tgjpfx Aqxjit Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!