Spot welding machine

TECNA 2102

Condition: new, Year of construction: 2025, Seam welding Hedpfsh Nu A Nox Abnsfd

Condition: excellent (used), Here we offer a Heraeus heat and air circulation drying oven. Heraeus heating and air circulation drying oven up to 300 ° C Manufacturer / type: Heraeus UT 6060 Properties: Hjdpfsd Hpv Ajx Abnefd Temperature: 300 ° C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: Depth 403 mm, width 340 mm, height 380 mm External dimensions: Depth 744 mm, width 535 mm, height 552 mm Nominal voltage 230 v, rated frequency 50/60 Hz, rated current 6,8A, output 1, 50kW Including 2 deposits Type: UT 66060 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min - Max. Max. operating pressure 10 bar - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS - Electrical connection Voltage / frequency 400/50 V/Hz Hfodou Nhh Tspfx Abned - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch - Length 1520 mm - Height 1530 mm - Weight 291 kg

Condition: new, DRILL PRESS WITH BELT DRIVE DIGITAL DEPTH GAUGE, REVERSIBLE TABLE WITH INTEGRATED VISE AND SCORER LED LIGHT Quick-action keyless chuck 1 - 16 mm B18 CM 4 chuck attachment SUPPLIED. Drilling capacity on cast iron with Ø 32 mm pre-hole. Max drilling capacity on steel with pre-hole (s235jr) Ø 28 mm Continuous drilling capacity Ø 20 mm Morse taper 4 Spindle 1 - 16 mm B18 Approximate spindle speed (12) 150 - 2450 rpm Spindle stroke 120 mm Spindle sleeve ø 62 mm Column ø 92 mm Height 1720 mm Spindle-column distance 255 mm Distance from machine nose to table 700 mm Table dimensions 460 x 425 mm Distance machine nose-base 1220 mm Hollow 14 mm Clamp 210 x 165 mm Hodjm E Uhwjpfx Abnofd Single-phase motor 230 V 50 Hz 1.5 kW Net weight 135 kg Packaging dimensions 1415 x 655 x 320 h mm Gross weight 158.00 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Hsdpfx Abjx E Rdwsnofd Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Year of construction: 2022, condition: used, Used machine Year of manufacture: 2022 Condition: as new, only a few operating hours, not used in production Equipment and technical specifications: - Compact screw compressor with variable speed control and innovative LOGIN control system - With tank and refrigeration dryer - Maximum pressure: 10 bar - Effective delivery rate: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2" - Tank capacity: 270 litres (AD2000) Hfjdjxdplbopfx Abnsd - Frequency controlled - Electronic control - Oil heat exchanger - Compressed air tank galvanized inside and outside - Drive transmission: Direct coupling - Switching: Star-delta - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: on request Location: Bavaria

Condition: excellent (used), functionality: fully functional, CECCATO CSM 5.5 X mini screw compressor Hedpsvurttsfx Abnjfd Power 4kw Working pressure 10bar Efficiency about 470l/min Noise level 62dB Dedicated dryer Air tank 270l

Condition: excellent (used), Year of construction: 2016, operating hours: 6,700 h, Kaeser SM 12 (2016) – Screw Compressor in Excellent Condition For sale: Kaeser SM 12 screw compressor from 2016 in excellent, well-maintained condition. Reliable, quiet, and energy-efficient compressor – ideal for workshops, print shops, or manufacturing facilities. Technical specifications: Manufacturer: Kaeser Kompressoren Model: SM 12 Year of manufacture: 2016 Hfsdpfsxprwksx Abnjd Motor power: 7.5 kW Free air delivery: approx. 1.1 – 1.3 m³/min (depending on pressure level) Operating pressure: 8 / 10 bar Voltage: 400 V / 50 Hz Integrated Kaeser Sigma Control Basic Low-noise operation, compact design

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Hfodpfx Ajupzmuobnsd Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: good (used), Good working condition. Please check out our other listings as well. Hfedpfx Asn Uv Ulsbnjd