Used Tecna Spot Welding Machine for sale (14)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. Ibjdpfszx D Tcsx Al Seb The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: like new (used), Power at 50%: 35kVA Short circuit-current: 15,5kA Electrode force: 470daN / double stroke Throat depth: 400mm --- Weld control: TE 101 (8-times, 100-program) Iedpezl A S Refx Al Sjbb --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 Ibodpfx Alog U A Uzs Sjb - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new

Condition: like new (used), Year of construction: 2020, Power at 50%: 25kVA Short circuit-current: 18kA Electrode force: 240daN Throat depth: 230-550mm --- Weld control: TE101 (13-parameters, 99-program) --- Extra Equipment: Ibodpfszgxfijx Al Seb - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Isdpfx Aloh N Sd Uo Sjbb Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Iodpfx Alol Smn Ss Sjbb Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 1996, condition: good (used), machine/vehicle number: 01049, Offer 22461 Technical data: - Rated power at 50% duty cycle 35 kVA - Max. welding power 75 kVA Ijdpfx Alsimbmro Ssbb - Adjustable overhang 280 to 600 mm - Stroke 5 to 50 mm - Welding parameters, steel sheet approx. 4 + 4 mm - Electrode force adjustable up to 44.5 daN - Cooling water flow rate 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - Including: - Single-phase control unit T 90 Mark II - Foot switch

Condition: good (used), Year of construction: 1985, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 Ibedpfxok Aubxj Al Sob -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg

Condition: new, Year of construction: 2025, Power rating at 50%: 2,5kVA Short-circuit current: 8,2kA Electrode force: 120daN (at 125mm Throat depth) weight: 11kg --- with Electrode arm 125mm --- welding control --- Ibodpoxl Uqxofx Al Sob warranty: 12 months

Condition: good (used), Tecna Saima D2 pasta sheeting machine with built in mixer. Produces 300mm pasta sheet. Iedpfx Ajn Utypjl Sobb

Condition: good (used), Balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9312 Ibedpfx Aev U I S Ssl Sjb -Load capacity: 1 - 2 kg -Rope length: 1600 mm -Number: 1x spring balancer available -Dimensions: 200/110/H55 mm -Own weight: 0.6 kg

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9190 -Load capacity: 0.4 - 1 kg -Rope length: 1600 mm -Number: 1x spring balancer available -Dimensions: 180/110/H55 mm Iedpfx Alsvqbgzo Ssbb -Own weight: 0.6 kg

Condition: used, functionality: fully functional, Functionality tested; item originates from the dismantling of equipment at an automotive supplier. Manufacturer: TECNA Type: 9337 Load range: 4–6 kg Cable length: 2.0 m Housing: Aluminum die-cast Ibjdszmm Raopfx Al Sjb Suspension: Swivel with safety locking mechanism Application: Tool load balancing, assembly lines Safety lock: integrated

Condition: used, Balancer, machine balancer, spring balancer, cable extension, weight balancer -Manufacturer: Tecna, spring balancer type 9181 in original packaging -Load capacity: 10 - 14 kg -Rope length: 2500 mm -Quantity: 2x spring balancer available -Price per piece Isdpjq Untvefx Al Sebb -Dimensions of cardboard: 270/200/100 mm -Net weight: 3,8 kg