Travelling column milling machine

Soraluce FP 6000

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW Kdsdpfxjvwgl Aj Afqer spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC Kdjdoy H Dahspfx Afqsr MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,400 mm, CNC HEIDENHAIN iTNC 530 X-AXIS STROKE 6000 MM Y-AXIS STROKE 1400 MM Z-AXIS STROKE (VERTICAL) 2500 MM SPINDLE CONNECTION ISO 50 DIN 69871-B50 SPINDLE SPEED 5000 RPM MOTOR POWER S1 37 KW - S6 56 KW AUTOMATIC INDEX HEAD 1 ° X 2.5 ° TOOL CHANGER 40 PLACES COOLANT TROUGH THE SPINDLE AND EXTERNAL Kedpfx Afexhqivjqedr CHIP CONVEYOR ANCHORING PLATE 8000 X 2000 MM PERIMETER PROTECTIONS

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Kjdpfx Aoy Rzklsfqodr Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change Kdedpfjyviigsx Afqer ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Kedpfx Aoyn Em Rjfqjdr Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 5,000 rpm, SPINDLE TAPER ISO 50 X LONG. TRAVEL MM.6000 Z SADDLE TRAVEL MM.1250 Kjdpewz H Rfjfx Afqjdr Y VERTICAL TRAVEL MM.2000 SPINDLE SPEED RPM.5000 FEEDS MM/MIN.8000 SPINDLE MOTOR POWER KW. 37 CNC HEIDENHAIN iTNC 530 REMOTE HAND WEEL FLOOR PLATES 7000x2000- 15 TON/MQ. TABLE 1080 X 7220 X H 820 MM ATC.40 CHIP CONVEYOR ROTATING HEAD IN CONTINUOUS TUPC 0,001°x0,001° COOLANT THROUGH THE SPINDLE 20bar FUNCTION RTCP FPT AUTOCAL EXTERNAL COOLANT TANK HEIGH & LOW PRESSURE WITH PAPER FILTER N.2 AUTOMATIC HORIZONTAL DIVIDERS WITH 2 SUPPORT TABLES N.1 PIECE PROBE

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Kdjdpfx Ajxmd S Iofqer Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2052582, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: Haas, table width: 914 mm, table length: 1,626 mm, table load: 4,536 kg, rotary table diameter: 760 mm, rotational speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Condition: very good (used) 4-axis horizontal machining center Brand: Haas Equipment: Tool holder SK50 Tool positions: 30+1 Year of manufacture: 03/2008 Kodow Uz Anopfx Afqedr Weight: 13,600 kg Additional information: Machine has been newly painted Price on request

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Kjdpfsyid Iysx Afqedr Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.