CNC plasma cutting machine

Messer Cutting Systems MetalMaster 2.0 6025

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Ledpsykbimsfx Alcohk Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, total length: 6,000 mm, total width: 2,430 mm, load capacity: 4,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder Lsdpfx Ajy A Huaslcshk – Capacity: 4,000 kg – Lifting height: 6 m – Year of manufacture: 2021 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 3m / M6 Dimensions – Span: 6,000 mm (center-to-center) – Installation height: 350 mm – Width of wheel set incl. buffers: 2,430 mm – Wheelbase: 1,900 mm – Weight: 1,310 kg – Suitable for crane rail: 50×30 mm Speeds – Lifting: 0.39 to 4 m/min (variable) – Trolley travel: 1 to 20 m/min (variable) – Crane travel: 1 to 20 m/min (variable) Features – Control: radio control – Crane manual included: yes – Condition: like new, used for only 2 years – Dismantling date: early May 2026 – 5 units available – Steel structure and conductor systems also available (34.5 m)

Condition: used, Year of construction: 2008, machine/vehicle number: 32063, functionality: fully functional, operating hours: 28,800 h, power: 42 kW (57.10 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, table length: 6,100 mm, total length: 8,000 mm, total width: 3,200 mm, total height: 3,800 mm, overall weight: 35,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, For sale is a powerful and reliable CNC press brake, type LVD PPEB 320/61, ideal for precise bending operations in sheet metal processing. Manufacturer: LVD Model: PPEB 320/61 Control: CNC Design: Robust, industrial design Suitable for: Heavy-duty and large-format bending operations Technical data: CNC-controlled back stops Hydraulic upper and lower tool clamping system Safety equipment according to industry standards 5 axes Press force: 320 t Bending length: 6,100 mm Frame width: approx. 5,050 mm Stroke: approx. 250 mm Installation height (table – ram): approx. 500 – 570 mm Condition: The machine is in used, operational condition. Regular maintenance has been performed. Inspection under power is possible by arrangement. Application areas: Steel and metal construction Mechanical engineering Series and single-part production Manufacturing of large-format sheet metal parts Advantages: High press force for demanding applications Large working length for a wide range of applications Proven LVD quality and reliability Precise CNC control for reproducible results Accessories: Many tools and dies, see PDF document The die for the lower tool is not included in the scope of delivery Terms of sale: Price applies ex-foundation Dismantling, removal, loading and transport are the responsibility of the buyer Ledpfxezhtlgj Alcehk Inspection possible by arrangement Delivery according to EXW (ex works)

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. Lhsdpfx Alsv Iaqyscek CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618019, Offer 24589 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm Lhsdjvnb Tpspfx Alcsk - weight approx. 200 kg

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2 x 4 m Lhodpoy Nqcbjfx Alcek 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console Extraction table 22726

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4 x 2 m Equipment: 1 KMT OEM SL-VI 50 PS 4,000 bar cutting head with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source High-voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive metering system Collision protection system Water treatment system TCI HIDROSYSTEM 2.0 Sludge removal system Software: Lantek Expert 2D with automatic nesting function 22726 Ljdpjykqwtefx Alcjhk

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Ledjxxu Dropfx Alcohk

Condition: new, Year of construction: 2026, functionality: fully functional, arm reach: 955 mm, type of input current: AC, total height: 955 mm, total width: 955 mm, total length: 955 mm, load capacity: 5 kg, control cabinet length: 5 mm, overall weight: 35 kg, input voltage: 230 V, type of cooling: air, protection type (IP code): IP62, FAIRINO COBOTS – MODERN AUTOMATION FOR YOUR BUSINESS We offer advanced FAIRINO collaborative robots (cobots) designed to increase productivity, improve quality, and enhance safety in manufacturing processes. Thanks to their intuitive operation, fast deployment, and excellent price-to-performance ratio, FAIRINO cobots are the ideal automation solution for small, medium-sized, and large enterprises. Why Choose FAIRINO Cobots? ✅ Safe human-robot collaboration without the need for expensive and complex safety fencing. ✅ Easy programming through hand-guiding, graphical programming, and a user-friendly interface. Lsdpfjzaz Eyox Alcjhk ✅ Fast return on investment through process automation and 24/7 operation capability. ✅ High precision and excellent repeatability for demanding industrial applications. ✅ Compact design that allows operation even in limited production spaces. ✅ Easy integration with vision systems, grippers, CNC machines, AGVs, and other automation equipment. Available Models The FAIRINO FR Series includes collaborative robots with payload capacities ranging from 3 kg to 30 kg, allowing the perfect solution for virtually any industrial application. Available models: • FR3 • FR5 • FR10 • FR16 • FR20 • FR30 Typical Applications • CNC machine tending • Welding and spot welding • Assembly and fastening operations • Packaging and palletizing • Quality inspection • Pick-and-place applications • Dispensing and gluing • Sorting and order fulfillment • Logistics and material handling automation Benefits for Your Business FAIRINO cobots help reduce production costs, increase operational efficiency, and improve process consistency and product quality. Their flexibility allows them to be quickly redeployed between workstations and adapted to new tasks, making them an ideal solution for modern Industry 4.0 manufacturing environments. Warranty and Support ✔ 12-month distributor warranty. ✔ Professional technical support and service coverage throughout Europe. ✔ Assistance with implementation, configuration, and integration into existing production processes. Contact us today to find the right FAIRINO cobot for your application and receive a customized automation solution tailored to your business needs.

Condition: new, Year of construction: 2025, laser power: 3,000 W, The 1530G is the ideal middle ground. This compact model saves a lot of space in your workshop due to the absence of a change table. At the same time, large format plates can be processed on this machine. Ideal for the entrepreneur who has a low to medium production requirement with a small floor space. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 3,000 W - Laser Wave length: 1020 nm – 1080 nm - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 0.8 G - Maximum simultaneous axes speed: 80 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen Ledovty E Ujpfx Alcjhk - Cutting table: 3000×1500 mm - Machine weight: ± 4,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== In addition, the machine is equipped with the following options: - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 3,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)