Waterjet cutting machine with plasma

TCI Cutting BP-C 4020

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 Bodpfx Abju U Hm Ajweda CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 propane oxy-fuel torches Oscillating conveyor table Beuting Donaldson DFPRO12 outdoor filter unit 17326ä

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m. Bdedpfx Aotp Dhpjbwoa  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with Skew Rotator beveling unit Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with Skew Rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm pierce 80 mm separation cut Extraction table: Beuting without filter unit Software: Omniwin with Bevel ä17326 Bdodpsx Dlwmjfx Abwsa

Condition: used, Year of construction: 2023, CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Donaldson DFPRO 6 Cyclopeel filtration system Bdsdpoyhd Rbefx Abwoa Cutting software: Omniwin Standard Availability: immediately ä17326

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) Bdsdevpalajpfx Abwja ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Bdsdpov Iaqysfx Abwsa

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Bodpfx Abjxxu Drsweda

Condition: ready for operation (used), Year of construction: 2017, This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us. Additional equipment • Energy chain for plasma operation • Environmentally friendly extraction system with sectional distribution • Automatic gas console for monitoring and controlling gas flow and pressure Machine Benefits Technical Machine Benefits • High-quality ac servo motors for movement • Automatic initial height detection via nozzle contact • Optimal cutting quality with customized gas mixture • Excellent extraction quality with designed cross distributors • Plasma and oxyfuel cutting • Total table elements: 4 • Dimensions per table element: 2080 × 2100 × 950 mm • Continuous usable work surface: 2000 x 8000 mm (vertical cutting), 1500 x 8000 mm (angled cutting) • Movement feed: 10 to 15000 mm/min rapid traverse: 25000 mm/min Bdodpfsx D R S Asx Abwoa • Double-sided, synchronized longitudinal drive via pinion and rack with brushless ac servo motors • PRO Nest Software included Extra Information Control Unit CNC path control with Windows 8.1 operating system 17" TFT color monitor - Touch Full HD IPC-based with AMD CPU 4x2.0 GHz SSD 64 GB, 4 GB RAM (upgradeable to 16 GB RAM) Ambient temperature +5°C to +45°C at max. 90% humidity, non-condensing 100-240 V AC input voltage Integrated network card Joystick for manual movement Remote maintenance service Cutting range: 0° to 50° vertical stroke Compressed air requirements: max. 7 bar, cleaning pressure 6-7 bar Sound level during filter cleaning: ≤ 75 dB(A)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, working range: 12,000 mm, sheet thickness (max.): 300 mm, sheet thickness steel (max.): 300 mm, sheet thickness aluminum (max.): 60 mm, cutting current: 300 A, warranty duration: 24 months, travel distance X-axis: 3,000 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 450 mm, type of cooling: water, One of the most advanced and efficient plasma cutting machines on the market! Thunder 3D is a plasma system capable of cutting and beveling steel plates, pipes, and profiles, as well as open sections such as H, L, C, and T beams. 100% MADE IN POLAND! Travel speed up to 60 m/min! Working area: 3000x12000 mm (other options available from 1500 mm to over 30,000 mm) Compatible with Hypertherm and Kjellberg plasma units. Optional gas torch (propane, acetylene, natural gas). 3D bevel head with a rotation angle of at least: ±93° on the A axis and at least: ±50° on the B axis. Bodpfxjxw Ihhs Abwsda Capable of cutting V, A, X, K, Y, and 2Y bevels. Access to Industry 4.0 application. For more detailed information, please contact us.