Used Doosan Dx55 for sale (295)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,500 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With chip conveyor and tool holders cone. Bledpsx Ttd Nsfx Abwjf

Condition: like new (used), functionality: fully functional, fuel type: diesel, overall weight: 21,000 kg, empty load weight: 21,000 kg, operation weight: 21,000 kg, Year of construction: 2022, operating hours: 60 h, Used Doosan DX210W Adjustable boom Central lubrication Air conditioning Camera 3rd hydraulic circuit Bjdeyyk Hhopfx Abwolf Tyres Woody 60 harvester head The machine was temporarily used for sorting round timber. Condition like new. Sale on behalf of customer.

Condition: used, machine/vehicle number: FBA11-2390-00377, Year of construction: 2015, operating hours: 7,513 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery voltage: 48 V, fork length: 120 mm, color: orange, 2015 Doosan Forklift Type B18T-7 48 volt E0583 2015 Fork positioner Lifting capacity: 1,800 kg Fork length: 1.20 m Triplex mast Including charger Test valid until 10/26 = Further Information = Blsdjyxg Dmopfx Abwsf Year of manufacture: 2015 Unladen weight: 3,356 kg Lifting capacity: 1,800 kg CE marking: yes Overall condition: average Technical condition: good Visual condition: average

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 12,714 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 34 kW (46.23 HP), drive type: Diesel, Diesel Forklift Mast type: Triplex Bjdpfjyv Tdzox Abwolf Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Solid rubber Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: DOOSAN D25S diesel forklift - 2.5 ton lifting capacity - year of manufacture: 2012 - side shifter - TRIPLEX free lift mast - overall height: 2.17 m - lifting height: 4.80 m - 12,714 operating hours according to the meter - forklift with 4-cylinder YANMAR diesel engine, 49 HP - mechanical hydraulic levers - solid rubber tires front approx. 70%, rear approx. 50% - LED work lights front and rear - simple, mechanical forklift - good condition - front loader can be inspected on site - affordable delivery options!! Features: Side shifter, 3rd valve, rear work light, front work light, heating, full cab.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Bsdsytkkfepfx Abwslf Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,060 h, load capacity: 3,500 kg, lifting height: 5,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,640 mm, power: 44 kW (59.82 HP), Equipment: lighting, sideshift, trailer coupling, Diesel Forklift DOOSAN D35C-5 Year of manufacture: 2010 According to hour meter: 8,060 hours Lifting capacity: 3.5 tons Overall height: 2.64 meters Lifting height: 5.65 meters 43.7 kW Yanmar engine Bledpfxeyvy Dno Abwsf - Triplex full free lift mast - Sideshift - Fork positioner - Wide fork carriage - Twin tires - Lighting system - Original, immediately ready-for-use condition with original paint! - Simple forklift with minimal electronics! Selling price: €10,900 net Affordable delivery also possible!

Condition: used, Table: 1200 x 540 mm X Axis: 1020 mm / Y Axis: 540 mm / Z Axis: 530 mm Z Clearance: 150 ~ 680 mm Table Load Capacity: 1000 kg Spindle: 8000 rpm Spindle: ISO 40 / 15/11 kW Automatic Tool Changer: BT40 Tool Holder / 30 Tools Blsdpfjyxnk Isx Abwof Machine Weight: 7,000 kg

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Sub-spindle (if equipped) • Speed: 4,500 rpm • Nose: ASA A2-5 • Bore: 62 mm • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock Blsdpfx Asytt A Rebwjf • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2009, operating hours: 42,497 h, functionality: fully functional, machine/vehicle number: L2203458, turning diameter: 510 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, bar diameter (max.): 32 mm, overall weight: 3,500 kg, Machine type: CNC lathe Manufacturer: Doosan Model: Lynx 220A Year of manufacture: 02/2009 Operating hours: 42,497h (power-on hours, as of 17.12.2025) Max. turning diameter: 510 mm X-axis travel: 175 mm Z-axis travel: 330 mm Bljdpfx Ajyxn D Isbwsf Spindle speed: 6,000 rpm Spindle power: 11 kW Tool changer: 12 positions Bar feeder: Ø8-32 mm Weight: 3,500 kg Transport, collection, and dismantling must be organized by the buyer.

Condition: used, Year of construction: 2016, Technical details: travel: 1300 mm length: 670 mm width: 625 mm control: Heidenhain TNC 620 spindle turning speed range: 12000 1/min table load: 1300 kg tool change unit: 40 Pos. spindle taper ISO: SK 40 spindle: 17 / 10 kW dimensions of the machine ca.: 3,35 x 2,60 x 3,10 m weight: 8,5 t : 40 kVA rapid traverse: 36 / 36 / 30 m/min vertical machining center, touch probe RENISHAW OMP 40-2, coolant tank 325 l / incl. 20 bar high pressure pump (internal coolant supply) air through spindle, el. handwheel, oil-mist suction, chipconveyor, flush gun, approx. 13.000h "machine on", approx. 3.000h "spindle on" inspection under power in factory is still possible Blsdpfx Asytrw Hebwjf *

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Blsdpfjyfxv Tsx Abwef 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Blsdpfxsv Iq Ezj Abwjf Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm Blodpfx Aboyr R A Ejwof • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 2000 Number of axis 2 Movement X-Axis Movement 352 mm Z-Axis Movement 1105 mm This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Blsdpfx Ajx D Dtaobwof Application Types Turning

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Blodpfxex E Eams Abwef Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1435, turning length: 648 mm, turning diameter: 420 mm, spindle bore: 76 mm, spindle speed (min.): 45 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 20 m/min, rotational speed (max.): 4,500 rpm, feed rate Z-axis: 24 m/min, overall weight: 4,100 kg, center height: 240 mm, Equipment: rotational speed infinitely variable, Very nice PUMA 240MSB Bsdpfjywkwhjx Abwolf With sub-spindle and driven tools And chip conveyor. Very low operating hours. 8000 hours power on Sub-spindle max 6000 RPM Control 18ITS with Manual Guide Bar Feeder LNS

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof Bljdpfx Abeyxkucswof = Further information = Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: excellent (used), Year of construction: 2019, operating hours: 14,553 h, functionality: fully functional, machine/vehicle number: ML0405-000122, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, bar passage: 51 mm, bar diameter (max.): 51 mm, Equipment: documentation/manual, In addition to the lathe, a TOP AUTOMAZIONI FU350SX bar feeder, year 2020, is also for sale. The price is for the complete set. Bledpfx Absyym Smswof

Condition: used, Year of construction: 2011, operating hours: 10,690 h, Year of manufacture: 2011 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 7.533 m Bsdpfx Aox Hgr Hobwslf

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,640 h, Year of manufacture: 2014 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3 Bsdpfx Ajxqfciebwolf

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Blsdpfoyx U Nwox Abwsf

Condition: ready for operation (used), Year of construction: 2024, operating hours: 30 h, overall weight: 34 kg, number of axes: 6, This 6-axis DOOSAN M0617 was manufactured in 2024. It features a maximum range of 1,700 mm and a load capacity of 6 kg, making it suitable for various applications. If you are looking to get high-quality collaborative robot capabilities, consider the DOOSAN M0617 machine we have for sale. Contact us for further details. • Load capacity: 6 kg • Max. range: 1,700 mm Bsdpfxeypkq Re Abwelf • Repeat accuracy: +/-0.01 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Bledpfx Ajx D H Aqsbwef Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mm Maximum opening 170 mm

Condition: ready for operation (used), Year of construction: 2006, spindle motor power: 22,000 W, spindle speed (max.): 3,600 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, controller manufacturer: FANUC, number of axes: 6, This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. • Max turning diameter: 330 mm (12.99 in); upper turret: 390 mm • Max turning length: 500 mm (19.6 in) • Bar capacity (main spindle): 76 mm (2.99 in) Blodpfex Rd Hvex Abwef • Travels: X 250 mm (9.84 in), Y ±50 mm (±1.97 in), Z 580 mm (22.8 in) • Sub spindle speed: 6000 rpm • Sub spindle motor power: 7.5 / 11 kW • Notes: Series introduced mid-2000s

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Bodpfx Ajx D Drvobwjlf Additional equipment • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Extra Information Machine still under power