Used Doosan B15R-5 for sale (269)

Condition: like new (used), Year of construction: 2017, operating hours: 2,450 h, functionality: fully functional, Machine with 4+1 axis operation CNC FANUC Like new condition, with only 5,000 operating hours and 2,450 spindle hours Spindle DIN 12,000 rpm with coolant system Chip conveyor 60-position tool changer High-pressure coolant through the spindle RENISHAW TS-27 tool presetter Roof with motorized top opening for crane loading Codpo Ah T Nnsfx Ahyori Overhead table, 700mm diameter, with threaded holes for fixture positioning (removable)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, feed rate X-axis: 45,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Specifications Chip conveyor and set of tool holder. With hydraulic clamp with control unit. Table dimensions: 1200x540 mm Capacity Longitudinal X-travel: 1270 mm Cross Y-travel: 670 mm Vertical Z-travel: 625 mm Spindle Spindle nose: SK40 ISO Credpfx Ahe Ah S Etsyei Spindle speed: 12000 giri/min. Motor power: 18,5 Kw Rapid X,Y,Z axis: 45000 mm/min Tool Stations: 30 nr.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MV0083-000047, overall weight: 5,500 kg, DOOSAN DNM 200/5AX – CNC 5-axis machining center – Year of manufacture 2015 For sale is a well-maintained DOOSAN CNC machining center, model DNM 200/5AX, in very good condition. Csde Ahkdqopfx Ahyjri Technical data: Year of manufacture: September 2015 Travel distances X / Y / Z: 400 / 435 / 500 mm Spindle speed: up to 12,000 rpm Spindle power: 18.5 / 11 kW Rotary table diameter: 200 mm A-axis: +30° to −120° C-axis: 360° Rapid traverse rate X / Y / Z: 36 / 36 / 30 m/min Machine weight: 5,500 kg Connection: 380 V, 50/60 Hz

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Csdpfo Ah E S Hsx Ahysri Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport Crjdpe Af U Ezsfx Ahyei -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. Codpfx Ahe Ahpqmoyeri - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN Mynx 7500 was manufactured in 2011. It features an impressive X-axis travel of 1,525 mm, Y-axis travel of 762 mm, and Z-axis travel of 625 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the DOOSAN Mynx 7500 vertical machining centre we have for sale. Contact us for further details. - Control Unit: DOOSAN-FANUC i Series - Tool Changer Capacity: 30 stations - Through-Spindle Coolant (TSC): 20 bar - External Coolant: Yes - Measuring Probe: Renishaw probe - Operating Hours - Cutting Time: 40,592 h - Operating Hours - Cycle Time: 2,760 h - Operating Hours - Part Count: 277 - Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz - Rated Power: 38.35 kVA - Full Load Current: 137.34 A - Interrupting Capacity: 5 kA - Short Circuit Capacity: 10 kA - Total Machine Weight: 13,500 kg Technical Specification Taper Size SK 40 Csde Ah Exdepfx Ahyjri

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 60, tool weight: 8,000 g, number of axes: 5, This 5-axis DOOSAN VCF850LSR-II was manufactured in 2021. It features an impressive X-axis travel of 3,000 mm, Y-axis travel of 850 mm, and Z-axis travel of 800 mm. The machine includes a robust tool magazine capacity of 60 tools and a maximum load on the fixed table of 3,500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VCF850LSR-II vertical machining centre we have for sale. Contact us for further details. • Operating hours: approx. 2,500 effective hours • Travels: • B-axis: ±110° • C-axis: ±360° • Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min • Max working feed (X/Y/Z): 20,000 mm/min • Spindle: • Power: 24 / 30 kW • Max torque: 121 / 155 Nm • Taper: ISO 40 • Tool magazine: • Capacity: 60 tools • Max tool dia.: 76 mm (130 mm with adjacent positions free) • Max tool length: 300 mm • Tool-to-tool: 5.5 s • Chip-to-chip: 13 s • Workholding/table: • Fixed table: 3,500 × 870 mm, max load 3,500 kg • Rotary table: Ø 800 mm, max load 1,200 kg • Max workpiece Ø: 1,050 mm • Max workpiece height: 680 mm (vertical) / 1,095 mm (horizontal) • Measurement: Absolute linear scales on X/Y/Z • Features: Removable central door; Pendulum machining capability • Utilities: • Electrical: 400 V / 3 phases + ground • Required power: 63 kVA • Compressed air: 6 bar • Coolant tank capacity: 560 l • Condition: Very well maintained • Operational status: In production / under power • Extras: Videos with timestamp available on request • Transport: Reportedly can be transported in one piece Additional equipment • High-pressure through-spindle coolant, 70 bar • Cyclone coolant filtration • Chip conveyor • Renishaw RMP-60 workpiece probe • Renishaw RTS tool setting system • Original kinematic calibration ball • Heidenhain Advanced Function Set 1 • Heidenhain Advanced Function Set 2 • Dynamic Collision Monitoring (DCM) • Lift-Off function • DXF converter • 3D toolpath visualization • 3D machining simulation • CAD Viewer • Automatic lubrication system • Hydraulic unit • LED work area lighting • 3-color alarm lamp • CE documentation Crsdpfoz S Hz Ujx Ahyji • Machine manuals Technical Specification Taper Size ISO 40

Condition: excellent (used), power: 113 kW (153.64 HP), overall weight: 19,000 kg, tire size: 315/70R22.5, tire condition: 90 %, Year of construction: 2017, operating hours: 8,960 h, Equipment: air conditioning, Doosan DX170W-5 year: 2017 operation hours: 8.960 hrs. ROPS Airco Cjdpfo Ah Hghex Ahysri Radio Back drive camera hydr. 2 piece boom stick: 2,50 meter all hydr. lines (hammer-, gripper-, scissor-) Quick coupler Engcon QS70 1 x Bucket with 2000mm width central lubrication tyres size 315/70R22.5 : approx 90% good blade support ( 2.5m width ) CE Engine with 113kW operation weight: 19 to.

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; Codpfxe Aggdhj Ahyori 850 mm turning diameter; no driven tools; good condition; chip conveyor; various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; ideal for dry machining.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Machine parameters: Travel in X, Y, and Z axes: Csdoz Iw Ddopfx Ahysri 1270 x 670 x 625 mm Table clamping area: 1300 x 670 mm Description: The machine is in good technical condition, and testing is possible by prior arrangement. It features a FANUC control system. The machine has a cast iron construction, linear guides, travel in the X/Y/Z axes of 1270/670/625 mm, table dimensions with clamping "T" slots of 1300 x 670 mm, table load capacity of 1000 kg, and a tool changer with 30 positions. Extensive accessories include: a 4th axis (rotary table), a hydraulic vice, a RENISHAW tool and workpiece probe, an oil skimmer, a three-color light signaling system, a chip conveyor, a Filtermist 6002 emulsion mist extractor, tool holders, etc.

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Crodoymc Ngjpfx Ahysi Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Crodpfxoz Apb Tj Ahyoi Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER Cjdpfxjy Tvbks Ahyjri YEAR OF MANUFACTURE: 2019 CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 490 mm, travel distance Z-axis: 780 mm, DOOSAN PUMA V550M – CNC Vertical Turning Lathe Manufacturer: DOOSAN Codpfxez Albco Ahyori Model: PUMA V550M Year: 2013 CNC Control: FANUC i-Series Machine Type: CNC Vertical Turning Lathe with C-Axis and Live Tools Machine Weight: 9,000 kg Machine Dimensions: 1,905 x 3,365 x 3,350 mm Maximum Swing Diameter: 800 mm Maximum Swing Over Carriage: 490 mm Maximum Turning Diameter: 730 mm Maximum Turning Height: 750 mm Maximum Load Capacity on Chuck: 650 kg Chuck Diameter: 390 mm Spindle Nose: ASA A2-11 Spindle Speed: 20 – 2,000 rpm Spindle Motor Power: 30 / 37 kW Automatic Spindle Speed Ranges: 2 C-Axis: ±360° with 0.001° angular positioning and hydraulic clamping X-Axis Travel: 490 mm Z-Axis Travel: 780 mm X-Axis Rapid Traverse: 12,000 mm/min Z-Axis Rapid Traverse: 16,000 mm/min C-Axis Rapid Speed: 200 rpm Turret: BMT-75 Turret Stations: 12 positions, suitable for live tools Live Tool Speed: 30 – 3,000 rpm Live Tool Motor Power: 3.7 / 5.5 kW Tool Size: 32 x 32 mm / Ø50 mm Live Tool Holders: 4 included, 2 radial and 2 axial Additional Tooling: Various fixed tool holders Automation Preparation: Automatic side door for loading automation Coolant System: Coolant tank with high-pressure pump Chip Removal: Rear chip conveyor Documentation: Manuals, electrical diagrams and EC/CE Declaration

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package Codpfx Aezzdh Eohyjri - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: MVH1009, travel distance X-axis: 610 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 510 mm, overall weight: 5,000 kg, spindle speed (max.): 8,000 rpm, Doosna VM50 Machining Center, fully functional, Siemens control. Spindle taper: BT40 Spindle speed: 0 – 8000 rpm Work table: 700 × 520 mm Axis travel: X=610 mm / Y=760 mm / Z=510 mm Tool magazine: ATC 12 (with arm) Equipment: Automatic tool changer ATC 12 Chip conveyor Spindle coolant system Credpfx Ahez S Awlsyei

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Csdpfx Ahjz Ehvfeyori Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,235 h, Internal combustion forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8235 Own weight (kg): 12197 Load capacity (kg): 9000 Lifting height (mm): 3100 Cedpfxsz E S Eqo Ahyeri Side shift forks Mast type: STD Fuel type: diesel Recently underwent a major technical inspection at 8060 operating hours. - new tires - new forks - cylinder regeneration - transmission: discs + seals - brakes: discs and bearings - all oils, fluids, and filters Technical condition: used, good

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,738 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: i series, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details. • A axis travel: +30° ~ -120° • C axis travel: 360° • Rapid feedrate (X/Y/Z): 40 / 40 / 36 m/min (1574.8 / 1574.8 / 1417.3 ipm) • Rapid feedrate (A/C): 20 / 30 r/min • Table size: Ø 630 mm (Ø 24.8 in) • Max. workpiece size: Ø 730 x 500 mm (Ø 28.7 x 19.7 in) • Max. workpiece weight: 500 kg (130.1 lb) • Total operating hours (ACCESO): 5679 H 6 M • Total working time (TMP LAV): 2748 H 23 M 44 S • Total cutting time (TEMPO TAGLIO): 2400 H 32 M 35 S • Total parts count (PEZZI TOTALI): 103 Crodpfez Hwgpsx Ahyei Additional equipment • Chip conveyor

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Crjdpfx Ajzw N E Ijhysi Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Table length: 1250 mm Crsdpoz Ihnajfx Ahyoi Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz • Rated power: 40,61 kVA Credpjzxy Ivofx Ahysi • Transformer capacity: 5 kVA • Full-load current: 64,67 A • Short-circuit capacity: 10 kA Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Crjdpfx Asyx U Nwohysi

Condition: like new (used), Year of construction: 2012, operating hours: 5,323 h, DOOSAN DNM 500 MACHINING CENTER CNC DOOSAN – FANUC i Series MANUAL GUIDE ONLY 5,323 CUTTING HOURS! YEAR OF FIRST INSTALLATION: 2012 TABLE SIZE: 1,200 mm x 540 mm TRAVELS: X: 1,020 mm Y: 540 mm Z: 510 mm SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 INTERNAL SPINDLE COOLING / HIGH PRESSURE Crsdpsz Hyyrsfx Ahyoi TOOL CHANGER: 30 POSITIONS NEW MIST EXTRACTION UNIT / AIR FILTRATION SYSTEM, TOP-MOUNTED, LOSMA BRAND CHIP CONVEYOR HIGH-PRESSURE PUMP WEIGHT: 7,000 KG COMPLETE DOCUMENTATION