Used Doosan Generator for sale (260)

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Rcedpfx Aeilfltsdqjd Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Rcsdpfx Ajnkcaaodqod Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm Rcodjvzln Rspfx Adqsd z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, Redpfx Adjzqtb Hoqjcd spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: used, Year of construction: 2017, operating hours: 7,480 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 348 cm Digging depth: 4.4 m Rcedpfxjy Nwuke Adqed = Additional options and accessories = - Central lubrication - Rubber tracks

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 Rcedoyr R A Eopfx Adqod • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Redozqzm Depfx Adqecd Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Automatic tool measuring arm.

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,640 h, Year of manufacture: 2019 Field of application: Construction Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = Rjdsxqfb Eepfx Adqscd - Rubber tracks

Condition: used, Year of construction: 2011, control FANUC Series 31i-MODEL A weight approx. 9.000 kg rated capacity 75,21 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Rjdpfxjzpzfws Adqecd

Condition: used, Year of construction: 2010, control FANUC Series 31i-MODEL A weight approx. 9.000 kg rated capacity 75,21 kVA Rcsdpezpzfqefx Adqjd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, lifting height: 4,650 mm, Year of construction: 2016, operating hours: 8,640 h, Year of manufacture: 2016 Empty weight: 8.500 kg Redpfx Asy Nw Absdqocd Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm Rcsdpfxey Tplis Adqsd travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm tool taper BMT 55 C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min work piece power 5,5 kW total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 76 mm, total width: 2,210 mm, total height: 2,480 mm, overall weight: 12,700 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 4,050 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details. • Number of axes: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Swing over bed: 800 mm • Swing over saddle: 620 mm • Max. turning diameter: Upper turret 390 mm; Lower turret 300 mm • Recommended turning diameter: 255 mm • Max. turning length: 350 mm • Main/left spindle motor power (30 min / cont): 26 / 22 kW • Main/left spindle nose: ASA A2-8 • Right/sub spindle max. speed: 3500 rpm • Right/sub spindle motor power (30 min / cont): 26 / 22 kW • Right/sub spindle nose: ASA A2-8 • C-axis indexing (C1 & C2): 360° in 0.001° increments • Upper turret travel (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Lower turret travel (X2/Z2): 190 / 900 mm • Sub-spindle B-axis travel: 810 mm • Rapid traverse (X1/X2): 20 m/min • Rapid traverse (Z1/Z2/B): 24 m/min • Rapid traverse (Y): 7.5 m/min • Turret stations: 24 total (12 upper + 12 lower) • Tooling type/interface: BMT65P • Indexing time: 0.2 s • Rotary tool spindle speed: 4000 rpm • Rotary tool motor power (15 min / cont): 5.5 / 1.5 kW • Machine electric power supply: 95.77 kVA Additional equipment • Chip conveyor • Various static tool holders • Rotary live tool holders Rjdpfx Adsznwf Dsqecd • Chucks on both spindles Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2019, operating hours: 2,100 h, functionality: fully functional, turning length: 3,028 mm, turning diameter over cross slide: 690 mm, turning diameter: 650 mm, spindle bore: 166 mm, DOOSAN PUMA 5100 XLMB CNC LATHE FANUC CONTROL 32i B YEAR 11/2019 , INSTALLED 2020 SWING OVER BED 900 MM SWING OVER SADDLE 690 MM MAX TURNING LENGTH 3028 MAX TURNING DIA 650 MM HYD CHUCK 550 MM DIA X 362 Z 3150 C 360 INDEXING 0.001 12 STATION TURRET BORING BAR 60 MM MAX RPM 1500 Rcodpfx Adoznu Dqsqed BAR CAPPACITY 166.37 MM TAILSTOCK - QUILL 120 DIA - NO 6 MT LIVE TOOLING SWARF CONVEYOR TOOL PRESETTER COOLANT SYSTEM HYD STEADY IS THERE BUT NOT FITTED TO MACHINE FULL LOAD 82 AMPS NETT WEIGHT 13.2 TON

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,850 h, Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks Rsdpfxoyn En Uo Adqocd

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 7,150 h, Year of manufacture: 2017 Rcjdpfexqfhlox Adqjd Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PT20SY0117, total height: 2,500 mm, total length: 4,100 mm, total width: 2,240 mm, overall weight: 12,000 kg, Control: Fanuc 18i - TB Swing over cross slide: Ø800 mm Max. cutting diameter: Ø620 mm Max. turning length: 740 mm Main spindle: speeds 50-5,000 rpm Spindle bore/Spindle nose: Ø76.2 / Ø68 Number of turrets: 12 B-axis: Ø810 mm Rotary tools: speed 50 – 4,000 rpm Rotary tool motor (turret one/turret two): 7.5/5 HP Rcodpfx Adszq A Dksqsd Rapid traverse (X/Z/Y): 790 / 20 m/min Sub spindle rapid traverse: 20 m/min Dimensions: Floor space: L = 4100 x W = 2240 x H = 2500 Machine weight: 12000 kg.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Spindle speed range: 45–4500 rpm Redpfx Adsx Ryrhoqscd Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Machine weight: 4,750 kg.

Condition: used, Year of construction: 2008, functionality: fully functional, CNC lathe, 2 axes, Doosan Puma 300B Year 2008 Excellent condition Fanuc 21iTB with manual guide Maximum turning diameter: 400 mm Maximum turning length: 650 mm Z-axis travel: 680 mm Spindle bore: 76 mm Chuck: 250 mm Tailstock Tool probe Rcodpfozpxi Tjx Adqjd Parts catcher Included with the machine: Chip conveyor Documentation

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Rcsdszpw Dpopfx Adqed Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg Rsdpfoq Nqkxox Adqecd HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2014, turning diameter 320 mm Rjdpfszl E Riex Adqecd turning length 510 mm control i Serie Fanuc swing diameter over bed slide 250 mm spindle turning speed - stepless 6000 U/min spindle bore 65 mm power capacity 15 kW total power requirement 20 kW weight of the machine ca. 3.5 t dimensions of the machine ca. 2,59 x 1,6 x 1,7 m Machine has chip conveyor and Tail stock. It has C- axe and live tooling. Control: Fanuc i series

Condition: used, Year of construction: 2017, operating hours: 524 h, load capacity: 3,000 kg, lifting height: 4,760 mm, free lift: 1,690 mm, fuel type: gas, mast type: triplex, construction height: 2,180 mm, drive type: Treibgas, Internal combustion forklift Mast type: Triplex Transmission: Automatic Rodpfxoyfy Aho Adqjcd Front tire type: Superelastic Front tire size: 650-10 Rear tire type: Superelastic Rear tire size: 28x9-15 Power steering; Windshield wiper; Operating weight with attachment: 4798 kg

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,320 h, Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 900 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m Rjdpfxozb Nc Ns Adqocd = Additional options and accessories = - Central lubrication

Condition: like new (used), Year of construction: 2020, operating hours: 4,300 h, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, feed length X-axis: 135 mm, feed length Z-axis: 530 mm, bar passage: 51 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 40 m/min, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, overall weight: 8,100 kg, Equipment: documentation/manual, We offer this Doosan PUMA TT1300SYB CNC turning and milling center, in like-new condition, manufactured in 2020. Manufacturer: Doosan Model: PUMA TT1300SYB Rjdpoyryymjfx Adqocd Year of manufacture: 2020 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or need further information, please do not hesitate to send us a message or call us. For sale: a nearly new Doosan PUMA TT1300SYYB from February 2020, with an LNS SPRINT 565 S2 automatic bar loader with motorized chucks and only 3,800 cutting hours. This is a high-end, multitasking CNC lathe with a dual spindle and dual motorized turret, featuring an independent Y-axis in both positions. A unique machine in its category, designed for complete machining in a single setup. -Synchronized dual spindle -Dual turret with powered tools -Upper and lower Y-axis (SYYB configuration) -Simultaneous machining of both sides -Drastic reduction in cycle times -High precision and thermal stability -Spindle speed up to 6,000 rpm -Bar capacity up to Ø51 mm -2 Hainbuch tool holders Special price: 165,000 EUR, WORKING HOURS: ONLY 3,800 CUTTING HOURS. Available for inspection and operational testing. Simultaneous machining with two turrets. Automatic transfer between main and sub-spindle. Possibility to finish the complete part in a single operation. Ideal for use with a bar feeder. Significant reduction in cycle times compared to a single-spindle lathe.