Used Doosan Dl400 for sale (260)

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, overall weight: 15,000 kg, chain condition: 90 %, Year of construction: 2019, operating hours: 4,930 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Doosan DX 140LCR-5 with adjustable boom and HS 10 attachment, with 4,080 operating hours, year of manufacture 12/2019. Major service and statutory UVV inspection recently completed. Price and attachments on request. Lasdpfoww T Aajx Ad Nsg

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof = Further information = Lifting capacity: 3,000 kg Lasdpfxsyxkuce Ad Nsg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A Laodpfx Aezvq Dpsd Neg --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Lasdpfxjy S S Epe Ad Nsg Manufacturer: Doosan Model: DL200 Year of manufacture: 2018 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 520 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 579 mm, spindle motor power: 18,500 W, total height: 1,700 mm, total length: 3,000 mm, total width: 1,600 mm, overall weight: 4,500 kg, chuck outer diameter: 250 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller model: FANUC 18i-TB, Equipment: documentation/manual, CNC turning center with FANUC 18i-TB control. Main spindle with 10" chuck, equiped with subspindle and Live tool (C-axis) Ljdpfx Adoyywufo Nsag max turning diameter ~13.8" (350 mm), max turning length ~20.5" (520 mm), bar capacity ~3.0" (76 mm), and spindle bore ~4.0" (102 mm).

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine Lsdpfxsx Ncpgo Ad Nsag 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray;

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Laodpfoiy Nppox Ad Neg Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 450 mm, turning diameter: 310 mm, CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Lsdpezvlnvsfx Ad Neag Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / drive capacity main spindle 11/9 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Control unit: FANUC i Series-TD Swing diameter over bed: 780 mm Max. turning diameter: 406 mm Max. turning length: 830 mm Max. bar capacity: 65 mm Chuck size: 8 inches (approx. 210 mm) Max. spindle speed: 4500 RPM Spindle motor power: 25 kW / 18.5 kW Max. torque: 247 Nm C-axis resolution: 0.001 degrees Tool stations: 12-fach Tool holder type: BMT 55P Speed of driven tools: 5000 rpm Power of driven tools: 5,5 kW X-axis travel: 260 mm Z-axis travel: 830 mm Lajdpjzw N T Sjfx Ad Nsg Rapid traverse rate (X / Z): 30 / 30 m/min Machine weight: approx. 5500 kg Dimensions (L x W x H): approx. 3530 x 1863 x 1900 mm Accessories, Equipment: - Chip conveyor - Coolant system - C-axis - Driven tool turret - Tailstock - Tool setter (Tool measuring arm) - Transformer - Signal lamp - Machine feet - Documentation Description:The machine was purchased as new in Hungary. It was used in a sheet metal processing company and has been barely used. It is currently under power and can be inspected in our showroom.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, - FANUC i Series TD - Max. turning diameter: 420 mm - Max. swing dia over bed 670–850 mm - Max. turning length 3190 mm - Spindle speed: 2800 RPM - Spindle motor power: 22–25 kW - Spindle bore / Chuck size: 102–132 mm / 12 inches - X-axis travel: 293 mm - Y-axis travel: ±65 mm - Z axis travel: 3190 mm - Live tool speed: 5000 rpm - Number of tool stations on the turret: 12 - Machine weight: approx. 13000 kg Accessories, features - Coolant unit - Chip conveyor - Tailstock - Hydraulic steady rest - C axis - Y axis - Live tool turret - Towel lamp - Transformer - Integrated hydraulics - 3 jaws hydraulic chuck - Tool eye (tool presetter) - Tool holders (live holders too) - Documentation The machine was owned by a sheet metal production company and the machine was barelly used. Very good condition. Under power in our showroom. Ledpfx Aozw N H Eed Nsag

Condition: excellent (used), power: 141 kW (191.71 HP), overall weight: 25,100 kg, Year of construction: 2017, operating hours: 7,862 h, Equipment: air conditioning, DOOSAN DX235LCR-5 Year: 2017 Operation hours: 7.862 hrs ROPS Radio back- drive camera Airco Hydr. 2 piece boom Stick : 3m central lubrication all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 70/55 quick coupler 1x Bucket with 800mm width U/C: 70% good trackshoes 600 mm width engine with 141.2kW Lsdszvbhfopfx Ad Njag CE Operation weight: 25.1 to.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET Lsdpfsq Nqkxsx Ad Nsag X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,700 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,383 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a horizontal machining center from the manufacturer Doosan. Operating hours: 11,320 h Spindle hours: 6,383 h The machine is in very good condition and can be inspected under power in our facility. Both clamping towers are included in the scope of delivery. Manufacturer: Doosan Model: HC 400 Year of manufacture: 2011 Control: Fanuc Series 32i-MODEL A Technical data: Travel X-Y-Z: 600x560x565 mm Lsdpeyl Iu Esfx Ad Neag B-axis: 1° increment (indexing table) Rapid traverse X-Y-Z: 40 m/min Feed rates: 20,000 mm/min Pallet size: 400x400 mm Spindle speed: 8,000 rpm Tool holder: SK40 Machine weight: 11,000 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: LNR-1043, turning length: 1,130 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,150 mm, type of input current: three-phase, MACHINE INFORMATION Manufacturer: Doosan Model: S550L Year: 2006 Condition: (Used) Good Serial Number: LNR-1043 Control: Fanuc Control Accessories: Tool Eye, Swarf Conveyor, 3 & 4 Jaw Chuck MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 102mm Chuck Size: 20″ 4 Jaw Chuck & 3 Jaw Chuck Distance Between Centres: 1130mm Max Cutting Diameter: 550mm Max Cutting Length: 1130mm Spindle Speed: 2500rpm Turret Positions: 12 Station Lasdpfszwnbnjx Ad Nog Swing: 710mm X Axis Travel: 315mm Z Axis Travel: 1,150mm Price: £22,000 + VAT

Condition: excellent (used), Year of construction: 2001, Vertical CNC lathe Brand: DAEWOO (DOOSAN) Type: PUMA V550 Year: 2001 (10,000 cutting hours) CNC: FANUC 18i-T Specifications: Turning capabilities: Maximum turning diameter: 800 mm Maximum workpiece diameter: 730 mm Maximum turning height: 750 mm Horizontal travel: 390 mm Vertical travel: 780 mm 3-jaw hydraulic chuck: Diameter: 500 mm Rotation speed: 20 to 2000 rpm Main motor power: 50/37 kW Dimensions (width x depth x height) without conveyor: 1,950 x 2720 x 3070 mm Weight: 9 tons Equipped with: 8-tool turret Set of turning tool holders Set of jaws Chip conveyor Ljdpfx Adozym Uxj Neag

Condition: used, Year of construction: 2016, Due to the large number of non-serious emails / emails will not be answered. Laedpfx Aszyw Ipjd Nsg WhatsApp "Errors, typos, and prior sale excepted."

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Lsdpfx Adszwhtks Neag Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Ljdevzln Repfx Ad Noag engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Year of construction: 2012, operating hours: 8,501 h, Equipment: all wheel drive, MAKE: DOOSAN TYPE: DX140 LCR YEAR: 2012 CE MARKED: YES Lasdpfxjzg Sfio Ad Nog OPERATING HOURS: 8501 HOURS TYRES/UNDERCARRIAGE: 50% POWER: 74KW ENGINE: CUMMINS QSB 4.5 WEIGHT: 14,800 KG OPTIONS: TRACK EXCAVATOR BLADE VA BOOM WORK LIGHT HAMMER LINES SORTING FUNCTION HYDRAULIC QUICK COUPLER AIR CONDITIONING KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 31i-5, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm Lsdpfx Adszt Rwqs Njag • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm; ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Fanuc control, Through Spindle Coolant, swarf conveyor Lajdpfx Aszqtb Hjd Nsg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Laedpfx Adjytkkfe Neg Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: excellent (used), Year of construction: 2017, operating hours: 2,742 h, functionality: fully functional, machine/vehicle number: MV0061-000661, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, controller manufacturer: Fanuc, workpiece length (max.): 800 mm, workpiece width (max.): 550 mm, workpiece height (max.): 460 mm, total height: 2,580 mm, total length: 3,260 mm, total width: 3,130 mm, table width: 570 mm, table height: 880 mm, table length: 860 mm, overall weight: 9,200 kg, distance table center to spindle nose: 720 mm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Doosan VC 510 (2017) – Vertical Machining Center with APC High-productivity 40-taper vertical machining center featuring a heavy-duty column-moving design and an integrated 2-pallet automatic pallet changer (APC). Key Specifications: Year: 2017 Control: Fanuc Travels (X / Y / Z): 762 × 516 × 570 mm Pallet Size (×2): 860 × 570 mm (Rotary APC, ~6 sec swap) Max Workpiece Size: 800 × 550 × 460 mm Lodpfx Aez Atqrsd Neag Max Table Load: 350 kg per pallet Spindle Motor: 18.5 / 15 kW Tool Changer (ATC): 30 Tools Rapid Traverse (X/Y/Z): 40 / 40 / 32 m/min Guideways: Heavy-duty Roller LM Guides Machine Weight: ~9,200 kg Excellent condition, fully maintained, and built for continuous high-speed production. Contact for inspection and further details.

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Laodpfexxkf Sox Ad Nsg Engine type: Doosan Doosan DL06 Stage IV

Condition: used, color: orange, Year of construction: 2017, operating hours: 6,300 h, Empty weight: 23.500 kg Ljdpfxozi Ecas Ad Noag Track width: 60 cm Digging depth: 10.795 m