Used Doosan Dl300 for sale (283)

Condition: excellent (used), Year of construction: 2024, turning length: 755 mm, spindle bore: 102 mm, travel distance X-axis: 260 mm, rotational speed (max.): 2,800 rpm, total height: 2,100 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 5,650 kg, CNC Lathe with c-axis Fedpfx Asy N Sb Eedloph DOOSAN - PUMA GT3100M MACH-ID 9615 Make: DOOSAN Type: PUMA GT3100M Control: Siemens 828D ShopTurn Year: 2024 Max. turning Ø: 790mm X-Axis: 260mm Z-Axis: 755mm Spindle bore: 102mm Speedrange: 2800Rpm Spindle power: 35kW ATC / revolver: 24 Speed live tools:5000Rpm Speed live tools:5000Rpm Power live tools:7.5kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 4200mm Width: 2100mm Height: 2100mm Weight: 5650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Fpodpfox Eivpex Adleh Height: 2800mm Weight: 22000kg

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 Fjdpfjxq R Evox Adljph drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2023, Key Technical Specifications - Brand / Model: DN Solutions (formerly Doosan) PUMA GT3100L - Year of Manufacture: May 2023 - Serial Number: ML0313-000510 - Power Supply: AC 380V – 3 Phases – 50/60 Hz - Nominal Capacity: 36.11 kVA (Full Load Current: 54.87 A) - Machine Weight: 6,900 kg (Maximum rigidity and stability) - Compliance: CE Certified What is this machine used for? The PUMA GT3100L is a heavy-duty, computer-numerical-control (CNC) horizontal turning center engineered for intensive machining of medium-to-large components. It excels at high-precision turning, facing, threading, and boring of high-value parts. This is the ideal production tool for demanding industrial sectors such as automotive, energy (oil & gas), hydraulics, and heavy precision mechanical engineering. Fpodpfx Adozbb Ikeleh How does it stand out from other models? - "L" (Long Bed) Configuration: Unlike standard compact variants, this long-bed version offers an extended turning length, allowing you to process long shafts and oversized workpieces without sacrificing structural rigidity. - Ultra-Robust 6.9-Ton Frame: Its massive cast-iron bed perfectly dampens vibration. This guarantees flawless geometric accuracy and significantly extends tool life, even during aggressive roughing cuts on hard alloys. - 2023 DN Solutions Generation: Benefiting from the manufacturer's recent rebranding and latest technological advances (formerly Doosan Machine Tools), this machine integrates modern electronics and high-efficiency motors (36.11 kVA), delivering an exceptional balance between high torque and energy efficiency.

Condition: used, Year of construction: 2011, machine/vehicle number: DWBHEDSOEB0050903, Operating weight: 21,500 kg, Power: 110 kW, Operating hours: approx. 3,500 h, equipped with quick coupler. NOTE: The concrete pulverizer shown in the pictures is not included with this item. Fsdpey Rvmzefx Adljph

Condition: used, Year of construction: 2016, machine/vehicle number: DHKCEWARHG5001071, Operating weight: 22,500 kg, power: 141.2 kW, operating hours: approx. 3,400 h, with blade support and adapter plate, manufacturer: LEHNHOFF Fpodey Rvmbepfx Adljh

Condition: used, Year of construction: 2017, machine/vehicle number: DHKCEBBVTH0001275, Operating weight: 24,400 kg, power: 124 kW, operating hours: 5,300 h, with quick coupler, manufacturer: LEHNHOFF Fjdpfxjy Rvmus Adljph

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST, Year 2012, Location: 78176 Blumberg Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Equipped with sub-spindle, lower turret, driven tools, and 80-position tool magazine. Hydraulic hollow chuck system Fpsdpfx Aeywax Isdloh 12-position lower tool turret with BMT 65 P Chuck air-blow system for spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the sub-spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-stage clamping pressure for main and sub-spindle Automatic shutdown after production end Hinged belt chip conveyor 2 x power chucks 200 mm 1 x radial AGW 1 x axial AGW Extended high-pressure and paper band coolant system 80-position tool magazine Further information available upon request. Commissioning and training available on request.

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Fodpfsxgz Utjx Adleph Serial number: N016 Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,048 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 530 mm, controller manufacturer: HEIDENHAIN, controller model: TNC620, total height: 3,000 mm, total width: 2,600 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,600 W, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DOOSAN VM 5400 was manufactured in 2019. It features an impressive X-axis travel of 1020 mm, Y-axis travel of 540 mm, and Z-axis travel of 530 mm. The machine includes a robust table size of 1200 x 540 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VM 5400 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: DIN 69871 • Max. spindle torque: 165.5 N·m • Spindle cooling: VM-series standard • Tool magazine: Side-mounted ATC, cam-type • Machine hours: • Control on time: 13,616 h • Machine on time: 12,530 h • Program run time: 6,963 h Fpodpoy Rrtwjfx Adloh • Axis motion time: 5,900 h • Spindle S1 time: 6,048 h Additional equipment • Workpiece probe installed • Tool length measurement probe installed Technical Specification Taper Size ISO 40

Condition: used, functionality: fully functional, machine/vehicle number: 0025, Year of construction: 2023, operating hours: 200 h, load capacity: 6,000 kg, lifting height: 4,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,540 mm, drive type: Diesel, Diesel forklift truck Chassis number: 0025 Mast type: Triplex Condition: Like new Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Fpedpfx Adoy Up Rzoleh Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windscreen, heater, load guard, soot filter, full cabin, air conditioning, twin tires, safety light, interior mirror, exterior mirror, beacon, wiper, LED,

Condition: used, functionality: fully functional, machine/vehicle number: 0195, Year of construction: 2023, operating hours: 255 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, total length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 0195 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Reconditioned without warranty Technical condition: Very good Front tires Type: Superelastic Fodpfoy Up N Dex Adloph Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Battery type: PzS Battery year of construction: 2023 Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, machine/vehicle number: 0032, Year of construction: 2016, operating hours: 4,000 h, load capacity: 4,500 kg, lifting height: 4,700 mm, free lift: 1,825 mm, fuel type: diesel, mast type: triplex, construction height: 2,325 mm, drive type: Diesel, Diesel forklift Chassis number: 0032 Mast type: Triplex Gearbox: Automatic Technical condition: very good Fsdpey Up Itofx Adloph Side shift, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, lifting height: 4,710 mm, free lift: 1,263 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Technical condition: normal Sideshifter, Fpjdpey Up Hcefx Adleh 3rd valve, 4th valve, rear work light, front work light,

Condition: used, functionality: fully functional, machine/vehicle number: 0400, Year of construction: 2018, operating hours: 1,330 h, load capacity: 3,000 kg, lifting height: 6,010 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 2,660 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 0400 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non Marking Rear tire type: Non Marking Side shifter, 3rd valve, 4th valve, rear work light, front work light, non-marking tires, Fsdpoy Up Dbofx Adloph

Condition: used, functionality: fully functional, machine/vehicle number: 0148, Year of construction: 2021, operating hours: 500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,195 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Chassis number: 0148 Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Fpsdpfx Adsy Up Awjloh Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, half cabin, windscreen wiper,

Condition: used, functionality: fully functional, machine/vehicle number: 0095, Year of construction: 2021, operating hours: 355 h, load capacity: 2,500 kg, lifting height: 3,500 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 0095 Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 625Ah Battery type: PzS Fpodsy Upz Topfx Adloh Battery year: 2021 Sideshift, fork positioner, 3rd valve, rear work light, front work light, roof cover, solenoid valve, safety light, interior mirror,

Condition: used, functionality: fully functional, machine/vehicle number: 2969, Year of construction: 2018, operating hours: 4,255 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,045 mm, power: 12 kW (16.32 HP), fork length: 1,200 mm, empty load weight: 3,190 kg, total length: 1,891 mm, drive type: Elektro, construction width: 1,090 mm, Electric 3-wheel forklift Chassis number: 2969 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 48V Battery Ah: 575Ah Battery type: PzS Fsdpfey Upn Tex Adlsph Battery year: 2018 Side shifter, 3rd valve, 4th valve, front work lights, overhead guard, CE certificate, seat,

Condition: used, functionality: fully functional, machine/vehicle number: 3003, Year of construction: 2015, operating hours: 4,372 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, power: 10 kW (13.60 HP), drive type: Elektro, Electric 3-wheel forklift Chassis number: 3003 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Super elastic Fodpfsy Upnmjx Adloph Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire condition: 60 - 80% Battery voltage: 48V Battery type: PzS Side shifter, 3rd valve, rear work lights, front work lights, roof cover, safety light,

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Fodpfxsy Uplxo Adlsph Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2020

Condition: used, lifting height: 4,650 mm, Year of construction: 2016, operating hours: 8,640 h, Year of manufacture: 2016 Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks Fpodpfx Asy Nw Abjdlsh

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Fedpfx Aowtg Inodljph Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,450 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Main spindle power: 22kW Fjdpfx Adowtg R Ajljph S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Fodpfx Adjy D Rypsljph Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 120 l, color: red, overall weight: 5,930 kg, digging bucket width: 600 mm, Year of construction: 2015, operating hours: 4,250 h, machine/vehicle number: AFVF6007995, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, standard shovel, Technical data: Weight: 5,930 kg Dimensions: 6,120 x 1,920 x 2,855 mm Maximum speed: 20 km/h Power: 40.8 kW (55.5 hp) The excavator is used and has been regularly maintained. Air conditioning available. Including MS03 accessories: Fpedoy D A Apepfx Adlsh 600 mm digging bucket KL4 1,500 mm hydraulic ditch cleaning bucket Häner HGS53 hydraulic hammer Kinshofer grab, 600 mm wide Ripper tooth