Used Doosan Dx225Lc for sale (292)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Fanuc 21IMB control system 2 pallets, 500x500 mm travel distances: 850x700x750 mm Kedoy Tagdepfx Ambjdl 60-tool changer

Condition: like new (used), Year of construction: 2018, Doosan Puma 2600, year 2018/11 Fanuc Excellent condition, only 1000 operating hours Max. turning diameter: 481 mm Max. turning length: 790 mm Chuck: 250 mm Kedjy Snuyjpfx Ambedl Spindle bore: 76 mm 12-position turret Tailstock Chip conveyor Documentation

Condition: like new (used), Year of construction: 2017, operating hours: 1,494 h, functionality: fully functional, Control: DOOSAN-FANUC i Series Table dimensions: 1300 x 570 mm T-slots on the table: 4 x 125 x 18H8 Max. table load: 1000 kg Kdedjy Smdaopfx Ambsl X-travel: 1050 mm Y-travel: 570 mm Z-travel: 510 mm Max. spindle speed: 12000 rpm (Direct drive) Taper: BT40 Rapid traverses X/Y/Z: 36 / 36 / 30 m/min Feed rates: 1 - 15000 mm/min Drive power: 18.5 / 11 kW Power requirement: 400V / 50-60 Hz / 32A Weight: 6500 kg Dimensions LxWxH: 2960 x 2372 x 2800 mm Accessories, Equipments - Chip conveyor - Coolant system - Spindle chiller - RENISHAW tool setter - RENISHAW workpiece probe without touch probe - Signal tower - 15-20 pcs of BT40 tool holders + pull stud and cutting tools - Transformer The machine was barely used. It produced parts for Jet-Skies (mostly plastic parts). Very nice machine. It is ready to buy. Under power in our showroom in Hungary.

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, lifting height: 6,050 mm, free lift: 1,930 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), fork length: 1,200 mm, Weights Empty weight: 8.700 kg Functional Lifting capacity: 5.000 kg Maximum passing height: 275 cm Number of valves: 3 Supply voltage: 80 V CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Kodpfx Amjy S Uxfobodl Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Front tyre size: non-marking Rear tyre size: non-marking Fork carriage: Sideshifter Transport dimensions (LxWxH): 3,09x1,47x2,75 Additional information Please contact Stephan Honinx or Dietmar Pack for more information = Additional options and accessories = - 3rd valve - Battery charger - Free lift - Super elastic tyres

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, lifting height: 6,050 mm, free lift: 1,930 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), fork length: 1,800 mm, Weights Empty weight: 8.700 kg Functional Kodpfx Ajy S Uw Ujmbsdl Lifting capacity: 5.000 kg Maximum passing height: 275 cm Number of valves: 3 Supply voltage: 80 V CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Front tyre size: non-marking Rear tyre size: non-marking Fork carriage: Sideshifter Transport dimensions (LxWxH): 3,09x1,47x2,75 Additional information Please contact Stephan Honinx, Dietmar Pack or Simon Pack for more information = Additional options and accessories = - 3rd valve - 4th valve - Battery charger - Free lift - Super elastic tyres

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER YEAR OF MANUFACTURE: 2019 CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 Kodpfjy Tvbkex Ambsdl TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: excellent (used), Year of construction: 2015, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant Kdedew I Tnijpfx Ambel

Condition: good (used), functionality: fully functional, power: 240 kW (326.31 HP), fuel type: diesel, overall weight: 24,000 kg, Year of construction: 2022, operating hours: 11,350 h, Equipment: air conditioning, all wheel drive, cabin, standard shovel, Doosan DL420, year of manufacture 2022, with approximately 11,350 operating hours, in good condition, immediately ready for operation, 240 kW. Transport and delivery are possible. Inspections can be arranged, including on weekends. We also prepare export/customs documents. Kdedpfxey S Elve Ambol

Condition: new, functionality: fully functional, Key features of the DOOSAN T4005 Drill Tap Center may include: High Precision: The DOOSAN T4005 Drill Tap Center is engineered for precise drilling and tapping results, delivering consistent quality in manufactured components. Kedpey Sv Tqjfx Ambodl High-Speed Spindle: Featuring a powerful, high-speed spindle, the machine efficiently processes various materials—such as metals, plastics, and composites—while maintaining productivity. Multi-Axis Capability: Many DOOSAN T4005 models are equipped with multiple axes, enabling complex machining operations and greater flexibility in component production. Automatic Tool Changer: The machine often includes an automatic tool changer, allowing for smooth transitions between different tools and minimizing setup times to enhance efficiency. User-Friendly Interface: The CNC system typically offers an intuitive user interface, simplifying programming, process monitoring, and operation for users at all experience levels. Robust Construction: Designed for industrial use, the machine is built with high-quality materials and components to ensure durability and continuous operation. Customization Options: Depending on the manufacturer, the CNC machine may offer various customization options to adapt to specific machining or production requirements.

Condition: used, Year of construction: 2019, operating hours: 650 h, load capacity: 2,525 kg, lifting height: 4,710 mm, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, Equipment: head guard, DOOSAN D30 GP Lifter Front Forklift * Hydraulic fork positioner * Sideshift * Hydraulic power steering Ksdpfx Ajy Srinembjdl * FFT triplex mast * Water-cooled diesel engine with 34.2 kW power output * Overhead guard * Lighting system * Integrated towing device ----* Fork length: 1200 mm * Mast height: 4710 mm * Front tyre dimensions: 28x9-15 * Rear tyre dimensions: 6.50-10 * Year of manufacture: 05/2019 ----Vehicle number: 12035----Subject to errors and prior sale----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your requirements and suggestions and we will take care of the rest. Among others, we can offer the following services for an additional charge:----* Trade-in of your used vehicle * TÜV/SP inspection * Complete export processing * Financing arrangements * Application for export license plates * Vehicle transport * Vehicle registration * Recoveries and transport of vehicles ----YOUR VTS TEAM

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a load capacity of 3,000 kg and 2 doors. Unladen weight: 4,600 kg. Lifting height: approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, work lights, fork length approx. 1 m, windshield wiper, power steering, suspension seat, reversing alarm, 4-cylinder engine. Kdedpfey S Ng Dox Ambol Daily purchase of commercial vehicles, trade-ins also possible. Price: €6,900.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,000 h, overall weight: 3,900 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Kodpfx Ajx D I T Rsmbsdl Machine Benefits Qualitative Machine Benefits • Internal machining adapter/shell kit • Preciflex active holder additional adapter set • A set of little used tool set is available for an additional price. Technical Machine Benefits • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) • End surface treatment holder • Internal machining holder • Double external turning tool holder (both sides) • Triple internal machining holder • Axial active tool holder (left side) • Axial active tool holder (left side) • Radial active tool holder Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm Kdedpsx D H Aqefx Ambsl • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: FANUC, total height: 2,700 mm, total length: 2,316 mm, total width: 2,200 mm, table width: 790 mm, table length: 435 mm, table load: 400 kg, overall weight: 5,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 660 mm, spindle motor power: 11 W, spindle nose: ISO 40, number of spindles: 20, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​3-axis vertical machining center with FANUC 0i-MF CNC Ksdpfxoy Iw U Io Ambsdl

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 7,710 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Kjdpfsy N H Erjx Ambedl Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Good Front tire type: Solid rubber Front tire condition: 80 – 100% Rear tire type: Solid rubber Rear tire condition: 80 – 100% Description: Diesel forklift DOOSAN D30G – 3,000 kg lifting capacity – Year of manufacture: 2008 – Sideshift – TRIPLEX free lift mast – Overall height: 2.2 m – Lifting height: 4.7 m – 7,710 operating hours according to meter – 4-cylinder YANMAR diesel engine with 58 HP – Solid rubber tires approx. 80% – Semi-cab, lighting system – Simple, mechanical forklift – Good condition – PRICE: 11,000 EUR excluding VAT Sideshift Third valve, rear working lights, front working lights, semi-cab, heating, full cab.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,790 h, load capacity: 2,500 kg, lifting height: 6,100 mm, fuel type: diesel, mast type: triplex, construction height: 2,630 mm, power: 44 kW (59.82 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Solid rubber Front tires condition: 60 - 80% Rear tires type: Solid rubber Rear tires condition: 60 - 80% Ksdpfxsy N H Dzs Ambedl Description: Diesel forklift DOOSAN D25G -- 2.5 ton lifting capacity -- year of manufacture 2017 -- side shift -- TRIPLEX free lift mast -- overall height 2.63 m -- lifting height 6.10 m -- 4,790 operating hours according to counter -- forklift with 4-cylinder YANMAR diesel engine, 59 HP -- mechanical hydraulic levers -- solid rubber tires approx. 70% -- work lights -- simple, mechanical forklift with very good visibility through mast -- good condition -- the front loader can be inspected on site -- affordable delivery options! Features: Side shift, 3rd valve, rear work light, front work light, roof cover.

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Manufacturer: Doosan Model: DL200 Kedsy S S Epepfx Ambsdl Year of manufacture: 2018 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc Kjdpjy Sblrofx Ambodl x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg

Condition: used, color: other, Year of construction: 2019, operating hours: 4,723 h, Power internal combustion engine: 173 HP (127 kW) GVW: 24.900 kg Make of engine: Doosan CE mark: yes Serial number: 0001828 Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.  Kdedpfx Aey R A Raembsl

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,500 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 1,130 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 21i-T, number of axes: 2, Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details. • Condition: Fully functional, ready for demonstration; machine still under power; enhanced operational efficiency and precision • Capacities: max workpiece diameter 550 mm; swing over bed 710 mm; distance between centers 1230 mm; spindle center height 1067 mm; bed width across saddle slideway 280 mm • Spindle: nose ASA A2-8; spindle hole taper MT No. 7; spindle bore Ø102 mm; front bearing Ø150 mm; bearings: roller/angular + thrust; speed override 50–150; motor AC 18.5/22 kW (continuous/30 min) Kdedpfx Aey Hrgcombjl • Turret/tooling: V12 turret; standard tool shank 25 mm; max boring bar Ø50 mm • Axes: rapid traverse rate X: 20, Z: 24 (units as provided) • Control/electrics: NC unit F-21iTB; total power consumption 31 kVA • Pumps: hydraulic pump motor AC 1.5 – 4P kW; way lubricating pump motor AC 0.02 – 4P kW; coolant pump motor AC 0.4 – 2P • Other features: steady-rest and tailstock move when hooked to the carriage Additional equipment • Programmable tailstock • 12" 3-jaw chuck • Self-centring steady rest SLU 3.1 • Automatic tool measuring arm Technical Specification Counter Spindle No Driven Tools No

Condition: used, CE certified Model: Puma 400LB CNC Lathe Year: 2012 Max cutting diameter: 550 mm Max cutting length: 2,093 mm Spindle speed: 2,000 rpm 15” chuck Kedpfoy R Tcajx Ambedl 10-position turret Tool setter (to be installed) Hydraulic steady rest, SMW, 20–165 mm Chip conveyor Fanuc control Video available on request.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool load monitoring -tool breakage detection with needle Kedey Tmlmopfx Ambjdl -automatic doors -robot interface -4th axis preparation -HIWIN RCV-320 rotary table -HIWIN RTS-320 support -Hydraulic aggregate 200 bar 3 A+B -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control system; Thermal sensors for maximum precision; Y-axis; Subspindle with collet chuck; Kjdpfx Amey R S Uzjbjdl Spindle bore 80 mm (main spindle); All axes with box ways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders included; Robot loading by Halter available upon request! Photo attached. An automatic door can be retrofitted for this purpose. In Germany, complete commissioning upon request. All at additional cost!

Condition: used, Year of construction: 2011, operating hours: 10,740 h, Location: Lleida (Lleida) The used Doosan DL300 wheel loader is engineered for operators to work efficiently for hours under excellent conditions. Offers more space, improved visibility, air conditioning, a very comfortable seat, ample storage, and additional features. Bucket capacity: 3 m3 (3,000 l). Second-hand wheel loader for sale, equipped with a front bucket, ideal for building construction, mining, roadworks, highways, tunnels, or hydraulic dam projects. Used Doosan DL300 brand loader. This Doosan DL300 loader outperforms the competition, featuring technologies that lower fuel consumption and set new standards in cab comfort. Ksdsyzcdujpfx Ambsdl CE

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 7,260 h, Year of manufacture: 2017 Kjdpfjxxkf Sox Ambedl Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV