Vertical turning lathe

DOOSAN V550M

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm Bjdpevzln Rjfx Acfslp z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. Blodpeyaazmjfx Acfep In 2020, the milling gearbox was renewed.

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis Bjdpfov A Uw Dox Acfolp 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Warranty: none Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Bsdpfx Acewkg T Sjfolp Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Bsdoxzp Rlopfx Acfjlp Max boring length if using the 500mm hollow spindle 4000mm

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Bodexgic Ejpfx Acfjlp Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: used, faceplate diameter 2500 mm swing diameter 2700 mm turning height 1600 mm turning speed range - milling 1,18 - 32,5 U/min turning speed range - milling 4,25 - 117 U/min workpiece weight 10000 kg side head - cross travel 800 mm ram head - cross travel 45 degrees - 1000 mm ram head - cross travel 30 degrees - 1000 mm Bsdpsyuqidefx Acfslp total power requirement 80 kW 2-Axis D.R.O. 5 positions turret

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, spindle speed (max.): 2,000 rpm, table length: 4,000 mm, table width: 2,000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS MACH-ID 9328 Make: SACHMANN RAMBAUDI Type: MP-212 HS Control: HeidenHain iTNC530 Year: 2007 KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm Spindle extention L = 600 mm with 2000 Rpm 3D Measuring probe MP60 ATC Chain 80 Positions Coolant system 1320 L with 4,8 Bar Rotary indexing table  2000 x 1600 x 15 ton V-Axis (in feed) 1500 mm Rotation 3 U/Min Bledpox Nh H Dsfx Acfsp HeidenHein RON 700 encoder for Table rotation Ram size 500 x 500 with 56 kW Chip conveyor  X-Axis: 6000mm Y-Axis: 2000mm Z-Axis: 1400mm Table Length: 4000mm Table Width: 2000mm Table load: 25000 Power on spindle: 37kW Spindle speeds: 2000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 15000mm Width: 8000mm Height: 6000mm Weight: 85000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2026, faceplate diameter 1.600 mm swing diameter 2.000 mm turning height 1.400 mm Bedoyiu N Djpfx Acfslp Control Fanuc max. Torque 23.863 Nm cutting capacity max. 3.000 kgf max. workpiece weight 10.000 kg table diameter 1.600 mm table speeds min power capacity - table 37/45 kW resolution 0,001 ° Working speed 0 - 1.200 °/min max. table speed 3,333 1/min Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm x-axis 1.900 mm z-axis 900 mm cross rail adjustment 700 mm tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 80 kVA weight of the machine ca. 34,0 t dimensions of the machine ca. 7,50 x 6,50 x 5,20 m CNC - Vertical Turret Lathe HANKOOK - VTC 160 E - NEWMACHINE

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Bedsu Nyxwopfx Acfolp Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands