Multi-spindle machine

INDEX MS32-6

Condition: good (used), Year of construction: 2018, Further details will be provided via email upon request. Fsdpfe Af U Dcox An Esgi

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm Fodpfx Anom Nb Rie Ejgi >max. piece length 340 mm

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 Fgjdpfxom Amf De An Eji travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 32 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : fixed X axis, Z axis controlled by CNC - slide unity 2.1 : fixed X axis, Z axis controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : fixed X axis, Z axis controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : fixed X axis, Z axis controlled by CNC - slide unity 5.1 : fixed X axis, Z axis controlled by CNC Fedpfeuhaxlsx An Eogi - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - counter-spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar loader - Coolant tank with HP pump - KNOLL chips conveyor - Parts catcher with conveyor in position 6 - Cross drilling device in position 3.1 et 4.1

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Fgjdsg S Tx Ispfx An Eei

Condition: not inspected (used), Hydromat HB32-636 Fjdoi Ewr Tepfx An Ejgi Manufacturer: Pfiffner Serial number: 6.07.043-7 (4.0m) Number of units produced to date: 8,960,881 Footprint: 11m x 5m

Condition: used, TECHNICAL DETAILS - number of axes : 18 - number of spindles : 6 - max round bar diameter : 32 [mm] - max clearance in hexagonal bar : 28 [mm] - spindle speed : 400 - 5 000 [rpm] - capacity of the sub-spindle : 32 [mm] - number of the cross slides : 5 - strokes of the cross slides Fgjdpfx Aeuhaqusn Eoi in position 2 and 3, X x Z : 60 x 80 [mm] - strokes of the cross slides in position 1, 4 and 5 , X x Z : 60 x 100 [mm] - size : 8 300 x 2 300 x 2 240 [mm] - weight : 11 500 [kg] - number of working hours : 52066 [h] EQUIPMENT - numerical control TORNOS PNC DECO - spindle stop pos 4 - numerical sub-spindle with counter operation device - parts catcher with conveying strip - 5 turning tool-holders GOLTENBODT with collar - 1 cutting-off tool-holder GOLTENBODT - 4 fixed drillers - 1 driven driller - chips conveyor - high pressure pump - integrated bar feeder TORNOS MSF 832/6 - lamp

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 Fgsdjuhbwispfx An Eei - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration

Condition: used, Cnc multispindle lathe TORNOS MULTIDECO 26/6 Fjdeuhaqhjpfx An Ejgi

Condition: used, Year of construction: 2005, FANUC 160 I-MB control KNOLL chip conveyor, type 1200 S-2, made in 2012 Fsdefxgiyopfx An Eegi 4 workstations