Cnc multispindle lathe

TORNOS MULTIDECO 26/6

Condition: good (used), Year of construction: 1999, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T-61796, year of manufacture 1999, FANUC control, chip conveyor, bar loader IEMCA Sir 32F, No. 98072003, year of manufacture 1998 Lhsdsunvwlepfx Abnod

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Lhedpfx Ajhrihysbnod

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel Ledpom Nb Riefx Abnshd >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading Lodpfx Abjm Amf Donshd With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Ledpfx Absg S Tx Ienohd

Condition: not inspected (used), Hydromat HB32-636 Manufacturer: Pfiffner serial number: 6.07.043-7 (4,0m) Lhedpfxji Ewr Te Abnsd Number of pieces produced so far: 8,960,881 pcs. footprint: 11m x 5m

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm Lsdpfjwgi D Ejx Abnehd control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Lhedpfx Aberqzzpenjd Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 32 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : fixed X axis, Z axis controlled by CNC - slide unity 2.1 : fixed X axis, Z axis controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : fixed X axis, Z axis controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : fixed X axis, Z axis controlled by CNC - slide unity 5.1 : fixed X axis, Z axis controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC Lhjdsuhaxlepfx Abned - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - counter-spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar loader - Coolant tank with HP pump - KNOLL chips conveyor - Parts catcher with conveyor in position 6 - Cross drilling device in position 3.1 et 4.1

Condition: used, TECHNICAL DETAILS - number of axes : 18 - number of spindles : 6 - max round bar diameter : 32 [mm] - max clearance in hexagonal bar : 28 [mm] - spindle speed : 400 - 5 000 [rpm] - capacity of the sub-spindle : 32 [mm] - number of the cross slides : 5 - strokes of the cross slides in position 2 and 3, X x Z : 60 x 80 [mm] Lodpfx Abjuhaquonohd - strokes of the cross slides in position 1, 4 and 5 , X x Z : 60 x 100 [mm] - size : 8 300 x 2 300 x 2 240 [mm] - weight : 11 500 [kg] - number of working hours : 52066 [h] EQUIPMENT - numerical control TORNOS PNC DECO - spindle stop pos 4 - numerical sub-spindle with counter operation device - parts catcher with conveying strip - 5 turning tool-holders GOLTENBODT with collar - 1 cutting-off tool-holder GOLTENBODT - 4 fixed drillers - 1 driven driller - chips conveyor - high pressure pump - integrated bar feeder TORNOS MSF 832/6 - lamp