CNC Lathe

INDEX G 200

Condition: excellent (used), Year of construction: 2018, Technical Data Main spindle, counter spindle Turning length: mm 660 Spindle bore: mm 65 Chuck diameter: mm 165 Speed max.: min-1 6,000 Power (100% / 40% duty cycle): kW 20 / 24 Torque (100% / 40% duty cycle): Nm 125 / 170 C-axis resolution: degrees 0.001 Slide travel X: mm 710 Rapid traverse: m/min 60 Feed force: N 6000 Turret, lower / upper Speed max.: min-1 7,200 Power max.: kW 9 Torque max.: Nm 16 Milling spindle Tool system: HSK-A40 Speed max.: min-1 7,200 Torque (25% duty cycle): Nm 52 Power (25% duty cycle): kW 22 Tool holder 1 Slide travel X: mm 230 Rapid traverse: m/min 30 Feed force: N 6000 Slide travel Y: mm +/-65 Rapid traverse: m/min 15 Feed force: N 10,000 Slide travel Z: mm 845 Rapid traverse: m/min 50 Feed force: N 6000 3 Turrets Turret 1 YB - 6-position tool changer HSK Turret 2 Y Hsdpfx Aez Sywcobajw Turret 3 y Year of manufacture 2018 Control system Siemens SINUMERIK 840D sl Turning length up to 660 mm Spindle bore 65 mm Milling spindle with 360-degree B-axis Production hours approx. 7,200 h Turret, lower and upper Feature Specification Stations and tool positions 14 stations per turret (VDI 25), a total of 42 tool positions Maximum speed 7,200 min⁻¹ Maximum power 9 kW Maximum torque 16 Nm Milling spindle Feature Specification Tool system HSK-A40 Tool magazine 6 tool positions B-axis 360 degrees Maximum speed 7,200 min⁻¹ Torque at 25 percent duty cycle 52 Nm Power at 25 percent duty cycle 22 kW Tool holder 1 Feature Specification X-axis 230 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±65 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 845 mm, rapid traverse 50 m/min, feed force 6,000 N Tool holder 2 Feature Specification X-axis 140 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±45 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 810 mm, rapid traverse 50 m/min, feed force 6,000 N Workpiece removal Feature Specification Design Gantry part removal system with conveyor belt Maximum workpiece length 200 mm Maximum workpiece weight 5 kg Dimensions and connection values Feature Specification Length × Width × Height 5,355 × 2,235 × 2,400 mm Weight approx. 8,500 kg Connected power 42 kW Bar feeder magazine and accessories Feature Specification Bar feeder magazine INDEX MBL 65 Coolant system KNOLL system with band filter and high-pressure pump 80 bar Automation Automatic door Accessories Tool holder

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm Hjdpfxev T Nqae Abaew - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle diameter: 60 mm, We are selling our INDEX G200. The machine is in excellent condition and can be inspected while powered on. It is being sold including a bar feeder, chip conveyor, and various tools. The machine has only been operated with oil. Hedpoz I Rxnjfx Abaew The machine has X/Y/B axes!

Condition: refurbished (used), functionality: fully functional, turning diameter: 200 mm, rotational speed (max.): 6,000 rpm, Control system: Siemens 840 Dsl General Bar diameter (HS): 60 mm Bar diameter (GS): 60 mm Milling spindle Milling spindle: HSK D-50 Tool holder I (X/Y/Z/B) Technology: Tool turret with 14 stations Tool holder: HSK D-50 Tool drive: 6,000 rpm X-axis: 155 mm Y-axis: +/- 60 mm Z-axis: 590 mm B-axis: 360° swiveling Tool holder II (X/Z) Technology: Tool turret with 14 stations Tool holder: VDI 25 W-shank Tool drive: 6,000 rpm X-axis: 105 mm Hsdpfx Aboz Ip Iusasw Z-axis: 400 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Switchable coolant pump, 8/80 bar Bar loader: UNIMAG interface Control function: “Guide unit” for cross slide 2 Warranty: 12 months

Condition: used, Year of construction: 1998, turning diameter 200 mm turning length 400 mm control Siemens type C 200-4 840 C spindle passage 65 mm Tool changer 2 x14 Pos. live tooling 2x Revoler weight of the machine ca. 4 t Main and counter spindle 3-jaw chuck with numerous jaws Hsdpfoyqvygex Abasw Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1998, condition: used, A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment. Hsdpfx Aboz Hzdxoaew

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Hedeu T Rgkepfx Abaew

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. Hjdpfxsxc I Dgs Abaew As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Year of construction: 1995, condition: ready for operation (used), Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016. Hsdjtdwwmjpfx Abajw

Year of construction: 2003, condition: ready for operation (used), Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. Hjdetdwwqjpfx Abasw

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Hjdpfx Abew Tc Nyeajw

Year of construction: 1995, condition: ready for operation (used), A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible. Hsdpfxeym Dgmo Abajw

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - C axis indexing precision : 0.001 [°] - Z stroke : 445 [mm] TURRET 1 - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 105/400 [mm] - Y stroke : 120 [mm] - B Axis stroke : +90/-270 [°] - Tool type : VDI 25 - Live tools speed : 6000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4.975 X 2.890 [mm] - Machine height : 2.050 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840C - Coolant tank Hodpfxou Hadhj Abaew * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, Hedpfot U R Hzjx Abajw collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: excellent (used), Year of construction: 1998, Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Parts conveyor, chips conveyor, available. Spindels bore 42 mm 2x 3 jaws chuck 160 mm Hedpfx Aswq Rwnobasw 2x Hainbuch collets chuck 42 mm